Tender For Supply And Installation Of E&M Equipment Of Tube Well No. 02 Inside Tahirpur And Tahirpur Nursery.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Aug 2026
5 days left
EMD
8200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Supply And Installation Of E&M Equipment Of Tube Well No. 02 Inside Tahirpur And Tahirpur Nursery.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Panel board suitable for 415 Volts, 3 Phase, 50 Hz, 4 Wire System for operation of 10-15HP Submersible Pump set with automatic phase corrector, made out of 2mm thick CRCA sheet for load bearing members, totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets. the panel will be as per standard given in relevant IS. The bus bar will be covered with heat shrinkable PVC sleeve throughout in red, yellow & blue color to identify three phases & black for neutral. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a copper ferule crimped to the wire. The panel will have MS angle stand in 50x50x5mm size. Having MCCB 63Amp. 415V, 50Hz 18 kA TPN of High breaking capacity, Power contactor 220V 32Amp. and 24 Amp (with aux contact block), Thermal overload protection relay, star delta timer, timer switch, motor protection relay, Indicating lights RYB, on-off set, Amp. Meter & Volt meter, controls MCB TPN Amp. & selector switches, Auto Manual Reset, 2CO Contact, Change over switch, terminal block 6 - way, Make: - L&T/Havells/C&S/ Any DJB approved make. |
| 2 | Supply of PVC insulated PVC sheathed, copper conductor(flexible) cable, Size 3 core x 6 Sq mm, 1100 Volts, conforming to IS 694. Make:- Havells/Finolex/Polycab/ Any DJB approved make |
| 3 | Supply of 80mm dia. B class GI pipe length 3 Mtr. With duly Welded and threaded flange in both sides, complete with cutting of flange for cable and welded support in both flanges as per site requirement. Make: - Jindal/ Parkash/ Surya/Tata/Jindal Hisar/Jindal Ghaziabad / ISI. |
| 4 | Supply of G.I. tail piece medium class of 0.5 mtrs long including one end flanged and another end threaded of 80mm as per site requirement. |
| 5 | Supply of 80mm dia. GI Bend with both side flanges duly welded and threaded as per site requirement. |
| 6 | Supply of M.S. Clamp of MS strip duly hole for holding the pipe of 80mm dia. with nut bolts and washer. |
| 7 | Supply of M.S. Bore cover made out of MS plate suitable for 12\\" dia. bore complete with suitable hole for passing the 80mm dia. GI Pipe |
| 8 | Supply of Nut Bolts, Washer of good quality as per requirement |
| 9 | Supply of rubber packing sheet with 50 % Neoprene (1.5 mm to 25 mm) ISI Mark. (Payment will be made as per Actual). SOR (E&M) 2025 item code 22.6.1 |
| 10 | Fabrication/ Supply of venturi assembly 80 mm dia. with complete accessories as required at site. |
| 11 | Supply of CI double flanged swing type non return valve 80 mm as per IS:5312 PN 1.0 CI body door / bronze to rubber ring / SS 410 twin pin SOR (E&M) 2025 item code 4.14.3 Make: - IVC/Kirloskar/Skope/Shiva Durga/Any DJB approved make. |
| 12 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (D.S.R 2022 E&M Code No1.8.3) Group C |
| 13 | 36W LED fixture with LED lamp, basic all-purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver. SOR (E&M) 2025 item code 19.3.3 Make: - Havells / Philips / Crompton . |
| 14 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3X2.5 sq.mm (D.S.R 2022 E&M Code No -1.17.12) |
| 15 | Supply of electrical dozing pump (4lph, 5.5 kg/cm, supply chemical grade tank of 100ltrs with NRV, Foot Valve with NRV, Injector Valve and tube (pipe) etc Make:- Clormax /Milton Roy / Any DJB approved make. |
| 16 | Fabrication and fixing of MS main hole cover at the roof of tube well as required size with opening & locking arrangement for lowering/lifting of pump set at site, fabricate by angle 65x65x6mm and MS plate 5mm thickness by welding, Cutting and machining work as required with the help of man power and tools & tackles. |
| 17 | Fixing of above MS main hole cover with the help of labour and required logistic arrangements and making all required connections by using all tools & tackels. |
| 18 | Workmanship Charges for lowering the submersible pump set one no. in new bore well, Fixing/Erection/Installation of above E&M equipment, accessories, The work includes all sundry required items for completion of work, i.e., eccentric taper, rubber gasket, necessary reinforcement etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required with adequate safety provision while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-in-Charge. The all-sundry items which are useful & necessary for operation of tube well in automation mode shall be deemed to have been included, whether such items are especially in specification or not. |
| 19 | Testing and commissioning of tube wells on load/off load with satisfactory functioning of Pump. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender