Tender For Supply, Erection, Commissioning Of 15Hp Submersible Motor Pump Set And Construction Of Pump House, Protection Wall And Providing Pumping Main From The Bore Well Site At Cholankurichi To The Existing Sump At Cholankurichi Oht At Ambagarathu
Tender Value
2.95 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
7 days left
EMD
5912
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karaikal → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Erection, Commissioning Of 15Hp Submersible Motor Pump Set And Construction Of Pump House, Protection Wall And Providing Pumping Main From The Bore Well Site At Cholankurichi To The Existing Sump At Cholankurichi Oht At Ambagarathur For Feeding Water To Jawahar Nagar Oht Distribution Network At Ambagarathur S/W: Supply, Erection, Commissioning Of 15Hp Submersible Motor And Pumpset To The Newly Erected Bore Well At Cholankurichi Village, Ambagarathur In Thirunallar Commune, Karaikal
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc., complete (the tail pieces if required will be paid separately) - 100 mm dia. |
| 2 | Providing and fixing C.I. Ball type non return valve (PN 1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc., complete (the tail pieces if required will be paid separately) - 100 mm dia. |
| 3 | Providing and fixing in position G.I. bend conforming to IS 1239 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 100 mm dia. |
| 4 | Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc, complete - 100mm dia. |
| 5 | Supplying of electrically operated wet type submersible motor and pumpset , AC 3 phase, 415 volts, 50 Hz, 2900 -3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages having outlet size of 2\\"/2.5\\"/3\\" dia. to suit the borewell (150 / 200mm dia.), complete. The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning. (15 HP Submersible motor and pumpset). |
| 6 | Supplying and fixing one set wall mounting / standing type panel board of size 900mm x 300mm x 150mm of M.S. angle (30mm x 30mm x 6mm). The panel should have suitable arrangements for fixing Voltmeter, Voltmeter selector switch, Ammeter, Ammeter selector switch, 3 Nos of Indicator, 3 Nos of flush type switch, 3 Nos of flush type fuses, 3 Nos of incandescent bulbs, 3 Nos of C.T. Coil etc. including wiring with 4 sqmm and 1.50 sqmm copper wire - 100 Amps TPN main switch.-15HP to 20HP. |
| 7 | Supplying and fixing of 7.5KVAR power capacitor for 15 HP motor complete. |
| 8 | Supplying and fixing of fully automatic air break star delta starter range for 10A to 23A F.A.S.D. with suitable M.S. angle frame etc., complete.- 15HP to 17.5 HP pumpsets. |
| 9 | Supplying and fixing of 1 x 3 x 6 sqmm (single run) PVC insulated copper submersible flat flexible cable complete.- 12.5HP to 20HP pumpset. |
| 10 | Laying of UG cable and providing termination of cable joint with suitable cable gland, cable socket etc., complete - 3.5/4 x 25 sqmm cable. |
| 11 | Supplying and fixing of meter board of size 600 mm x 900 mm x 150 mm on suitable angle frame with suitable water proof plywood 12mm thick for receiving ED supply. The board frame shall be painted and covered on all sides by 16 gauge M.S. sheet and fixed with 3 Nos. of 100 Amps fuse carrier (Havells/ Standard/ Anchor make) with screws etc., complete. |
| 12 | Supplying, fixing and lowering into the borewell high tensile threaded PVC column pipes which are to be connected to the submersible pump, including labour charges, jointing materials etc.,complete.-100 mm dia. |
| 13 | Supplying and fixing of C.I. adopter which is to be connected to submersible pump delivery pipe.-100 mm dia. |
| 14 | Supplying and laying of 16mm dia nylon rope for holding of motors. |
| 15 | Supply and fixing of 80/100mm dia. M.S. erection clamps of size 80 mm x 12 mm with bolts, nuts, washer etc., complete. |
| 16 | Erection, testing and commissioning of submersible motor and pumpset complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender