Tender For Supply, Installation, Testing And Commissioning Of Different Pumping Unit For Lift Irrigation Schemes In Different Areas Of District Srinagar -- Est. Rs. 60.00 Lacs
Tender Value
60 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
2 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing And Commissioning Of Different Pumping Unit For Lift Irrigation Schemes In Different Areas Of District Srinagar -- Est. Rs. 60.00 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | PART A:Design, Manufacture, Supply, Installation, Testing and Commissioning Of 10 Cusec Capacity Horizontal Pumping Unit With 15 Meter Dynamic Head and allied Electrical & mechanical equipment For Lift Irrigation Scheme Bakshipora Kernabal of MISD Headquarter.Manufacture, Supply, Installation, testing and commissioning of 10 Cusec Horizontal Split Casing pumping unit as per following specification for Lift Irrigation Scheme Bakshipora Kernabal.As per specifications mentioned in Annexure A, S. No. 01 |
| 2 | Supply, installation, testing and commissioning of CI NRV of 300 mm of pressure ration PN 1.0 as per IS 5312(Part 1):2004 with latest amendments and flange connections as per IS 1538. (Make: Kirloskar/ VAG/as per EOI/ Substantially equivalent) including fabrication of bypass arrangement for 300 mm dia NRV as under: Creating holes of 50 mm using gas cutter. Providing and fitting of 50 mm dia steel pipe heavy class of required length along with 2 No elbows. Providing and fitting of 01 No SS Ball valve 50 mm of reputed make.The job also includes providing, welding & fitting of 300mm ND Flanges of matching Pitch and thickness with NRV. The job also includes proving, welding and fitting of 300 mm ND flange of matching pitch and thickness to pump discharge. |
| 3 | Providing fitting, installation and testing of New priming pump set of size 65mm x 50 mm to be connected to 02 Number horizontal type pumping equipment at site. The priming pump set shall be of reputed ISI mark. The priming pump shall be Monoblock type mounted on channel Iron common base frame. The capacity of the pumping equipment shall be as per requirement at site and the prime mover rating shall be of 5 HP. The speed of the pumping equipment shall be 2880 RPM (Max.). The priming pump shall be installed at foundation block which shall be laid in proper grading all the material required for the foundation block shall be arranged at site. As per specifications mentioned in Annexure A, S. No. 03 |
| 4 | Fabrication, providing, installation, testing & commissioning of Mild steel pipe of 300 mm nominal dia. with 6 mm wall thickness to be laid as suction/delivery pipe at. The pipes shall be end to end welded to each other in two circumferential runs to provide a complete leakproof arrangement. The offsets in the scope of laying the pipe are covered in the job. The job includes proper laying of pipe as per:i. Nominal dia. = 300mmii. Wall thickness = 6 mmiii. Quality of Mild steel to be used for manufacture of pipes = As per BIS-226 Or BIS - 2026iv. Type of welding = ERWv. Pipe to be manufactured as per BIS-3589-1981vi. Maximum circumferential joints in each pipe length = 2-3 |
| 5 | Fabrication, providing & installation of 300mm dia. Mild steel long Bend to be welded to rising main where ever required. The bend shall be fabricated out of 6 mm thick M.S pipe. i. Nominal dia. = 300mmii. Wall thickness = 6 mmiii. Quality of Mild steel to be used for manufacture of pipes = As per BIS-226 Or BIS - 2026iv. Type of welding = ERWv. Pipe to be manufactured as per BIS-3589-1981vi. Maximum circumferential joints in each pipe length = 2-3 |
| 6 | Providing and welding of steel plate (MS) flanges of nominal pressure rating 1.0MPa as per IS 6392 with 300 mm ND for installation of the above suction /delivery pipe.i. Thickness of the flange ... 12mm ii. Inner dia. of the flange... 300mmiii. Outer dia. of the flange...450mm iv. Number of holes on flange... 10-12 Nos.v. Dia. of holes on flange... 20mm.The job includes all fitting material like nuts/bolts & RI Cloth washer etc at site. |
| 7 | Manufacture, providing, fitting, installation and testing of 300mm Dia. Mild steel foot valve. The foot valve shall have to be fabricated out of 6mm thick Mild steel plate. The flanges fitted with the foot valve shall be of 12mm thickness.The thickness of weight plate shall be 20 mm and shall be fitted with heavy duty hinge having sufficient foot valve seat dully turned on lathe and fitted with leather washer.The job also includes fabrication, providing and fitting of M.S strainer made out of 14mm sq. bars. The height of the strainer shall be 300mm other specifications of the foot valve are given here under:Material = Mild steel plate Thickness of body = 6mm Flange thickness = 12 mm Internal diameter of foot valve = 350mmOuter dia. of flange = 550mm Thickness of weight plate = 20mmThe foot valve shall be painted with one coat of steel primer The job includes providing and fitting of nuts and bolts and RI cloth washers. |
| 8 | Providing and installation of medium duty chain pulley block with lift height of 06 mtrs (Make: Indef) 5 Ton Capacity |
| 9 | Providing and fitting of Panel board of size 6’x4’ out of MS angle iron frame 65x65x6mm thick. The panel board shall have suitable legs 3’ which shall have to be grouted with the floor of station. The board shall be fitted 19 mm plywood and face covered with 4mm thick ACC sheets |
| 10 | ELECTRICAL EQUIPMENTProviding, fitting, installation, testing and commissioning of 150 KVA voltage controller/stabilizer As per specifications mentioned in Annexure A, S. No. 10 |
| 11 | Providing and fitting of 95 sqmm XLPE insulated, 1100V single core unmoured industrial copper cable as under (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycom/Substantially equivalent). The cable is required to be laid in Six s lines from motor to Starter and starter to Voltage stabilizer and stabilizer to MCCB along with required size copper thimbles. |
| 12 | Providing, Installation Testing and Commissioning at site 150 HP capacity Auto Transformer Starter. The starter shall comprise of the following equipment and accessories.As per specifications mentioned in Annexure A, S. No. 12 |
| 13 | Providing of shock proof rubber mats of size 1.00 Mtr. X 2.00 Mtr. (approximate) having 18mm thickness of standard quantity. |
| 14 | Design, manufacturing, providing, fitting, testing & commissioning of 400 Ampere LT Distribution Panel Board. Free Standing, Floor mounted compartmentalized design housing for all the equipment fabricated out of 2 mm thick sheet having abdicated size, shall be fabricated with a hinged door at the front frame fabricated out of 75mm ISMC welded / bolted to the housing at the bottom. The housing shall have to be provided with necessary cut out spares for switch gears/ meters / selectors incoming and outgoing connections and have air vents and shall have to be painted with two coats of red oxide primer spraying two coats of synthetic enamel of grey /suitable colour shade from inside as well as outside after providing and applying of putty and smoothing of the surface.As per specifications mentioned in Annexure A, S. No. 14 |
| 15 | CIVIL WORKS:CONSTRUCTION OF SUMP AND C.G.I PUMP HOUSE FOR LIFT IRRIGATION SCHEME KERNABAL BAKSHIPORAEarthwork in bulk excavation by manualmeans over areas (exceeding 30cm in depth ,1.5m in width as well as 10sqm on plan)including disposal of excavated earth & lead upto 1.5m, disposed earth to be neatly levelled dressed.(All kinds of soil) |
| 16 | Dumping of boulders excl. Cost of stone (in horizontal) i.e., on level. |
| 17 | Providing & Laying in position cement concrete of specified grade excluding cost of centering & shuttering all works upto plinth level. 1:4:8 (1cement : 4 coarse sand: 8 graded stone agg. 40mm nominal size) |
| 18 | Providing & Laying in position cement concrete of specified grade excluding cost of centering & shuttering all works upto plinth level. 1:2:4 (1cement :2 coarse sand : 4 graded stone agg. 20 mm nominal size) |
| 19 | Supply of stone soling |
| 20 | Centering & Shuttering including strutting, propping etc. & removal of form work for Walls (any thickness) including attachedpilasters , buttresses, plinth & string courses etc |
| 21 | Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15, landings, balconies, shelves, chajjas etc including curing but excluding cost of centering and shuttering, and reinforcement with 1:1.5:3 (1cement :1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) |
| 22 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 23 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 24 | Cement concrete flooring 1:2:4 ( 1cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat ofneat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mmnominal size stone aggregate crushed. |
| 25 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 26 | Carriage of material by Mech. Transport from source to site of work:Stone soling with the a lead of 15 Km from Athwajan |
| 27 | 40mm aggregate with the lead of 15 Km from Athwajan |
| 28 | 20 mm aggregate with the lead of 15 km from Athwajan |
| 29 | Sand with the lead of 05 km from local source |
| 30 | Cement for the lead of 08 Km from Div store |
| 31 | Part B:Design, Manufacture, Supply, Installation, testing and commissioning of 3 cusec Horizontal pumping unit along with allied electrical and mechanical Works at Dewatering Scheme Khushipora.Design, Manufacture, Supply, Installation, testing and commissioning of 03 Cusec Horizontal Mixed Flow End suction pumping unit as per following specification for Lift Dewatering Scheme Khushipora as per IS 6595(Part1):2002As per specifications mentioned in Annexure B, S. No. 15 |
| 32 | Dismantling of old pumping unit from the base frame and then removing baseframe from the foundation using manual/mechanical methods and then shifting of the old pump to store Gogjibagh. The job further includes excavation of the concrete base till 1 meter depth of the size 7’x 4’and then laying of new RCC foundation in 1:2: 4 20 mm nominal size for the new pumping unit so that it is completely aligned. The job includes all tools tackles material etc required for the execution of the job. |
| 33 | Providing and fitting of 200mm dia foot valve to 200mm dia MS suction pipe. The foot valve shall be fabricated out of 8mm thick MS plate having 08 No of holes of M-16 size and the flap shall be fabricated out of 12mm thick MS plate. The foot valve shall be leak proof with perfect shape and smooth finish. The flap shall be fitted with leather washer and the flap seat of the foot valve shall also be fitted with leather washer. The intake / inlet of the foot valve shall be provided with strainer fabricated out of 10mm MS rods. |
| 34 | Design, manufacturing, providing, fitting, testing & commissioning of 200 Ampere LT Distribution Panel Board. Free Standing, Floor mounted compartmentalized design housing for all the equipment fabricated out of 2mm thick sheet having abdicated size, shall be fabricated with a hinged door at the front frame fabricated out of 75mm ISMC welded / bolted to the housing at the bottom having depth of minimum 18 inches. The housing shall have to be provided with necessary cut out spares for switch gears/ meters / selectors incoming and outgoing connections and have air vents and shall have to be painted with two coats of red oxide primer spraying two coats of synthetic enamel of grey /suitable colour shade from inside as well as outside after providing and applying of putty and smoothing of the surface.As per specifications mentioned in Annexure B, S. No. 18 |
| 35 | Providing, fitting, testing and commissioning of ML3 FASD Starters (For Pumping Unit-1 & pumping Unit -2) having following specifications: Type/ Rating: ML-3.Make: L&TRelay Range: 28-42 A.Motor Rating: AC3-Phase, 415 + 15% V, 50 + 3% HZ.Relay: ML 2/3Conformance to Standards IS/IEC 60947-4-1, IEC 60947-4-1Degree of protection: IP 54The Starter shall have all three modes of operation like Auto, Manual and Bypass and the starter shall have protections like single phase preventer, phase imbalance, reverse protection, overload etc. The starter is to be provided with Under/Over Voltage Protection relay/system with Adjustable Over and Under voltage trip level of L&T/Minilec/GIC Make along with wiring as per site requirement. The job is inclusive of providing and Fitting of the starter as per site requirement along with nuts, bolts & washers, which further includes minor wiring i.e. connecting of main incoming and outgoing connections with copper wire duly crimped with copper thimbles as per site requirement and finally testing of the starter on full load at site. |
| 36 | PART C: Manufacture, Supply, Installation, testing and commissioning of Horizontal pumping unit along with foot valve at Lift Irrigation Scheme Rawalpora Astanpora.Manufacture, Supply, Installation, testing and commissioning of 03 Cusec Horizontal Split casing/end Suction pumping unit as per following specification for Lift Irrigation Scheme Rawalpora Astanpora As per specifications mentioned in Annexure C, S. No. 20 |
| 37 | Providing and fitting of 200mm dia foot valve to 200mm dia MS suction pipe. The foot valve shall be fabricated out of 8mm thick MS plate having 08 No of holes of M-16 size and the flap shall be fabricated out of 12mm thick MS plate. The foot valve shall be leak proof with perfect shape and smooth finish. The flap shall be fitted with leather washer and the flap seat of the foot valve shall also be fitted with leather washer. The intake / inlet of the foot valve shall be provided with strainer fabricated out of 10mm MS rods. |
| 38 | Dismantling of old pumping unit from the base frame and then removing baseframe from the foundation using manual/mechanical methods and then shifting of the old pump to store Gogjibagh. The job further includes excavation of the concrete base till 1 meter depth of the size 7’x 4’and then laying of new RCC foundation in 1:2: 4 for the new pumping unit so that it is completely aligned. The job includes all tools tackles material etc required for the execution of the job. |
| 39 | PART D: Providing and fitting of 630 Amp ACB at Lift Irrigation Scheme Batpora New of MISD Ganderbal.Replacement of damaged 630 Amp ACB by way of:a) Providing, installation, testing and commissioning of 630 Amp. ACB with following specifications breaking capacity at AC 415volts 50 KVAb) Model = CN - CS 630 Cc) Current rating = 630 Amp.d) No. of poles = 3 polese) Braking Capacity = 50 KAf) The ACB shall be fitted with thermal and magnetic setting confirming to IEC 60947-11/18: 13947-11g) Make: Havel's, L&T, D-sine or its equivalentThe job also include P/F of 200 Amp. Rating Cu-thimbles at all the terminals (12 Nos).The job also include shifting of the damaged item to divisional store, which include transportation, loading and unloading Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender