Tender For Installation/Construction Of Larval Feed Experimental Facility At Icar-Cifa, Kausalyaganga, Bhubaneswar
Tender Value
29.91 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
12 days left
EMD
1.49 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation/Construction Of Larval Feed Experimental Facility At Icar-Cifa, Kausalyaganga, Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Supply of PP Cylinder Type RAS TankHeight 700 mm, Dia 700 mm, tank wall thickness 5 mm, Bottom thickness 12 mm, 50 mm drain valve, 32 mm intake waterline valve, water capacity 230 ltr conical shape bottom. |
| 2 | Supply of Circular PP TankHeight 600 mm, Dia 500 mm conical shape botton wall thikness 3 mm, bottom 8 mm, water capacity 130 ltr |
| 3 | Supply of A compact RAS system with a capacity of 10000 ltr with the following components:a. Sediment filterb. Bucket filterc. Biological filterd. Uv sterilizere. 0.3 hp pumpf. plumbing accessoriesg. Control panel |
| 4 | Packing & Transportaion Charges (For RAS System with all tanks, accessories)Chennai to Bhubaneswar |
| 5 | Installation Charges (For RAS System with all tanks, accessories ) with all fitting such as control valves drainage system / supply system etc. |
| 6 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar(Item Code: 15.7.4) |
| 7 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. Metres(Item Code: 15.12.2) |
| 8 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.(Item Code: 15.18) |
| 9 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet(Item Code: 15.28.1) |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All Kind of Soil. (Item Code: 2.8.1) |
| 11 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (Item Code : 2.27) |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)(Item Code : 4.1.8) |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)(Item Code : 4.1.3) |
| 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(Item Code : 5.2.2) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (Item Code :5.3) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers. (Item Code : 5.9.5) |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts(Item Code : 5.9.6) |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Hot rolled deformed bars (Item Code 5.22A.4) |
| 19 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :Cement mortar 1:4 (1 cement : 4 coarse sand)(Item Code : 6.34.1) |
| 20 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate(Item Code : 11.3.1) |
| 21 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(Item Code : 10.2) |
| 22 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes (Item Code : 10.16.2) |
| 23 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Item Code : 12.50) |
| 24 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)(Item Code : 12.51.1) |
| 25 | 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)(Item Code : 13.3.1) |
| 26 | 20 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)(Item Code : 13.6.1) |
| 27 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster(Item Code : 13.9.2) |
| 28 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Item Code : 13.80) |
| 29 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)(Item Code : 13.46.1) |
| 30 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm(Item Code : 13.48.1) |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work(Item Code: 13.61.1) |
| 32 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion:Powder coated aluminium (minimum thickness of powder coating 50 micron)(Item Code : 21.1.1.2) |
| 33 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)(Item Code : 21.1.2.2) |
| 34 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)(Item Code : 21.3.2) |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.50 mm nominal dia Pipes (Supreeme / Prince / Ori plast) (Item Code : 18.9.6) |
| 36 | Providing and fixing 50 mm dia UPVC tee of approved make (Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 37 | Providing and fixing 50 mm dia UPVC elbow of approved make (Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 38 | Providing and fixing 50 mm dia UPVC Socket of approved make(Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 39 | Providing and fixing 50 mm dia UPVC Union of approved make (Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 40 | Providing and fixing 50 mm dia UPVC Control Valve of approved make (Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes. (Item Code: 18.9.3) |
| 42 | Providing and fixing 25 mm dia UPVC elbow of approved make(Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 43 | Providing and fixing 25 mm dia UPVC Socket of approved make (Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 44 | Providing and fixing 25 mm dia UPVC Union of approved make (Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 45 | Providing and fixing 50mm - 25 mm dia UPVC reduced tee of approved make (Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 46 | Providing and fixing 25 mm dia UPVC control valve of approved make (Supreeme / Prince / Ori plast) as per the direction of Engineer in charge |
| 47 | Providing and fixing 2000 ltr capacity water tank of approved make (Supreeme / Prince / Ori plast) (Four layers) with brick massonary enclosure (wall making / plastering / colouring) as per the direction of Engineer in charge |
| 48 | Supplying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size 16sq.mm (4core) as per requirement of the Institute |
| 49 | Supplying and fixing following way(6 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. with dismantling of existing DB as required. (But without MCB/RCCB/Isolator)(code:2.4.1) |
| 50 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. with dismantling of existing one with white washing as required.(Code:1.10.2) |
| 51 | supplying and fixing of 6way GI board with modular cover plate with 1nos. 15A Switch and 1nos. 15A Socket and 1nos. 5A Switch and 1nos. 5A Socket as per requirement of the Institute. |
| 52 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 53 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes (2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire) of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 54 | Supplying and fixing of Suitable size GI board with modular cover plate with 3nos. 5A ,modular Switch and 3nos. 5A modular Socket as per requirement of the Institute. |
| 55 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes (2 X 6 sq. mm + 1 X 6 sq. mm earth wire)of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(UPS line) |
| 56 | Supplying and fixing of 32A MCB (4 pole) as required. |
| 57 | Supplying and fixing of 32A DP MCB with enclosure box as per requirement of the Institute. |
| 58 | Supplying and fixing of 25A SP MCB as required. |
| 59 | Supplying and fixing of 10A SP MCB as required. |
| 60 | Supplying and fixing of 20W LED tube light as required. |
| 61 | Supplying and fixing of 78W high speed fan as per requirement of the Institute. |
| 62 | Supplying and fixing of 45W LED street light with bracket clamp as required. |
| 63 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including GI wire accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.(Code:5.2) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender