Tender For Addition / Alteration To Bldg No P-102 At Af Stn Bkt
Tender Value
4.93 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
18 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition / Alteration To Bldg No P-102 At Af Stn Bkt
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation over area , not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | M&L for PCC (1:4:8) type-D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete.sub base as in floors complete all as specified and directed. |
| 4 | M&L for RCC Design Mix M-25 using 20mm graded stone aggregate as in column, pillars, piers, posts and struts complete all as specified and directed. |
| 5 | Demolation of birck work built in cement mortar including all quoin, arches pillars byt excluding ashlar facing dressed stone work and precast concrete article complete all as specified and directed. |
| 6 | M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed. |
| 7 | M&L for Brick work with fly ash old size bricks, straight or curved to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed. . |
| 8 | Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 9 | Removing excavated material not exc 50 m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed. |
| 10 | M&L for RCC (Design Mix M-25), (20mm graded aggregate) as in,foundation,including foundation beams,pinth beams,bases for columns,etc, and mass concrete including all form work complete all as specified and directed. |
| 11 | M&L for RCC Design Mix M-25, using 20mm graded aggregate as in beams , cantilevers, lintels over 1.5 m span including all form work complete all as specified and directed. |
| 12 | M&L for RCC Design Mix M-25, using 20mm graded aggregate) as in slab supported on walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like including all form work complete all as specified and directed. |
| 13 | M&L for RCC (Design Mix M-25), (20mm graded aggregate) as in Chajjas including all from work complete all as specified and directed. |
| 14 | M&L for MS TMT bars,10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | Ditto- all as per item No 14 above but for 5 to 10mm dia as in stirrups & links etc. |
| 16 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 17 | M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed (WPC shall be measured & paid seperately) under respective items of Sch 'A' given here-in-before. |
| 18 | M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar (1:6), rendering is to be finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over one coat of wall care putty with Mechanical Means and one coat of primer complete all as specified and as directed. Note: Primer and Distemper to be carried out through air less spray machine (Mechanical Means). Make:-Asian paints (Tractor UNO) Berger (Easy clean/ Nerolac Paints (Beauty Acrylic Smooth). |
| 20 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of resistant primer by airless spray machine (mechanical means) of any colour complete all as specified and directed . Make:-Acro Paints Ltd/ Berger (Duracem Extra/ Indigo Floracem/ Asian Paints. |
| 21 | M&L for rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar (1:3) rendering is to be finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for two coats of white wash on ceiling on newly plastered surfaces including preparation of surfaces with air less spray machine (Mechanical Means) complete all as specified and directed. |
| 23 | M&L for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 24 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floors,finished even and fair complete all as specified and directed. |
| 25 | M&L for 25mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor and finished rough to receive the floor tiles etc complete all as specified and directed. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all specified and directed. |
| 27 | M&L for Non - skid Vitrified double charge joint less coloured tiles size 600mm x 600mm x 8-9mm thick as, in floors etc set and jointed in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 28 | M&L for glazed ceramic coloured tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed white or coloured cement to match the surface over and including 10 mm thick CM (1:4) complete all as specified and directed. |
| 29 | M&L for Jet south black granite slab work 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 30 | M&L for Jet south black granite slab work 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender