Tender For Maintenence Of Drinking Water Supply Schemes In North Tripura District Under Nrdwp/Rws/Ffc Fund During The Year 2026-27/Sh:- Re-Winding, Repairing Of Different Types Of Pump Motor Including Lifting & Lowering Of Submersible Pump Motor And
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
19413
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenence Of Drinking Water Supply Schemes In North Tripura District Under Nrdwp/Rws/Ffc Fund During The Year 2026-27/Sh:- Re-Winding, Repairing Of Different Types Of Pump Motor Including Lifting & Lowering Of Submersible Pump Motor And All Allied Works Under Laljuri Rd Block Area Within The Jurisdiction Of Dws Sub-Division,Kanchanpur.
BOQ
| Sl. No. | Item Description |
| 1 | Labour charge of lifting of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block as per direction of the Engineer-in-charge. |
| 2 | Labour charge for lowering & fifting fixing of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of the Engineer-in-charge. |
| 3 | Labour charge for lifting of Submersible pump motor set (2HP/3HP) of 70 ft to 100 ft column pipe complete as per direction of the Engineer-in-charge. |
| 4 | Labour charge for lowering of Submersible pump motor set (2HP/3HP) at a depth of 70 ft to 100 ft column pipe including fitting fixing nuts & bolts etc complete as per direction of the Engineer-in charge. |
| 5 | Supplying fitting fixing of following spare parts of approved quality suitable for pump motor set etc as per direction of the engineer in charge.B) Full threaded nut bolt of 10mm dia and 50mm long. |
| 6 | Providing & fitting fixing of G.I. flange ( 10 mm wall thickness )by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge.. |
| 7 | i) For 50 mm dia |
| 8 | ii) For 65 mm dia |
| 9 | iii) For 80 mm dia |
| 10 | Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer-incharge ( G.I. pipe will be provided by the agency at his own cost & risk). |
| 11 | i) For 50 mm dia G.I. pipe with 10 mm thick GI flange |
| 12 | ii) For 65 mm dia G.I. pipe with 10 mm thick GI flange |
| 13 | iii) For 80 mm dia G.I. pipe with 10 mm thick GI flange |
| 14 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 15 | i) 40 mm dia |
| 16 | ii) 50 mm dia |
| 17 | iii) 65 mm dia |
| 18 | iv) 80 mm dia |
| 19 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 20 | i) 50 x 40 mm dia |
| 21 | ii) 65 x 50 mm dia |
| 22 | iii) 80 x65 mm dia |
| 23 | Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge |
| 24 | i) 40 mm dia |
| 25 | ii) 50 mm dia |
| 26 | iii) 65 mm dia |
| 27 | iv) 80 mm dia |
| 28 | Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge. |
| 29 | i) 40 mm dia |
| 30 | ii) 50 mm dia |
| 31 | iii) 65 mm dia |
| 32 | iv) 80 mm dia |
| 33 | Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.i.2.00 HP motor suitable for 2000GPH capacity submersible pump set |
| 34 | Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 35 | Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 36 | Repair and mtc of 15HP/17.5HP motor suitable for 7500 GPH capacity Submersible pump set by complete dismentaling including providing and fitting fixing of PVC (IS-8783-1978) insulated electro grade copper(IS 613-1984) conductor winding in stator and all necessary spare parts and reassembling the same in/c servicing of motor and necessary trial run as per specification and direction of the Engg-In-Charge. |
| 37 | Repair and maintenance of 20 / 22.5 HP Motor suitable for 10000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 38 | Repair and maintenance of 2500 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 39 | i) Bronze/SS Impeller |
| 40 | ii) Bronze grade LTB 2 / Cutless rubber bush |
| 41 | iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 42 | VIII) SS impeller lock |
| 43 | iX) SS half coupling |
| 44 | X)Stud bolt & nut |
| 45 | Repair and maintenance of 5000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 46 | i) Bronze/SS Impeller |
| 47 | ii) Bronze grade LTB 2 / Cutless rubber bush |
| 48 | iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 49 | iv) Stainless steel pump shaft |
| 50 | VIII ) SS impeler lock |
| 51 | ix ) SS half coupling |
| 52 | X) Stud Bolt and Nut |
| 53 | Repair and maintenance of 7500/10000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 54 | i) Bronze/SS Impeller |
| 55 | ii) Bronze grade LTB 2 / Cutless rubber bush |
| 56 | iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 57 | iv) Stainless steel pump shaft |
| 58 | VIII ) SS impeler lock |
| 59 | VIII ) SS half coupling |
| 60 | iX) Stud Bolt and Nut |
| 61 | Repair and maintenance of 15000 / 20000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification anddirection of the Engineer-in-charge. |
| 62 | i) Bronze/SS Impeller |
| 63 | ii) Bronze grade LTB 2 / Cutless rubber bush |
| 64 | iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 65 | VIII ) SS impeler lock |
| 66 | VIII ) SS half coupling |
| 67 | iX) Stud Bolt and Nut |
| 68 | Providing and fitting fixing of thrust bearing of S.K.F. make or equivalent for submersible motor. |
| 69 | a) 30 / 40 H.P. |
| 70 | b) 22.5 / 20 H.P. |
| 71 | c) 12.5 / 10 H.P. |
| 72 | d) 7.5 / 5 H.P Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender