Tender For Maintenance Of Drinking Water Supply Schemes In North Tripura District Under Nrdwp/Rws/Ffc Fund During The Year 2026-27/Sh:- Periodical Cleaning Of Intake Well, maintenance Of Vt Pump Motors & Other Allied Works Etc. At Kanchanpur Surface
Tender Overview
Project Description
Tender for Maintenance Of Drinking Water Supply Schemes In North Tripura District Under Nrdwp/Rws/Ffc Fund During The Year 2026-27/Sh:- Periodical Cleaning Of Intake Well, maintenance Of Vt Pump Motors & Other Allied Works Etc. At Kanchanpur Surface Water Treatment Plant (0.65Mgd) Under Dws Sub-Division Kanchanpur During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Pumping out water by Diesel engine Pump as per Specification of E-I-C. |
| 2 | Labour charge for cleaning of deposited sand & clay etc. from intake well including allied accessories, labour etc as per direction of the Engineer in charge. |
| 3 | i) Labour charge for loosening of settled sand and clay inside intake well. |
| 4 | ii) Labour charge for lifting of deposited sand and clay from inside Inatke well up to ground level. |
| 5 | iii) Labour charge for carriage of lifted sand and clay from Intake well to dumping yard. |
| 6 | Labour charge for cleaning of deposited sand & clay etc. from Clariflocculator including allied accessories, labour etc. as per direction of the Engineer in charge. |
| 7 | i) Labour charge for loosening of settled sand and clay from Clariflocculator. |
| 8 | ii) Labour charge for lifting of deposited sand and clay from inside clariflocculator up to ground level. |
| 9 | iii) Labour charge for carriage of lifted sand and clay from Clariflocculator to dumping yard. |
| 10 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 11 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size) |
| 13 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 14 | Supplying bamboo (1st class) 85 mm to 100 mm dia and making shoe with end tappered upto 300 mm from the bottom of the bamboo as per drawing and specification. |
| 15 | Handling and driving bamboo (1st class) 85 mm to 100 mm dia upto the length required by heavy hammer as per drawing and specification |
| 16 | Providing and fitting, fixing bamboo (1st class) 85 mm to 100 mm dia for horizontal, diagonal bracing, strut etc. with nails / spikes and binding wire (GI 2.0 mm) as per drawing and specification |
| 17 | Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minmum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
| 18 | Providing and fixing muli bamboo plain oven tarja walling in compound fencing, strengthening with single split bamboo battens ( both side ) at 450 mm centre to centre and tied with G.I. wire 1.0 mm complete as per specification. |
| 19 | Hiring charge of welding set of single phase with operating staff and carrying upto the site ofwork including loading and unloading (both way) complete as per direction of Engineer-in-charge. |
| 20 | Labour charge for fitting fixing of CI sluice valve class-I with cap complete by providing nuts andbolts, 3mm thick rubber insertion etc.(Tail piece if required will be paid separately) (only C.I sluice valve class-I with will be supplied by deptt. at free of cost) |
| 21 | 200 mm dia |
| 22 | 150 mm dia. |
| 23 | Rewinding of Motor suitable V.T. pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.iii) 35 - 40 HP |
| 24 | Repairing of V.T. pumps by providing and replacing of G.M. bush for suction case / discharge case ( conforming to IS : 1710 ) as per specification and the direction of the Engineerin- charge.ii) for 20000 / 27500 GPH capacity V.T. pump |
| 25 | Repairing of V.T. pumps by providing and replacing of Rubber bush for bowel ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge.ii) for 20000 / 27500 GPH capacity V.T. pump |
| 26 | Repairing of V.T. pumps by providing and replacing of MS lock ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge.ii) for 20000 / 27500 GPH capacity V.T. pump |
| 27 | Repairing of V.T. pumps by providing and replacing of bronze impeller ( conforming to IS : 1710 ) as perspecification and the direction of the Engineer-in-charge.ii)for 20000 / 27500 GPH capacity V.T. pump |
| 28 | Repairing of V.T. pumps by providing and replacing of SS shaft ( SS-410) ) as per specification and the direction of the Engineer-in-charge.ii) for 20000 / 27500 GPH capacity V.T. pump |
| 29 | Repairing of V.T. pumps by providing and replacing of CI bowel case as per specification and the direction of the Engineer-in-charge.ii) for 20000 / 27500 GPH capacity V.T. pump |
| 30 | Repairing of V.T. pumps by providing and replacing of CI suction/discharge case as per specification and the direction of the Engineer-in-charge.ii. for 20000 / 27500 GPH capacity V.T. pump |
| 31 | Repairing line / top shaft of different capacity V.T. pumps by welding, grinding, threading, centering etc as per specification and the direction of the Engineer-in-charge. |
| 32 | Repairing of V.T. pumps by providing and replacing of G.M. bush for bowel ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge.Ii). for 20000 / 27500 GPH capacity V.T. pump |
| 33 | Labour charge for lowering & fifting fixing of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of the Engineer-in-charge. |
| 34 | Labour charge of lifting of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender