Tender For General-Ae(2)07A/2026 -Rkvy-Infrastructure Development Works At Ces Ambalavayal-General Civil Work
Tender Value
55.71 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
7 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wayanad → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Ae(2)07A/2026 -Rkvy-Infrastructure Development Works At Ces Ambalavayal-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Appendix-1-Construction of Poly House - 36mx32m |
| 2 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 3 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 4 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 5 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 7 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). |
| 8 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 9 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 10 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) |
| 11 | OD830/2026-2027:Supplying and laying 200micron UV stabilzed 5 layer ploy films on the GI trussed work with aluminium channels of appropriate weight 100gm/mtrs.Double spring locaking 0.8mm thick smooth edages flat bottom and pvc coated zig zag springs of appropriate dia and excellent elasticity with out damaging the ploy film. the channels fixed on the trusses using self drill screws galvanized with washers, The cost is exclusive of channels and screws |
| 12 | OD819/2026-2027:Supplying and fixing aluminium locking profile and zig zag spring for fixing UV filim and insect proof net including all cost of labour, material including screws , conveyance etc complete |
| 13 | OD832/2026-2027:Supplying and fixing of 125 GSM weed mat |
| 14 | OD825/2026-2027:Supplying, Fixing and Laying 40mesh insect proof net The cost inclusive of all moving mechanism. |
| 15 | OD816/2026-2027:Supplying, Fixing and Laying UV stabilized, 50% shade, light diffusing aluminet net ? not less than 90 gsm thick, has to be provided horizontally at gutter height, below the UV sheet -inside the polyhouse, operated manually or with motor mechanism for expanding and retracting. The cost including cost of GI Wires for support. |
| 16 | OD829/2026-2027:Supply and fixing 2 inch or nearer sliding gate rollers diameter 48mm,thickness 17mm,groove v gate whee,v track roller with outer support, steel rail roller for supporting seedling trays. |
| 17 | OD828/2026-2027:Supplying and fixing of 2 HP submersible Horizontal Centrifugal 5 strar rating Open well water pumpset confirming to ISI Standards with Steel Body and suitable impeller with discharge 1 LPS and Head 50m with control panel including earthing and Pipe fittings all required complete |
| 18 | OD817/2026-2027:Supplying HDPE Pipe ,PE80,PN6, 50mm dia confirming to IS 4984/2016 with specials for plumbing |
| 19 | OD831/2026-2027:Supplying and fixing 22 feet or nearer Boom sprayer for seedling production unit fitted on guide channels of suitable size in GI frame work with roller support and moving assembly powered by a suitable motor for movement on rails and connected with a pump for spraying with triple nozzles with adjustments for various spraying volumes. The rail should connect to both the compartments of seedling production unit of 8m width each for a length of 36m. |
| 20 | OD837/2026-2027:Supplying and fixing PVC coated GI wire 10g for supporting lateral pips and hanging emitters |
| 21 | OD833/2026-2027:Supplying and fixing Mist Nozzle (Hanging Type): UV-stabilized engineering plastic/acetal mist nozzle with stainless steel or ceramic orifice, suitable for connection to 4 mm × 7 mm UV-stabilized micro tube, having minimum wetted diameter of 1.8 m, discharge 30-40 LPH at an operating pressure of 2.0-3.0 kg/cm², producing 80-150 micron droplets with 80°-100° full-cone spray pattern, complete with take-off connector, grommet, hanging adaptor and all necessary accessories for overhead installation in polyhouse seedling nurseries. |
| 22 | OD818/2026-2027:Supplying leak proof four way fogger emitters full circle operating pressure 2 bars around 4 lph,50 micron droplet size suitable for climate control manufactured by approved and reputed irrigation manufactureswith minimum one year on site warranty |
| 23 | OD834/2026-2027:Supplying and laying16mm LDPE pipe |
| 24 | OD836/2026-2027:Supplying and fixing LDPE Gromet 16mm for connection |
| 25 | OD826/2026-2027:Supplying and fixing end cap LDPE 16mm size |
| 26 | OD822/2026-2027:supplying and fixing PVC flush valve 63mm size |
| 27 | OD835/2026-2027:Supplying, installing, testing and commissioning Indian-made automatic fertigation unit comprising programmable irrigation/fertigation controller, venturi-based fertilizer injector with bypass assembly, 120 mesh screen filter, pressure gauges, pressure regulating valve, non-return valve, isolation valves, flushing arrangement, suction hose with foot valve and strainer, complete with HDPE/PVC fittings and accessories, suitable for operation at 1.5-4.0 kg/cm² working pressure and 2-10 m³/h flow rate, compatible with drip and micro-irrigation systems, complete in all respects |
| 28 | OD824/2026-2027:Supplying and fixing 63mm PVC ball valve with fittings |
| 29 | 18.19.3.1:Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreHorizontal |
| 30 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | 50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 |
| 32 | OD1478/2026-2027:Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 |
| 33 | OD821/2026-2027:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 160x160x160 mm dia Tee |
| 34 | OD820/2026-2027:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 160 mm dia Bend |
| 35 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 36 | OD1504/2026-2027:Supplying and fixing Name boards in GI Sheet ( 16Guage) fixed in GI pipe frame work and fixed to ground with CC 1:2:4 including painting board with primer, synthetic enamel paint and including cost of Writing project details in paint |
| 37 | OD2343/2026-2027:Supplying and fixing 3 Core × 4 sq.mm Copper Armoured Cable for pumpset |
| 38 | Construction of Rainshelter for sales counter |
| 39 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 40 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 41 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 42 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 43 | 5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 44 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 45 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 46 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 47 | OD850/2026-2027:Supplying and laying 200micron UV stabilzed 5 layer ploy films on the GI trussed work with aluminium channels of appropriate weight 100gm/mtrs.Double spring locaking 0.8mm thick smooth edages flat bottom and pvc coated zig zag springs of appropriate dia and excellent elasticity with out damaging the ploy film. the channels fixed on the trusses using self drill screws galvanized with washers, The cost is exclusive of channels and screws |
| 48 | OD846/2026-2027:Supplying and fixing aluminium locking profile and zig zag spring for fixing UV filim and insect proof net including all cost of labour, material including screws , conveyance etc complete |
| 49 | OD851/2026-2027:Supplying, Fixing and Laying 40 mesh insect proof net The cost inclusive of all material, labour etc complete |
| 50 | OD1590/2026-2027:Supplying, Fixing and Laying UV stabilized, 50% shade, light diffusing aluminet net ? not less than 90 gsm thick, has to be provided horizontally at gutter height, below the UV sheet -inside the polyhouse, operated manually or with motor mechanism for expanding and retracting. |
| 51 | OD845/2026-2027:Supplying and fixing of 125 GSM weed mat |
| 52 | 50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 |
| 53 | 50.18.9.5.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2 |
| 54 | OD2396/2026-2027:Supplying and fixing 63mm PVC ball valve with fittings |
| 55 | 18.19.4.2:Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreVertical |
| 56 | OD844/2026-2027:Supplying LDPE Gromet 16mm for connection |
| 57 | OD847/2026-2027:Supplying 16mm LDPE pipe |
| 58 | OD848/2026-2027:Supplying and fixing PVC coated GI wire 10g for supporting lateral pips and hanging emitters |
| 59 | OD854/2026-2027:Supplying and fixing Plastic micro sprinklers by approved and reputed irrigation manufactureswith minimum one year on site warranty |
| 60 | OD849/2026-2027:Supply end cap LDPE 16mm size |
| 61 | OD852/2026-2027:Providing and fixing PVC Ball valve 40mm size |
| 62 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). |
| 63 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 64 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 65 | OD2345/2026-2027:Supplying and fixing of 0.5 HP Centrifugal mono block 5 strar rating water pumpset confirming to ISI Standards with Steel Body and suitable impeller with discharge 0.75 LPS and Head 15m with control panel including Pipe fittings all required complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender