Tender For Repairing Of Polyhouse-03 Nos. At Hawalbagh.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Sep 2026
12 days left
EMD
11000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Almora → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairing Of Polyhouse-03 Nos. At Hawalbagh.
BOQ
| Sl. No. | Item Description |
| 1 | Specifications of Repairing of Polyhouse |
| 2 | Polyhouse Current Polyhouse Modification in This work needs to be done Dimension current Polyhouse1. Net House Length x Breadth: 12.25 Side Height: 2.05 m 3.05 m Centre Height: 3.15 m 4.15 m • Polyho use side and centre height should be increased by 1m.• The polyhouse is to be fabricated using a 200 Micron UV transparent Polyfilm sheet.• The dimension of 12.25 m x 6.34 m x 1.10 m (Length x Width x Height) are to be fabricated with GI 40 Mesh Insect Proof Net on both side of polyhouse.• Plant stacking system (with SS wire) is to be installed.• 1 hp Pump ISI Mark is to be installed.2. Polyhouse Length x Breadth: 18.5 m x 6.15 m Side Height: 2.10 m 3.10 m Centre Height: 3.12 m 4.12 m• The side and centre height of the polyhouse needs to be raised by 1 meter each.• The polyhouse is to be fabricated using a 200 Micron UV transparent Polyfilm sheet.• The dimension of 18.5 m x 6.15 m x 3.10 m (Length x Width x Height) are to be fabricated with GI 40 Mesh Insect Proof Net on both side of polyhouse.• A Plant stacking system (with SS wire) is to be installed.• A 500 Litre water tank needs to be installed for irrigation purposes.3. Polyhouse 1380 mm exhaust fan (light weight ) : 2 Nos. with MotorReplacement of Cooling Pad : 16.16 sq meter and GI pad Gutter(10.10 m x 1.6 m x 0.07 m) Length x Width x Thickness1 hp Pump ISI Mark for cooling pad : 1 Nos.1.5 hp Pump ISI Mark for drip irrigation: 1 Nos.500 Litre Water Tanks are to be installed: 02 Nos.Wire to be fitted for stacking of plants.Minor electricity work may be applied in all three polyhouses Grain Counter (electronic) Option IIArticles to be counted: 0.1 to 18 mm in diameter.Counting Performance Typical values: Approximately 0.5 mm diameter approximately 100,000 units per hour2.0 mm diameter approximately 35,000 units per hourAccuracyLess than1/1000 error rate Counting RangeThe entire size range of the objects should be processed using the same, universally adjustable conveyor bowl. Detection of ObjectsObjects are detected by a very precise and, for the most part dust-insensitive infrared light barrier. It can be cleaned by wiping two surfaces, without dismounting any parts.Removal of Residual SubstancesSmall, unwanted objects in the counting material should be excluded from counting procedure and adjustable sensitivity of the parts sensor should be thereConstruction:The Dimensions should not be more than: W x D x H: 250 x 350 x 200mm approximatley and Weight should be about 10-15kgPower Supply: 230 volts ± 10%Software for counting storage and weighing should be provided.- All parameters, results or settings can be logged and stored on the control PC.- Product names can also be entered with a barcode reader- The width of the outlet of the conveyor bowl should be manually adjustable for different seed sizesAt least two years warrantyInstallation and testingUser list mustCIP ICAR-VPKAS Hawalbagh Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender