Tender For Supply , Installation , Testing And Commissioning For Elv Work At Remaining Work Of Auditorium Building In Nagarparishd C Us At Jhunjhunu
Tender Value
1.96 Crore
Estimated cost
Bid Submission
20 Aug 2026
3 days left
EMD
3.92 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply , Installation , Testing And Commissioning For Elv Work At Remaining Work Of Auditorium Building In Nagarparishd C Us At Jhunjhunu
BOQ
| Sl. No. | Item Description |
| 1 | S&F following sizes (dia.) of ISI marked MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including making jhiri in the wall,clamps at suitable spacing, covering conduit and making good the same as required. |
| 2 | 20 mm |
| 3 | 25 mm |
| 4 | 32 mm |
| 5 | Providing & Fixing of DLP PVC adaptable trunking system for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . The trunking system shall have adaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. OEM have to submit NABL accrediated /CPET lab test reports /EN 50085-2-1 complaince certificate. |
| 6 | 80mm x 50mm |
| 7 | 100/105mm x 50mm |
| 8 | Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 9 | 1-2 Module |
| 10 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, U/UTP (Unscreened/Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by LSZH Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies ranging from 250 to 500 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. |
| 11 | Supply and Installation of unshielded/360 degree shielded PCB based Information outlets made of high impact plastic body with ABS, Flammability rating UL 94 V-0 with provision for protection against dust in jack or Faceplate, suitable for Cat 6/6A application complying to latest amendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat 6/6A standards at frequencies 250/ 500 MHz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have toolless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA 568 C.2 & ISO/IEC 11801 or latest standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM,Digital video and broadband/baseband analog video, Voice over internet protocol (VOIP) Specifications in existing modular/MS Boxes along with necessary connections as required. All as per pre approved by Engineer in charge. |
| 12 | Cat 6, Un-sheilded Information Outlet |
| 13 | Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture with dust cover, material should be High-impact, flame retardant, thermoplastic, UL listed material, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. OEM. Dimensions should be 86mm X 86mm as required complete in all respect. All as per pre approved by Engineer in charge. |
| 14 | Single Aperture |
| 15 | Supply, Installation, Testing and Commissioning of Rack mounted 19\\" 1U, 24 Port loaded, CRS chasis, powder coated, sheet steel, High-impact, flame retardant, thermoplastic, UL Listed, Modular Patch Panels with Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required. All as per pre approved by Engineer in charge. |
| 16 | Modular Patch Panel Loaded with Cat -6 I/O |
| 17 | Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP). |
| 18 | Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair) Patch Cord |
| 19 | 3 Mtr |
| 20 | Supply & Installation of IP-20 & IK-08 , Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19\\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required. |
| 21 | 15 U Rack with Width 600 mm & Depth 400 mm + 100 mm |
| 22 | Supply & Installation of IP-20 & IK-08 , Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet,Vertical Mounting Rail 1.6 MM with 'U'Marking, front sturdy sheet steel frame folded from one piece and welded with 5mm toughened glass door, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, Set of 75 mm height 4 castors, 2 of which have brakes, Accessories like: 5 Nos of 19\\" 1U Horizontal Cable manager, 2 Nos of vertical cable managers, 1 no. Keyboard Tray, 4 Nos of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 2 No of 19\\" 1U, mountable socket strips with 6 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable complete in all respect. |
| 23 | 42 U Rack with Width 800 mm & Depth 1000 mm with 3 no. Heavy Duty Sliduing Drawer |
| 24 | Supplying, installation, Testing and commissioning of following capacity 24 port POE Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snooping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.0Ǫ,Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snooping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.0P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.0p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.0ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. |
| 25 | Supplying, installation, Testing and commissioning of following capacity 24 port Non POE Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snooping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.0Ǫ,Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snooping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.0P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.0p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.0ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. |
| 26 | SITC of following diagonal size professional Display, 4k Resolution, Brightness(Typ.) 440 nit and above , Contrast Ratio-2000:1 and above, Viewing Angle(H/V)-178/178, Response Time(G-to-G) 8ms, Input: RGB- Analog D-SUB, Video- HDMI 2.0 (2), HDCP- HDCP 2.2, Audio- Stereo mini Jack, USB- Only F/W upgrade, Outputs: RGB- DP1.2(Loop- out), Audio- Stereo mini Jack, External Control- RS232C(in/out), RJ45, External Sensor Detachable type(IR Ambient). Operation Hour 24/7. mounting bracket etc. as required. |
| 27 | SITC of EN 54 / VDS certified Analog addressable Multi criteria photo thermal detector with mounting base & LED etc. as required. |
| 28 | SITC of EN 54 / VDS certified Analouge Addressable type Rate of Rise Heat Detectors with mounting base & LED etc. as required. |
| 29 | SITC of EN 54 / VDS certified Intelligent Addressable type loop powered auto aligned Beam detector having a coverage area with a distance of min. 5 m and max. 100 m, with auto drift compensation feature including transmitter and receiver unit with remote test features etc including the cost of all accessories, mouting arrangement Etc. as required. |
| 30 | SITC of EN 54 / VDS certified Addessable Manual Call point (MCP) with LED / FIRE Indication Etc. as required. |
| 31 | SITC of EN 54 / VDS certified Addressable sounder with strobe light, Loop powered from FACP with sound level 90 dB and programmable from the panel etc. as required. |
| 32 | SITC of EN 54 / VDS certified Addressable control (input/output) modules/ Relay / Monitor Module for shutting down lifts, control of Mechanical ventilation fans, Hooters, AHU's, Acknoledgement of Sprinkler system with potential free contact monitoring Etc. as required. |
| 33 | SITC of EN54 / VDS certified Microprocessor based intelligent, Analogue addressable,modular, Fire Alarm Control Panel with each loop capacity of 198 detectors/devices with minimum Loop length up to 1.2 KM and 500 mA loop power as per NFPA 72 approval. The Panel shall be able to give pin point location of addressable units via the address code for each unit. The Panel shall also be able to automatically switch off all control switches when-ever any Alarm is triggered. . The panel shall have 230 + 5 % volts power supply, Automatic battery charger, 24 AH 2 x 12V, SMF Lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 minutes during emergency condtion. Loop interface cards, communication module, Touch screen display unit to indicate Fire / Fault Signal of individual unit, inbuilt networking port( both RS485 & Ethernet), Serial port for printer, two supervisory inputs, two position key switch and USB port for programming.including the cost of all accessories Etc. as required. |
| 34 | 2 - Loop Panel |
| 35 | SITC of Workstation latest Intel® i7 processor, Intel Chipset motherboard, 08 GB RAM, 1 TB SATA HDD at 7200 rpm, with 2 x 4GB GPU type higher end Graphic card for H.265 compression technique with dual display ports/DVI/ HDMI port, Giga LAN Card, wireless Keyboard, wireless optical Mouse. |
| 36 | Supplying and drawing Fire Resistant flexible / stranded bare copper conductor, PVC / XLPE insulated, overall aluminium mylar tape shielded ATC drain wire and outer PVC sheathed industrial Instrumentation (shielded)cables voltage grade 300/500 V as per BS /EN 50288-7 in existing surface or recessed PVC/ MS conduit/casing capping / Cable tray / Open Duct making connections, testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for cables. |
| 37 | 2 x 1.5 Sq.mm Armoured With Outer Sheath in Red Color |
| 38 | Providing & Laying XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing commissioning etc. as required of following size. |
| 39 | 1.5 Sq. mm |
| 40 | 3 core |
| 41 | 8 core |
| 42 | 4.0 Sq. mm |
| 43 | 4 core |
| 44 | Supply and laying speaker cable of following size 2 core twin twisted multi stranded electrolytic grade copper conductor, overall PVC insulated and armoured cable (Blue colour) on surface/ above false ceiling including cost of GI spacers, saddles etc. as required. |
| 45 | 2.5 Sq.mm |
| 46 | Supply and laying PVC Insulated and PVC Round Sheathed Multi Core copper conductor (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing pipe / open trench / Cable tray / on surface including making connection etc. as required. |
| 47 | 2.5 sq.mm x 3 core |
| 48 | Supply & Laying of 2 Core size 0.5 sqmm copper shielded Cable for connectings Microphones with related conduits / fittings / termination, etc complete as required. |
| 49 | Supply, Fabricating & installing following sizes of perforated Powder coated MS cable tray with perforation not more then 17.5% in convenient section including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with GI suspenders including GI bolts & nuts , fastners, supports etc. as required. |
| 50 | 100mm x 50mm x 1.6mm |
| 51 | 150mm x 50mm x 1.6mm |
| 52 | SITC of IP Based 2MP Dome camera: 1/2.8\\" or larger Progressive Scan CMOS Sensor with resolution: (1920 x 1080) @30 fps of following lens size and IR Range. The camera should support H.264, H.265, MJPEG, Quad/Triple streaming profiles, Frame rate upto 1-30 fps,120dB WDR, 2DNR/3DNR, BLC. Camera should support Open standard to support ONVIF (PROFILE S, PROFILE G, PROFILE T), onboard storage upto 512 GB (SD card not included). The camera supports advanced Video Analytics (VA) including motion detection and alarm should be trigger on Tampering, Network disconnect, IP address conflict. CCTV should have password protection, privacy mask, IP address filtering, Metal Housing, Vandal-proof housing, IP67, IK10, DC 12V & PoE, Complete with Junction box for cable management. Operating Conditions within -20°C to 60°C or better. The MAC address of Camera/NVR must be registered in the name of OEM . Regulatory approvals include FCC, BIS/UL, CE. CCTV cameras must be BIS Registered, Cyber Security Certified by STQC as per IoTSCS and meet the Essential Requirement (ER) issued by MeitY for security. The CCTV OEM should have its service/ support center in Rajasthan. |
| 53 | 2.8/3.6/4 mm lens with 30 meter IR range |
| 54 | SITC of IP Based 2MP Bullet camera: 1/2.8\\" or larger Progressive Scan CMOS Sensor with resolution: (1920 x 1080) @30 fps, (As per site requirement). Should Support H.264, H.265, MJPEG, Quad/Triple streaming profiles, Frame rate upto 1-30 fps, 120dB WDR, 2DNR/3DNR, BLC. Camera should support Open standard to support ONVIF (PROFILE S, PROFILE G, PROFILE T), onboard storage upto 512GB (SD card not included). The camera supports advanced Video Analytics (VA) including motion detection and alarm should be trigger on Tampering, Network disconnect, IP address conflict. CCTV should have password protection, privacy mask, IP address filtering, Metal Housing, Vandal-proof housing, IP67, IK10, DC 12V & PoE, Complete with Junction box for cable management. Operating Conditions within -20°C to 60°C or better. The MAC address of Camera/NVR must be registered in the name of OEM. Regulatory approvals include FCC, BIS/UL, CE. CCTV cameras must be BIS Registered Cyber Security Certified by STQC as per IoTSCS and meet the Essential Requirement (ER) issued by MeitY for security. The CCTV OEM should have its service/ support center in Rajasthan. |
| 55 | 2.8/3.6/6/8 mm lens with 50 Meter IR OR Higher |
| 56 | SITC of 32CH NVR for 2/5 MP cameras with minimum 4 SATA HDD Support with minimum 40 TB Capacity (minimum 10TB Capacity per slot - Hard Disk Not Included), minimum 1 HDMI output port, Video comression - H.265/H.264/JPEG, 1/1 Audio In/Out, Preview Capability - Upto 4K, Playback: 16-channel simultaneously. NVR should support minimum 320 Mbps throughput bandwidth (160 incoming bandwidth), ONVIF compliance (Profile S/G/T). Recording resolution up to 4K/8MP, minimum 2 USB Ports, minimum 1 Ethernet Ports (RJ-45) 10/100/1000Mbps. RAID 0/1/5/10 or better. The system shall operate in 0°C to +50°C or better with BIS, FCC, CE. The CCTV OEM should have its service/ support center in Rajasthan. |
| 57 | SITC of 3.5\\" 4TB internal HDD for cctv recording ,capable for 24x7 operation, hdd rpm capacity shoud be 7200 rpm or better, Buffer should be 512 MB as required of following size. |
| 58 | 10 TB |
| 59 | GST @ 18% |
| 60 | NON-BSR |
| 61 | AUDIO COMPONENTS |
| 62 | Supply, Installation, Testing & Commissioning of flying Dual 15\\" arrayble subwoofer with same footprints as Main Speakers for Arraying in the same frame, having a Freq. Range (-10 dB) of 30 Hz - 3100Hz & Freq. Response1 (-3 dB): 40 Hz - 2.5 kHz or better. It should have an axial Sensitivity of=>100dB (1W/1m) or more delivering a Max. Calculated SPL of >=137 dB.The loudspeaker should have a nominal impedence :4ohm and continuous Power Handling of 950W or more & a minimum of 25 M10 suspension points. Enclosure material should be birch plywood (Approved Makes: Bose, Nexo, Electro-Voice) |
| 63 | Supply of Line arrayble 12''/15\\", 2 Way, bi-ampable speaker having 1.75\\" or bigger HF compression driver. The speaker should have Freq. Response (-3 dB): 60 Hz - 15 kHz, Frequency range (-10dB) 50 Hz - 16 kHz, sensitivity (1W/1m) ≥ 98 dB SPL, delviering Max SPL ≥ 130dB with power handling ≤ 500W @ 8Ω. The speaker should have a nominal impedance of 8 ohm .The speaker should have a rotatable horn with coverage angle of Horizontal: 60°/40° & Vertical: 40°/60°.Speaker must have at least 20 suspension points. (Approved Makes: Bose, Nexo, Electro-Voice) |
| 64 | Supply of OEM Brackets for coupling Line arrayable Speaker cabinets (Approved Makes: Bose, Nexo, Electro-Voice) |
| 65 | Supply of OEM Brackets for coupling Line arrayable Subwoofers & Speaker cabinets (Approved Makes: Bose, Nexo, Electro-Voice) |
| 66 | Supply, Installation, Testing & Commissioning of stage monitor speaker with Frequency response (-3 dB) 82 Hz - 18 kHz¹Frequency range (-10 dB) 255 Hz - 20 kHz, Max. SPL 3 125 dB, Coverage angle (H x V) 90° x 60°, Amplifier rating 250 W, LF transducer 12 in. woofer - ferrite magnet HF transducer 1 in. titanium dome, neodymium magnet, ferro-fluid cooled Crossover frequency 2.1 kHz (Approved Makes: Bose, Nexo, Electro-Voice) |
| 67 | Supply, Installation, Testing & Commissioning of Single 5\\" Cabinet Speaker with frequency response of (-3db) 85Hz-20Khz and frequency response (-10db) 60Hz-20Khz or better with sensitivity of 90db , Max SPL 109db (110db peak), covering angle of Horizontal 90 degree and Vertical 90 degree, Power handling of 75W (300 W Peak) Continuous with nominal impdence of 8 ohm and minimum impedence of 6 ohm(Approved Makes: Bose, Nexo, Electro-Voice) |
| 68 | Supply, Installation, Testing & Commissioning of Dual channel power amplifier 2X1800 Watt with inbuilt DSP, Max Midband Output Power >=950W @ 8 Ω; >=1800W @ 4 Ω & >=3200W @ 2 Ω,Max Bridged Output Power>=6000W @ 4 ohms,,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:<0.05%, Max input level >= +21 dBu, input impedence:20 kΩ, Signal to Noise ratio > = 109 dB, Crosstalk < -80 dB with built in protection such as Audio Limiters,output delay per channel, with GEQ configurable per channel,PEQ per channel (Approved Makes: Bose, Nexo, Electro-Voice) |
| 69 | Supply, Installation, Testing & Commissioning of Dual channel power amplifier 2X1400 Watt with inbuilt DSP, Max Midband Output Power >=480W @ 8 Ω; >=950W @ 4 Ω & >=2800W @ 4 Ω,Max Bridged Output Power>=1700W @ 8 ohms,,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:<0.05%, Max input level >= +21 dBu, input impedence:20 kΩ, Signal to Noise ratio > = 105 dB, Crosstalk < -80 dB with built in protection such as Audio Limiters,output delay per channel, with GEQ configurable per channel,PEQ per channel (Approved Makes: Bose, Nexo, Electro-Voice) |
| 70 | Supply of 32 channel Compact Mixing System (24 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliarys (MON, FX, AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz, Crosstalk, 1 kHz Channel to Channel < -80 dB, THD at 1 kHz < 0.005%, CMRR MIC input 1 kHz > 80 dB, Dual stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay, Digital Audio Interface Channels : 4 In / 4 Out, AD/DA Conversion, Sampling Rate : 24-bit, 44.1 / 48 / 88.2 / 96 kHz (Approved Makes: Midas, Yamaha, Allen & Heath) |
| 71 | Supply of Freestanding Gooseneck Mic with base for podium having dual condensor back electret microphone element ,Selectable Omnidirectional/ Cardioid/ Supercardioid/ Hyper Cardioid polar pattern,LED status display and with programmable button for Push to Talk or Push to Mute functions having ,frequency response 50Hz-20kHz ,Height > 520 mm, sensitivity 5.5mV/Pa,clipping level >125dB SPL ,output impendence 200 ohm, Dynamic Range > 100 dB. (Approved Makes: Audio Technica, Senheiser, Electro-Voice) |
| 72 | Supply installation testing and commisioning of Dynamic Cardioid/supercardioid Vocal Microphone with Freq. Response : 80 Hz - 16,000 Hz, Sensitivity : 2.2 mV/pascal,Impedance: 200 ohms(Approved Makes: Audio Technica, Senheiser, Electro-Voice) |
| 73 | Supply installation testing and commisioning of condenser Cardioid/Supercardioid Instrumental Microphone with Freq. Response : 50 Hz - 16,000 Hz, Sensitivity : 6 mV/pascal, Impedance: 600 ohms (Approved Makes: Audio Technica, Senheiser, Electro-Voice) |
| 74 | Supply, Installation, Testing & Commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz (Approved Makes: Audio Technica, Senheiser, Electro-Voice) |
| 75 | Supply, Installation, Testing & Commissioning of Wireless Headworn Mic with Cardiod polar pattern for transmitter , Receiver & Transmitter frequency response 100Hz-18kHz or better,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 5.6 mV/Pa,modulation:+/-40kHz i(Approved Makes: Audio Technica, Senheiser, Electro-Voice) |
| 76 | Supply & Fixing of Floor Box to be concealed on Floor at Front and Back with XLR connectors |
| 77 | Supply & Fixing of XLR Connectors (for connecting speakers & mikes with amplifier) |
| 78 | Supply & Fixing of SPEAKON Connectors (for connecting speakers & mikes with amplifier). |
| 79 | Supply & Laying of 2 Core X 4 Sqmm Cable for Speakers with related conduits / fittings / termination,etc of make Deepcab / Belden / Crystal / ramer / Milestone Pro / Crestron / Extron. |
| 80 | VIDEO COMPONENTS |
| 81 | Supply, Installation Testing & Commissioning of 4x2 HDMI presentation switcher with matrix outputs. HDMI 2.0b, 4K@60Hz 4:4:4 8bit, HDR 10, HDCP 2.2. 4K to 1080p down scaling. SPDIF and 3.5mm output for dual HDMI OUT audio extraction and dual HDMI OUT ARC. RS232, IR and TCP/IP control. Smart EDID management (Approved Makes:-Milestonepro/Creston/Kramer / Extron) |
| 82 | Supply, Installation, Testing & Commissioning of 15-Pin HD, HDMI & Stereo Audio Passive Wall Plate with EDID PassThru - Passes EDID signals from source to display (Approved Makes:- Kramer / MilestonePro / Gigatronics / Crestron / Extron) |
| 83 | Supply, Installation, Testing & Commissioning of HDMI & Control twisted pair/ Hdbase T receiver/ Transmitter, 4K resolution support, Input: 1x RJ 45, Output: 1x HDMI, 1x Controls (RS232/IR) distance support of 70mtrs or more for reception of audio, video, control & power with feature of De-embededs audio. Should be compatible to the multiformat transmitter or Scaling Matrix Switcher (Approved makes : Kramer/Milestone Pro/Crestron) |
| 84 | Supply & Laying of 6 feet HDMI male to male cable 4K support (Approved Makes:- Kramer / Milestone Pro / Crestron / Extron) |
| 85 | SITC of Digital Podium; Integrated Central Teaching Platform, (a) Main Cabinet System - Metallic structure customized to house hardware/software with powder coated fitted with cooling fans & caster wheels with brakes & provision to mount Smart Orator with beam splitting mirror, Podium with Std Dimension, External connectivity options: 2 x USB, 2 x XLR on Top and at right bottom – HDMI in/ Out, VGA In/ Out, Audio In/ Out, Gigabit LAN, Power socket with On/Off switch, Drawer for document camera with dimensions – Depth 560mm, width 440mm, height 150mm, Metallic top tray for placing documents, laptop etc. dimensions 630mm x 655mm, Drawer for keyboard and mouse, Security- All drawers, Sliding Trays, and Doors should be lockable, Minimum 8 x 5 Amp modular universal metallic spike buster for devices connectivity with miniature circuit breaker and central power control, Provision to fix Logo at the front side with the flexibility to change the logo, Size – 560mm x 410mm, Provision of 19\\" Rack inside podium to fit in international standard equipment with minimum adjustable shelves, Provision for upgrades to cater for future changes in technology, Access doors for servicing both from front and back sides of the podium, Wire managers on for flexibility of managing additional wires/wiring. (b) Integrated multimedia controller on top panel with keypad to control Projector Screen, audio system volume control, switch on/off the PC & Projector, IR device control, RS232, LAN connector, USB etc. Switching among PC, Laptop and Document Camera with auto splitting between podium monitor & projection system, switching DVD & TV etc. Minimum three full HD (HDMI) input devices and minimum support for two full HD (HDMI) output for simultaneous display. (c) Interactive Display - Display size 21.5” Interactive Monitor with up to 60-degree adjustable motorized tilt, Resolution 1920 x 1080 pixel. 250 Cdm2, 10 Touch Point, HDMI/ DVI/VGA & USB Ports. (d) Integrated Mixer Amplifier - 120W, Rated Output 120 Watt, Frequency Response - 60Hz to 20 kHz (+1/-3 dB at -10dB refracted output) Output - 8 ohm - 100V, Sensitivity - 1mv, SNR- 63db, Phantom Power for Gooseneck - Inbuilt selectable phantom power for all microphones input, Input Source - 4 Mic/ Line input & 1 BGM.(e) Wireless Head-worn and Handheld Microphones (Dual Channel 02 Units - Should be able the clearest channel. available with the touch of one button, Infrared channel transfer from the receiver to the transmitter for easy and error-free setup, 14-hour battery life from two AA alkaline batteries, Metal transmitters with backlit LCD display and battery gauge, Receiver Type: Synthesized PLL, Number of channels: 32, Frequency response: 80 Hz – 18 kHz ± 2 dB, Distortion: <1%, Signal-to-Noise Ratio: > 100 dB A-Weighted, Dynamic Range: > 95 dB. (f) Gooseneck Microphone - Should have RFI shielding, Polar pattern: Cardioid, Frequency response: 70-15kHz, Element type: Condenser, Sensitivity: 4.5mV/pascal, Dynamic range: 102 dB, Power requirement: 9-52 V (DC), Output Impedance: 200 Ohms, Overall length: 18-inch. Gooseneck Microphone with XLR output.It should be Phantom powered so that there is no requirement of batteries thereby eliminating consumable cost.The gooseneck length should be atleast 21.5cm with ON/OFF switch and with LED light indicating ON/OFF status.The gooseneck microphone shall be permanently polarised condensor,highly directional featuring hypercardioid /lobar directivity (g) Audio System - 4 x 30-Watt Wall Mount Speakers, 1Rated power: 30W, Selectable 8-ohm, 70 V and 100 V inputs, Power tapping: 30/15/7.5/3.75 W, Sound pressure level: 105/90 dB, Effective frequency range: 100Hz - 19KHz, Rated input voltage: 15.5/70/100 V, Rated Impedance: 8/163/333 ohm, Transducers: 5\\" woofer & 0.51\\" dome tweeter, Water and dust protected IP65. (h) Power Unit - 1KVA Line Interactive UPS with minimum 10-15-minute power back-up. Audio approved makes :- Bosch / Apart / Bose, Digital Podium Approved Makes: Peoplelink / Globus / Techpoduim |
| 86 | Supply, Installation, Testing & Comissioning of Accessories; Power Cable, HDMI Cable, Casing/ Conduits,Wiring for audio all other necessary accessories required to set-up the hardware as per site requirement |
| 87 | Supply, Installation, Testing and Commissioning of Projector with 5300 ISO lumens or more capacity, 3 LCD Display technology, with native resolution 1920*1200 WUXGA or more with solid state laser illumination, estimated life 20,000 hrs or more (normal mode), motoeized zoom & focus, HDMI*2 & HDbase T*1 , Computer & RCA connector *1 Video input and 3.5 mm stereo input and HDMIout*1, monitor &audio output control via RS-232C, RJ45port*1, wired remote controlin/out, 3.5 mm mono connector*1, HD BaseT*1, supplied with IR remote control complete with ceiling mount structure. Approved Makes:- Christie/Barco/Digital Projection |
| 88 | Supply & testing and commissioning of Ceiling Mount Kit 2FT Ceiling-mount capability • Extremely flexible design allow to fit almost all popular projectors • Quick release universal mount for Projector • 360 degrees Rotate for Projector • +/- 20 degrees Tilt and Roll for Projector • Adjustable-height from 11.42” to 32” (290mm-810mm) • Cable-routing channel for a clean look • Cable management including fixing with fastner etc as required complete in all respect |
| 89 | Supply, Installation, Testing & Commissionig of Cyclorama & its frame arrangement of size 6 Mtr x 4 Mtr undergone through various chemical treatmentto keep them rust free and duly powder coated in black matt texture finish with Below Specifications:• Heavy duty Cyclorama 6 Mtr Length duly epoxy polyester powder coated inblack matt texture finish to use as straight cyclorama track• MS fabricated Grid/wall mount bracket constructed of C track of dimension 40X50X40mm duly powder coated to hold the Cyclorama track,• MS fabricated Tie down railing cut length 3 mtr duly powder coated to keep the cyclorama in drumtight arrangement,• trolley placed uniformly at specific interval of 200mm/250mm throughout the track to hold the cyclorama screen• MS powder coated Leading edge pipe of 25NB, 33.4MM OD, 2mm thickness to keep the cycloramain drum tight arrangement.• All the MS materials under gone through 7 tank process with various chemical treatment to keepthem rust free with and duly epoxy polyester powder coated in black matt texture finish.Approved Makes: Nexgens/Chuvet/Canara |
| 90 | STAGE LIGHT & CURTAIN |
| 91 | Supply, Installation, Testing & Comissioning of 200W LED PARCAN High Quality LED Parcan Light complete with, Lamp source : COB LED Color Temperature CW/WW Colour CRI & TLCI Values above 90 COB LED source from DMX 512 dimming with 3 channel control Beam Angle of 60˚ Total Power Consumption of 230W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable, Power Rating - IP 20, Control Manual, Power Supply - 100-240 V AC, 50/60nHz, 5 Pin XLR for Channels- 2 channel DMX 512 , Black powder coated body. Approved Makes: Nexgens/Chuvet/Canara |
| 92 | SITC of 54x3W LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. Lamp - 54 x 3W 3200K/6000K LED, Power consumption – 150W, Power supply - 230/240V AC, Power cable - 3 core 1.5 sq. mm. copper PVC insulated, Channels - 1 Channel DMX-512, Beam angle - 25° (15°, 45° optional) Function - Manual dimming, DmX modes of operation. The work shall be completed in all respect as per sound engineering practice & Direction of EIC. Make : Nexgens/Chuvet/Canara |
| 93 | SITC of 54x3W LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. Lamp - 54 x 3W RGBW LED, Power consumption – 150W, Power supply - 230/240V AC, Power cable - 3 core 1.5 sq. mm. copper PVC insulated, Channels - 1 Channel DMX-512, Beam angle - 25° (15°, 45° optional) Function - Manual dimming, DmX modes of operation. The work shall be completed in all respect as per sound engineering practice & Direction of EIC. Make : Nexgens/Chuvet/Canara |
| 94 | Supply, Installation, Testing & Comissioning of 200W LED Profile light 19° ELL-PR-200 with below specifications :- Lamp Power : LED, 200W Power Supply : AC 110-230V, 50Hz Focus : Manual Focus , Beam Angle : 19° , Dimmer : 0-100% linearly adjustable manualy focusable, high quality optical system,glass reflector. DMX Control protocol: DMX 512. , CRI : >90 , Dimming : 100 - 0% dimming • Control system : DMX,Auto run and master/slave, Working temp : 30-40 degree celcius,No noise fan of pccooler, Protection Rating : IP20, Approved Makes: Nexgens/Chuvet/Canara |
| 95 | SITC of 2x2 blinder matrix fixture with advanced COB LEDtechnology light with below specifications:-• Frequency : 50-60Hz• Power Consumption: 400W• LEDs Qty : 4 pieces• Light Color: Single color warm white (3200K)• Lifetime: Over 50,000 hours• Dimmer: 0~100% linearly adjustable• Beam Angle: 30 degree• Control mode: DMX512,Master/Slave, Auto Run, Sound active.• IP Grade: IP20• Net Weight: 5kgs The work shall be completed in all respect as per sound engineering practice & Direction of EIC.Make :Nexgens/Chuvet/Canara |
| 96 | Supply, Installation, Testing & Commissioning of Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications.• Lock - MS threaded Galvanized lock key, • Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self-weight - 0.54Kg, in respect to approved makes as per Engineer InchargeMake : Canara/Chuvet/Nexgens |
| 97 | Supply, Installation, Testing & Commissioning of Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope, 2mm or 3mm Thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the \\"C\\" clamp is not locked properly. SWL 150Kgs in respect to approved makes as per Engineer InchargeMake : Canara/Chuvet/Nexgens |
| 98 | Supply, Installation, Testing & Commissioning of 79mm Round Identification name plate duly epoxy polyester powder coated in matt texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 99 | SITC of Light bar for Lights of 15 mtr. length, made using40NB undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint. Make : Nexgens/ Chuvet/ Canara |
| 100 | SITC of Fixed Light bar for Front of Bar of approx 16 mtr. length , made using 40NB undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint. Make : Nexgens/ Chuvet/ Canara |
| 101 | SITC of Grand drape fabricated MS Curtain Rail heavy duty Type track system of 23 mtr. in length ., centre parting with overlap of 0.6 mtr provided with Heavy duty fabricated curtain track complete with mounting brackets. Electromechanical drive unit with 1 HP Motor, GI wire ropes of 4 mm in diameter constructed with 7 bundles of 7 strands with fibre core at centre, Curtain holding trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the curtain track. System to be complete with necessary Divertor and tension pulley. with Fire retardant velvette fabric 200% gathering for Grand drape with approved colour duly stitched and with eyelets. Size: As per actual Fabric Make : Reliance /Nexgen/Innovative/Raymonds Make : Nexgens/ Chuvet/ Canara |
| 102 | Supply, Installation, Testing & Commissioning of Main Valance Bar, length 21 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 103 | Supply, Installation, Testing & Commissioning of Frill Bar, length 15 Mtrs made using 40NB, 48mm OD construction arrangement 2mm Thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 104 | SITC of Fixed Utility Bar for stage of approx 12 mtr. length, made using 40NB undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint. Make : Chuvet/Nexgens/Canara |
| 105 | Supply, Installation, Testing & Commissioning of MS Side Lighting Ladder of suitable length and Width (Min 2400 mm Height & 600 mm Width)• Made using 40NB, 48MM OD, 2mm thickness MS Pipe • Suitable suspender and clamps made with MS Angle of size 40x40x5 mm thick or higher size• All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 106 | Supply, Installation, Testing & Commissioning of MS Fabricated 4 way 10A, 250V A.C, IEC, Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures with Pipe clamp arrangement for fixing on pipe grid or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 107 | Supply, Installation, Testing & Commissioning of MS Fabricated 2 way 10A, 250V A.C, IEC, Junction box made up of 22SWG CRCA with rocker switch to power up splitter and console with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, duly black epoxy polyester powder coated texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 108 | Supply, Installation, Testing & Commissioning of MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 109 | Supply, Installation, Testing & Commissioning of MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 110 | Supply, Installation, Testing & Commissioning of MS Fabricated 5 pin DMX Signal Loop Junction box fitted with 5 pin DMX male/female socket, junction box made up of 22SWG CRCA, with Pipe clamp on pipe grid arrangement for fixing or Raul plug arrangement for wall/floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 111 | Supply, Installation, Testing & Commissioning of Well designed 24 out Direct Lighting Distribution panel made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp, 50A TPN incomer, SP Mcb's and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 112 | Supply, Installation, Testing & Commissioning of Auxiliary marshalling box for power and signal cable termination in grid level and in Motorised Light bar• CE Marked FC/PG cable entry gland required Nos as per cable entry.• MS channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • Grey terminal connector with each line having P, N, E Indication for each line incoming and out going cable connectors.• Box door must be made with Hingeable door with screw lock. • Made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 113 | Supply, Installation, Testing & Commissioning of Motor Cable Termination box for power cable termination at grid level.• CE certified FC/PG 11 & 13.5 cable entry gland required Nos as per cable entry.• MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. • Grey terminal connector with each line having L1, L2, L3, E, 6 , 2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection)• Box door must be made with Hingeable door with screw lock. • Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing• MS Boxe made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 114 | Supply, Installation, Testing & Commissioning of MS Fabricated Combined 1 Way Motor Control Center panel cum Remote Control panel for Light bars & Curtain system made up of 14SWG / 16SWG / 18 SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt seaman’s grey texture finish with following specifications.• 16A TP or TPN Incomer. • Main Contactor of 9A 240V 4 pole contactor with 04 -06A Over Load relay for safety • 24V 4 pole Low Voltage Contactors • 240V / 24 V Step-down transformer for Low voltage Contactors • All the FRLS PVC ISI Marking cables inside the panel routed through PVC gray color cable trough. • Red Color Mushroom head push button for emergency stop • Yellow color reset push button • Master sector actuator switch with 3 Position UP, DOWN & OFF • Spring return selector switch for each hoist with UP & DOWN indication. • All the cables inside the panel routed through PVC gray color cable trough. • Panel Including wiring with proper earthing in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 115 | SITC of Rack mount photo isolator DMX splitter unit 1 DMX input and 8 isolated output with following specifications: Power Supply: 90-240V AC, 45-63Hz. Control: DMX 512 protocol. Control Signal input: 5 pin XLR female. Size: 482 x 44 x 128mm. Weight: 2Kg Make : Nexgens/Chuvet/Canara |
| 116 | SITC of Lighting console of 2048 shall support the processing of up to 240 total DMX512 outputs by use of potentiometers for submasters, playbacks and effects as well as buttons to activate cues. The console shall control channels for the purpose of controlling dimmers for incandescent loads. The console shall support up to 10 automated luminaires .Make : Chuvet/Nexgens/Canara |
| 117 | Supply, Installation, Testing & Commissioning of 5 pin XLR male / female connectors of made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination in respect to approved makes as per Engineer Incharge Make : Canara/Chuvet/Nexgens |
| 118 | Supply, Installation, Testing & Commissioning of 5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination in respect to approved makes as per Engineer Incharge . Make : Canara/Chuvet/Nexgens |
| 119 | Supply, Installation, Testing & Commissioning of Main Valance Fabric : Fire retardant velvette fabric 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 200 GSM, duly stitched along with eyelets. Size : L 21 x H 1.3 MTR in respect to approved makes Mayur, Omphile, Nexgen, Reliance, Innovative |
| 120 | Supply, Installation, Testing & Commissioning of Main Curtain Fabric : Fire retardant velvette fabric with lining 100% (2 times of the finished dimension) gathering as per the approved patern and colour, not less than 200 GSM, duly stitched along with eyelets. Size : L 24 x H 13 MTR in respect to approved makes Mayur, Omphile, Nexgen, Reliance, Innovative |
| 121 | Supply, Installation, Testing & Commissioning of Frill Fabric : Fire retardant cotton fabric 50% gathering as per the approved patern and colour, not less than 200 GSM, duly stitched along with eyelets. Size : L 15 x H 1.3 MTR in respect to approved makes Mayur, Omphile, Nexgen, Reliance, Innovative |
| 122 | Supply, Installation, Testing & Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 7cx1.5 sq mm in respect to approved makes Walna, SBEE, Polycab, KEI, Havells, RR Cable |
| 123 | Supply, Installation, Testing & Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 4cx 4 sq mm. in respect to approved makes Walna, SBEE, Polycab, KEI, Havells, RR Cable |
| 124 | Supply, Installation, Testing & Commissioning of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm. in respect to approved makes Walna, SBEE, Polycab, KEI, Havells, RR Cable |
| 125 | Supply, Installation, Testing & Commissioning of FR Grade DMX Signal 4 core + Ground shielding Cable with CE mark for the Signal network in respect to approved makes Falcon, Beldon, Polycab, Deepcab, |
| 126 | Supply, Installation, Testing & Commissioning of MS perforated tray of Size 40 x 75 x 40mm & 1.6 mm Thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement in respect to approved makes Ricco, Plico, Canara, Legrand, Slotco |
| 127 | Supply, Installation, Testing & Commissioning of Internal earthing copper bare conductor of size 14 SWG for power network related work |
| 128 | Supply, Installation, Testing & Commissioning of Installation hardware’s such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender