Tender For Lot-Ii Package : Hydro-Mechanical Works For All Gates And Pressure Shaft Liners For The Implementation Of The 240 Mw Uri-I Stage-Ii H.E Project, Located Near Boniyar, Uri Villages In The Baramulla District Of Ut Of J&K, India
Tender Value
88.56 Crore
Estimated cost
Bid Submission
25 Sep 2026
20 days left
EMD
1.33 Crore
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lot-Ii Package : Hydro-Mechanical Works For All Gates And Pressure Shaft Liners For The Implementation Of The 240 Mw Uri-I Stage-Ii H.E Project, Located Near Boniyar, Uri Villages In The Baramulla District Of Ut Of J&K, India
BOQ
| Sl. No. | Item Description |
| 1 | Surge Shaft Gate & Rope Drum Hoist |
| 2 | Surge Shaft Gate (Fixed wheel type) |
| 3 | First Stage Embedded Parts for 1.1 including air vent pipe (500 mm dia.) |
| 4 | Second Stage Embedded Parts with reception frame including dogging etc for 1.1 |
| 5 | Rope drum hoist complete in all respect and control equipment for 1.1 |
| 6 | Hoist supporting structure & trestle etc. for 1.1 |
| 7 | Mandatory Spare Parts (As per statement-IB) |
| 8 | Pressure Shaft Steel Liner/ Penstock |
| 9 | Steel transition of Pressure Shaft Steel Liner at D/s Surge shaft including matching piece with surge shaft reception frame |
| 10 | 5.0m circular steel liner of upper horizontal portion |
| 11 | 5.0m circular steel liner of upper vertical bend (UVB) |
| 12 | 5.0m circular steel liner of vertical pressure shaft |
| 13 | 5.0m circular steel liner lower vertical Bend (LVB) |
| 14 | 5.0m circular steel liner of lower horizontal portion |
| 15 | Steel manifold (Bifurcation) with inlet dia. 5.0m bifurcating into two branch pipes of internal dia. 3.25m each. |
| 16 | 3.25m circular steel liner branch of length 32.5m & 43m for respective units. |
| 17 | Anchor rings/ Thrust collar at suitable locations on the u/s of MIV |
| 18 | 3.25m circular steel liner (extra piece) of length 600mm. |
| 19 | Draft Tube Gates and Rope Drum Hoists |
| 20 | Draft Tube Gates (Fixed wheel type) |
| 21 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 3.1 |
| 22 | Second Stage Embedded Parts including dogging etc. for 3.1 |
| 23 | Rope drum hoist complete in all respect and control equipment etc. for 3.1 |
| 24 | Hoist supporting structure & trestle etc for Draft Tube gates etc. for 3.1 |
| 25 | Mandatory Spare Parts (As per statement-IB) |
| 26 | Tail Race Gate and Rope Drum Hoist |
| 27 | Tailrace Tunnel Gate (Fixed wheel type) |
| 28 | First Stage Embedded Parts for 4.1 |
| 29 | Second Stage Embedded Parts including dogging etc. for 4.1 |
| 30 | Rope drum hoist complete in all respect and control equipment for 4.1 |
| 31 | Hoist supporting structure & trestle etc for Tail Race gate for 4.1 |
| 32 | Mandatory Spare Parts (As per statement 1B) |
| 33 | Adit Gates |
| 34 | Adit Gates (Hinge type) |
| 35 | First Stage Embedded Parts for 5.1 |
| 36 | Second Stage Embedded Parts for 5.1 |
| 37 | Instrumentation and feeder pillars |
| 38 | As described in GTS/PTS |
| 39 | A). Following instruments shall also be provided at their respective locations complete in all respect:i) One (1) set of water level measuring system to indicate balance head condition of Surge Shaft Gate.ii) Two (2) sets of water level measuring system to indicate balance head condition of Draft Tube Gates.iii) One (1) set of water level measuring system to indicate balance head condition of TRT Gate. |
| 40 | B) Feeder pillars for all HM equipments |
| 41 | Mandatory Spare Parts (As per statement-IB) |
| 42 | Mandatory tools & tackles (As per statement-1A) |
| 43 | Surge Shaft Gate & Rope Drum Hoist |
| 44 | Surge Shaft Gate (Fixed wheel type) |
| 45 | First Stage Embedded Parts for 1.1 including air vent pipe (500mm dia.) |
| 46 | Second Stage Embedded Parts with reception frame including dogging etc for 1.1 |
| 47 | Rope drum hoist complete in all respect and control equipment for 1.1 |
| 48 | Hoist supporting structure & trestle etc. for 1.1 |
| 49 | Mandatory Spare Parts (As per statement-IB) |
| 50 | Pressure Shaft Steel Liner/ Penstock |
| 51 | Steel transition of Pressure Shaft Steel Liner at D/s Surge shaft including matching piece with surge shaft reception frame |
| 52 | 5.0m circular steel liner of upper horizontal portion |
| 53 | 5.0m circular steel liner of upper vertical bend (UVB) |
| 54 | 5.0m circular steel liner of vertical pressure shaft |
| 55 | 5.0m circular steel liner lower vertical Bend (LVB) |
| 56 | 5.0m circular steel liner of lower horizontal portion |
| 57 | Steel manifold (Bifurcation) with inlet dia. 5.0m bifurcating into two branch pipes of internal dia. 3.25m each. |
| 58 | 3.25m circular steel liner branch of length 32.5m & 43m for respective units. |
| 59 | Anchor rings/ Thrust collar at suitable locations on the u/s of MIV |
| 60 | 3.25m circular steel liner (extra piece) of length 600mm. |
| 61 | Draft Tube Gates and Rope Drum Hoists |
| 62 | Draft Tube Gates (Fixed wheel type) |
| 63 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 3.1 |
| 64 | Second Stage Embedded Parts including dogging etc. for 3.1 |
| 65 | Rope drum hoist complete in all respect and control equipment etc. for 3.1 |
| 66 | Hoist supporting structure & trestle etc for Draft Tube gates etc. for 3.1 |
| 67 | Mandatory Spare Parts (As per statement-IB) |
| 68 | Tail Race Gate and Rope Drum Hoist |
| 69 | Tailrace Tunnel Gate (Fixed wheel type) |
| 70 | First Stage Embedded Parts for 4.1 |
| 71 | Second Stage Embedded Parts including dogging etc. for 4.1 |
| 72 | Rope drum hoist complete in all respect and control equipment for 4.1 |
| 73 | Hoist supporting structure & trestle etc for Tail Race gate for 4.1 |
| 74 | Mandatory Spare Parts (As per statement 1B) |
| 75 | Adit Gates |
| 76 | Adit Gates (Hinge type) |
| 77 | First Stage Embedded Parts for 5.1 |
| 78 | Second Stage Embedded Parts for 5.1 |
| 79 | Instrumentation and feeder pillars |
| 80 | As described in GTS/PTS |
| 81 | A). Following instruments shall also be provided at their respective locations complete in all respect:i) One (1) set of water level measuring system to indicate balance head condition of Surge Shaft Gate.ii) Two (2) sets of water level measuring system to indicate balance head condition of Draft Tube Gates.iii) One (1) set of water level measuring system to indicate balance head condition of TRT Gate |
| 82 | B) Feeder pillars for all HM equipments. |
| 83 | Mandatory Spare Parts (As per statement-IB) |
| 84 | Mandatory tools & tackles (As per statement-1A) |
| 85 | Surge Shaft Gate & Rope Drum Hoist |
| 86 | Surge Shaft Gate (Fixed wheel type) |
| 87 | First Stage Embedded Parts for 1.1 including air vent pipe (500mm dia.) |
| 88 | Second Stage Embedded Parts with reception frame including dogging etc for 1.1 |
| 89 | Rope drum hoist complete in all respect and control equipment for 1.1 |
| 90 | Hoist supporting structure & trestle etc. for 1.1 |
| 91 | Pressure Shaft Steel Liner/ Penstock |
| 92 | Steel transition of Pressure Shaft Steel Liner at D/s Surge shaft including matching piece with surge shaft reception frame |
| 93 | 5.0m circular steel liner of upper horizontal portion |
| 94 | 5.0m circular steel liner of upper vertical bend (UVB) |
| 95 | 5.0m circular steel liner of vertical pressure shaft |
| 96 | 5.0m circular steel liner lower vertical Bend (LVB) |
| 97 | 5.0m circular steel liner of lower horizontal portion |
| 98 | Steel manifold (Bifurcation) with inlet dia. 5.0m bifurcating into two branch pipes of internal dia. 3.25m each. |
| 99 | 3.25m circular steel liner branch of length 32.5m & 43m for respective units. |
| 100 | Anchor rings/ Thrust collar at suitable locations on the u/s of MIV |
| 101 | 3.25m circular steel liner (extra piece) of length 600mm. |
| 102 | Draft Tube Gates and Rope Drum Hoists |
| 103 | Draft Tube Gates (Fixed wheel type) |
| 104 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 3.1 |
| 105 | Second Stage Embedded Parts including dogging etc. for 3.1 |
| 106 | Rope drum hoist complete in all respect and control equipment etc. for 3.1 |
| 107 | Hoist supporting structure & trestle etc for Draft Tube gates etc. for 3.1 |
| 108 | Tail Race Gate and Rope Drum Hoist |
| 109 | Tailrace Tunnel Gate (Fixed wheel type) |
| 110 | First Stage Embedded Parts for 4.1 |
| 111 | Second Stage Embedded Parts including dogging etc. for 4.1 |
| 112 | Rope drum hoist complete in all respect and control equipment for 4.1 |
| 113 | Hoist supporting structure & trestle etc for Tail Race gate for 4.1 |
| 114 | Adit Gates |
| 115 | Adit Gates (Hinge type) |
| 116 | First Stage Embedded Parts for 5.1 |
| 117 | Second Stage Embedded Parts for 5.1 |
| 118 | Instrumentation and feeder pillars |
| 119 | As described in GTS/PTS |
| 120 | A). Following instruments shall also be provided at their respective locations complete in all respect:i) One (1) set of water level measuring system to indicate balance head condition of Surge Shaft Gate.ii) Two (2) sets of water level measuring system to indicate balance head condition of Draft Tube Gates.iii) One (1) set of water level measuring system to indicate balance head condition of TRT Gate |
| 121 | B). Feeder pillars for all HM equipments. |
| 122 | SUB TOTAL FOR PRICE SCHEDULE-1 |
| 123 | SUB TOTAL FOR PRICE SCHEDULE-2 |
| 124 | SUB TOTAL FOR PRICE SCHEDULE-3 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender