Tender For Provision Of Additional Electrical Arrangements And Smoke Detectors To The Kamarajar Illam-Heritage Building At T.Nagar,Chennai.
Tender Value
24.92 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
12 days left
EMD
24500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Additional Electrical Arrangements And Smoke Detectors To The Kamarajar Illam-Heritage Building At T.Nagar,Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box 5A FT switch in flush with wall covered with hylem sheet of 3mm thick with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coil |
| 2 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accesories inflush with wall with hylem sheet of 3mm thickwith TW switch box 5A FT switch in flush with wall covered with 6A one way switch and making good of the concealed portion with suitable colour for PVC Concealed Light ( 6 points / Coil)(for rooms like bath, toilet, pump room etc.) |
| 3 | Supply and Fixing of 4 Feet LED Fitting with 18W LED Tube Light (Higher end) complete with TW round blocks on Wall or Ceiling with PVC unsheathed FRLS copper leads from terminals to the Fittings. |
| 4 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb. |
| 5 | Supply and Fixing of 40W suspended mounting Round type Model.No. SP682P 40W - 6500 PSU OD DIA600H55 FGR WH PA017 IP 20 rating on Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/equivalent) |
| 6 | Supply and Fixing of decorative 5 W x 1 light crystal shade Wall lamp with antique copper finish type Light fitting Jaguar model No. DCW ACR-WLC9602XK9 on Wall with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/equvalent) |
| 7 | Supply and Fixing of 45W LED aesthetically designed Gate light Fitting with IP65 protection model No. Havells RUBYNXTPT45W LED 757 PSY MTOPC on Wall with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/equivalent) |
| 8 | Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting) |
| 9 | Supply and Fixing of Chandelier Light , 6light white pitcher shades with white finish ceileing light, Model No.DCH -WTC - MX150300086A on Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/Jaguar/equivalent) |
| 10 | Supply and Fixing of Twin type 30 W LED Kite make Magudam Midi [Dimension : Ø358 x 670mm] 30W LED, Integral CCT: 3000K ,PF Colour: RAL 9004 Black & Gold, Bishop (Ø88.9) Dim: 3000,Pole Bracket: Snaky Mini,Pole Bracket Arm: Double Arm and concreting with construction of masonary pedestal with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/equivalent) |
| 11 | Supply and Fixing of 30 W LED Kite make Magudam Midi [Dimension : Ø358 x 670mm] 30W ,LED, Integral, CCT: 3000K, PF Colour: RAL 9004 ,Black & Gold ,Bishop (Ø88.9), Dim: 3000 ,Pole Bracket: Snaky Mini, Pole Bracket Arm: Single Arm and concreting with construction of masonary pedestal with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/equivalent) |
| 12 | Supply and fixing of exterior-rated Warm White architectural floor/wall/Pole mounted, IP66, round flood light complete with antiglare snoot. The power consumption should be not more than 24 watts, minimum system lumen delivered shall be 1400 lumens ±10%, 30°X 60° beam angle ±10%, CCT-2200K-3000K ±150K. LED from CREE/NICHIA/LUMILED/OSRAM/ Equivalent). The housing material should be die-cast aluminum with Electrostatically applied polyester powder coating, The luminaire is to be installed with anti-aging and anti-UV high optical efficiency PMMA lenses and a clear tempered glass cover. Bracket shall have a locking mechanism to fix and secure the required tilting angle, ±90°. It should have CRI>80, and SDCM≤4. The driver should be integrated AC with PF>0.9 & and THD<20%. Leader cables, and IP68 connectors are included, minimum IK06. The operating temperature should be of -40°C to 50°C range and the storage temperature shall be -40°C to 70°C. the weight of luminaire shall be min 1.8kg. The lifetime of the luminaire (L70 @ Ta-35deg C) should be at least 50,000 burning hours. Luminaire should have corrosion resistance with self-declaration of ASTM B117 for 500 hours of salt spray test. Photometric data shall be passed on test results from an independent testing lab. All mounting accessories shall be stainless steel (Minimum -316) for all lighting fixtures. All hardwired connections to LED fixture shall be reverse-polarity protected and shall provide high-voltage protection in the event that connections are reversed or shorted during installation. The luminaire should be BIS-certified. Philips 24W LED Exterior floor surface spike light Model No.BVP371 12 LED 22K 220V 30*60 24W HE IN (Philips/Havells/equivalent) |
| 13 | Supply and fixingof exterior-rated Warm White architectural floor/wall/Pole mounted, IP66, round flood light complete with antiglare snoot. The power consumption should be not more than 24 watts, minimum system lumen delivered shall be 1400 lumens ±10%, 10° beam angle ±10%, CCT-2200K-3000K ±150K. LED from CREE/NICHIA/LUMILED/OSRAM / Equivalent. The housing material should be die-cast aluminum with Electrostatically applied polyester powder coating, The luminaire is to be installed with anti-aging and anti-UV high optical efficiency PMMA lenses and a clear tempered glass cover. Bracket shall have a locking mechanism to fix and secure the required tilting angle, ±90°. It should have CRI>80, and SDCM≤4. The driver should be integrated AC with PF>0.9 & and THD<20%. Leader cables and IP68 connectors are included, minimum IK06. The operating temperature should be of -40°C to 50°C range and the storage temperature shall be -40°C to 70°C. the weight of luminaire shall be min 1.8kg. The lifetime of the luminaire (L70 @ Ta-35deg C) should be at least 50,000 burning hours. Luminaire should have corrosion resistance with self-declaration of ASTM B117 for 500 hours of salt spray test. Photometric data shall be passed on test results from an independent testing lab. All mounting accessories shall be stainless steel (Minimum -316) for all lighting fixtures. All hardwired connections to LED fixture shall be reverse-polarity protected and shall provide high-voltage protection in the event that connections are reversed or shorted during installation. The luminaire should be BIS-certified.Philips 24W Exterior façade surface light Model No.BVP371 12 LED 22K 220V 10 24W HE IN (Philips/Havells/equivalent) |
| 14 | Supply of fixing Outdoor Façade Lighting Jumper cable in 2mtr length (Z x 399) for data communication in 4 pin (10 Nos.) with IP67 Connector with necessary connections. (Philips/Havells/equivalent) |
| 15 | Supply and fixing of Aluminium Profile 17mm profile with suitable screws with complete set on wall.(Havells /Philips/equivalent) |
| 16 | Supply and fixing of 150W 24V LED driver an electronic power supply that converts standard AC mains voltage into a stable, constant 24V DC output with necessary Connection . (Havells /Philips/equivalent) |
| 17 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp |
| 18 | Supply and fixing of 300 mm (12\\") sweep (Light duty) AC exhaust fan complete without provision of hole in the wall |
| 19 | Supply and fixing of 3 nos.5A (3pin and 2 pin combined flush type wall socket with control switches on wall suitable TW box covered with hylem sheet with earth connection |
| 20 | Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 15A flush type switch one suitable TW box |
| 21 | Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 22 | Supply and clamping of 31/2 x 25 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. |
| 23 | Supply and fixing of brass cable gland for 3 ½ x 25 sq.mm PVC LTUG armoured cable with earth connection |
| 24 | Supply and providing cable end termination of 3 ½ x 25 sqmm PVC LTUG Aluminium armoured cable withnecessary aluminium cable sockets by crimping etc. with electrical connection complete. |
| 25 | Supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5sq.mm copper wire with painting of suitable colour. |
| 26 | Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 6sq.mm copper wire with painting of suitable colour |
| 27 | Supply and Run of 3 Core Flexible 2.5 sq.mm. Cable FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with with painting of suitable colour. |
| 28 | Supply and Laying of 4 x 10sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 29 | Supply and clamping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 30 | Supply and fixing of brass cable gland for 4 x 10sq.mm PVC LTUG armoured cable with earth connection |
| 31 | Supply and Laying of 2 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 32 | Supply and clamping of 2 of 10 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. |
| 33 | Supply and fixing of brass cable gland for 2 x 10 sq.mm PVC LTUG armoured cable with earth connection. |
| 34 | Supply and fixing of 32A DP MCB with suitable SMC box Enclosure for street light on wall with suitable necessary connection. Higher end |
| 35 | Supply and fixing of 32A FP SMC box Enclosure with suitable 32A FP MCB on wall with suitable necessary connection.Higher end |
| 36 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End |
| 37 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. |
| 38 | Supply and fixing of Pillar box 3 feet x 2 feet enclosure of Vertical type 4 way MCB DB enclosure metal door with IP 42 protection with Four Pole 63 Amps MCB as incoming, 2 Nos 32A TPMCB and 6 Nos Single Pole 6A to 32A, 10KA as outgoing with earth connection including necessary angle iron frame work. (The MCCB DB, MCB's should be Higher end. |
| 39 | Supply and fixing of Pillar box 3 feet x2 feet enclosure of Vertical type 4way MCB DB enclosure metal door with IP 42 protection with Four Pole 63 Amps MCB as incoming and 12 Nos Single Pole 6A to 32A, 10KA as outgoing with earth connection including necessary angle iron frame work. (The MCCB DB, MCB's should be of Higher end) |
| 40 | Supply and fixing of UPVC cable management box of size 50mmx 50mm with Joint cover ,end cap necessary connection etc., |
| 41 | Supply and fixing of UPVC cable management box of size 100mmx 50mm with Joint cover necessary connection etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender