Tender For Supply Installation Testing & Commissioning Of 6 No. Lifts At 500 Bedded Hospital Dr.Rpgmc Tanda.(Sh:- Providing Additional Alteration Of Civil And Electrical Work Therein.).
Tender Value
25.65 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
3 days left
EMD
51400
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing & Commissioning Of 6 No. Lifts At 500 Bedded Hospital Dr.Rpgmc Tanda.(Sh:- Providing Additional Alteration Of Civil And Electrical Work Therein.).
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 3 | For thickness of tiles 10 mm to 25 mm |
| 4 | For thickness of tiles above 25 mm and up to 40 mm |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 7 | Providing and laying vitrified floor tiles in different sizes (Thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse stand) jointing with grey cement slurry @ 3.3kg / sqm including grouting the joints with white cement and matching pigments etc. complete. |
| 8 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in Charge.Polished Granite stone slab jet Green, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position andbinding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 11 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. |
| 12 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge.(Glazing, paneling and dash fasteners to be paid for separately) |
| 13 | For fixed portion |
| 14 | Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC15). |
| 15 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 16 | Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC15). |
| 17 | Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/ sqm). |
| 18 | Providing core cutting in the existing concrete front wall as required complete in all respects. as per direction of Engineer - in- charge. |
| 19 | Providing, erecting, maintaining, and dismantling scaffolding of required height and configuration for safe installation of lifts, including all labour, materials, tools, transportation, safety measures, and compliance with relevant safety standards, complete in all respects.” |
| 20 | Old Staff Lift with 5 Floors |
| 21 | Patient lift No. 2 with 5 Floors |
| 22 | Patient lift No. 2 with 5 Floors |
| 23 | Service Lift with 6 Floors |
| 24 | Emergency Lift with 3 Floors |
| 25 | Maternity Lift with 3 Floors |
| 26 | Less Credit of Dismantle material(LS) (-)(6000/-) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender