Tender For Additional & Repairing Of Tennis Court Fencing And Other miscellaneous Civil Work Including Filtration System At Padma Bhushan Sports Complex - Diu And Sports Complex Ghoghla.
Tender Value
1.62 Crore
Estimated cost
Bid Submission
25 Aug 2026
0 days left
EMD
3.24 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Diu → Daman and Diu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional & Repairing Of Tennis Court Fencing And Other miscellaneous Civil Work Including Filtration System At Padma Bhushan Sports Complex - Diu And Sports Complex Ghoghla.
BOQ
| Sl. No. | Item Description |
| 1 | Works |
| 2 | Providing and laying cement concrete flooring 1:1.5:3 (1-cement :1.5-coarse sand : 3-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick. |
| 3 | Excavating ,supplying and filling of local earth (including royalty ) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layer not exceeding 20cm in trenches,plinth,sides of foundation etc complete engineer-in-charge |
| 4 | Providing and fixing (Chainlink Fencing) with fabrication of M.S. Angle vertical support of size 75x75x6 mm and horizontal support of 50x50x6 mm on top, centre and bottom with galvanize chain link 50x50 - 10 guage jali fitted with 40x6 mm M.S. flat including welding and erecting the same in position in cc block 1:2:4 of size 50x50x60 cms at 3 mtr C/C spacing with necessory excavation including two coats of oil Painting over single coat of primer etc complete as directed & including one open able gate 3'' ft wide and 7 ft in ht. including of two coats of oil paint on M.S. Structure as per drawing & directed by Engineer in charge |
| 5 | Providing and Fixing Channel Grating for swimming pool made from slip resistent material of DIN Standards and class C of Anti Slip coefficient of friction,durable and easy to clean, impervious to algae and chemical resistant etc complete all up to satisfaction of Engineer In Charge. |
| 6 | Providing and Installation of 8-Layer system Acrylic flooring with Sub base including MS Pipe fencing Jali and Surface drain etc., for Pickle Ball Court as per approved specification as directed by Engineer-in-Charge. |
| 7 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. |
| 8 | Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete. |
| 9 | Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. |
| 10 | Rectification, Repair and Levelling on Existing Subbase for Sports Courts a) Assessment and evaluation of current base conditions. b) Repair of any cracks, voids, or damaged areas in the existing court. c) High-quality repair materials on existing Court. Application of suitable materials to ensure structural integrity and longevity. |
| 11 | Supply and installation of FIBA approved and IAAF Approved Lab Tested synthetic PU system for Sports Court. The product must have 16 mm total thickness with base layer of 8mm thickness and top layer of 8mm thickness respectively and should conform to the technical specifications: having Force Reduction between 36%-40%, Vertical Deformation 1.3-1.7mm, Permeability 0.0580.06 cm/s, tensile strength 0.55-.0.57 N/mm2 to be laid on prepared sub base with line markings as per FIBA guidelines and as per the instructions of the Engineer In-Charge complete in all respect. |
| 12 | Supply and fixing Basketball Pole made of 8” dia pipe with 3.2 meter projection and basketball board transparent acrylic imported 25mm thick size 180cm x 105cm with dunking ring, net and frame. Ring is bolted through the backboard into the main frame construction for extra strength and durability Use of branded MRF Epoxy paint. |
| 13 | Supply Movable Volleyball Poles Made of 3” x 4” Mild Steel pipe height adjustable with inside special ratchet system for tightening the net. This enables perfect tension control for the net. Trolley made from 4” x 2” MS pipe with removable Iron box filled type, weight. Per pole is approx. 200 kg. Combined Iron weight of both poles is approx. 400 kg. Iron weights are covered with non-tearing PVC cloth. Easy moving on 2 fixed type PU wheels and one collapsible PU wheel, which are non-marking branded wheels to help protect floors. Use of Branded MRF Epoxy paint |
| 14 | Supply Hand Ball Goal post movable in ground type made of 80 x 80mm Heavy MS pipe size 3m x 2m with back support made of 1.5” heavy pipe and PU wheels. Special net lock made of PVC for easily hanging the net. Fully welded corner joints provide superior strength and added safety for players. Use of branded MRF Epoxy paint |
| 15 | Providing and supplying Kho-Kho poles made of first-class seasoned hardwood (Teak Wood/Sal Wood or equivalent approved hardwood), conforming to Kho-Kho Federation of India specifications, cylindrical in shape, machine turned and smoothly finished, free from cracks, knots, warping and other defects, having a diameter of 120 mm to 125 mm and overall length suitable for providing 1.20 m height above ground level after fixing, duly treated with wood preservative and finished with two coats of synthetic enamel paint/polish of approved shade, including all lead and lift, loading, unloading, transportation to site and stacking complete as directed by the Engineer-in-Charge. |
| 16 | Providing and fixing 9.0 metre (30 ft.) high pole complete with suitable foundation, including excavation, PCC/RCC foundation, anchor bolts, base plate, erection and alignment of pole, and mounting of 4 Nos. LED flood light fittings on each pole, including flood light brackets/clamps, internal/external wiring with suitable size PVC insulated copper conductor cable, junction box, earthing connection, nuts, bolts, hardware, accessories, testing and commissioning, complete in all respects and as directed by the Engineer-in-Charge. |
| 17 | Providing, supplying, fixing, testing and commissioning LED flood light fitting of approved make, wattage and specification, mounted on building wall using suitable MS/GI bracket, including all necessary clamps, fasteners, anchor bolts, PVC insulated copper conductor wiring from nearest point of supply, connectors, glands, lugs, junction box, hardware accessories, making electrical connections, testing and commissioning, complete in all respects as required and as directed by the Engineer-in-Charge. |
| 18 | Providing and fixing nylon net of 2.5 mm thickness, of approved quality and appropriate mesh size as specified, including cutting to required dimensions, stitching, tying with nylon rope/cable ties, fixing to existing poles, frames or supporting structures, complete with all necessary accessories, labour, loading, unloading, transportation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender