Tender For Annual Repair & Maintenance Of Directorate Of Health Services , Sda Complex , Kasumpti, Shimla-9. (Sh: Construction Of Cupboards, Providing And Fixing Panelling , Providing And Fixing Ai Windows , Pvc Flooring In Various Rooms In Directorate Of
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Aug 2026
4 days left
EMD
25000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Repair & Maintenance Of Directorate Of Health Services , Sda Complex , Kasumpti, Shimla-9. (Sh: Construction Of Cupboards, Providing And Fixing Panelling , Providing And Fixing Ai Windows , Pvc Flooring In Various Rooms In Directorate Of Health Services Block No.- 5 , Sda Complex Under Parimahal Section . )
BOQ
| Sl. No. | Item Description |
| 1 | Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. (Excluding GST) |
| 2 | Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. MAKE TATA Dura Shine (Excluding GST) |
| 3 | Providing and fixing G.I pipes complete with G.I Fitting including trenching and refilling etc , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) External work (a) 15mm dia nominal bore . (Excluding GST) |
| 4 | Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screw etc complete (New work) , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm dia nominal bore . (Excluding GST) |
| 5 | Providing and fixing 19mm thick HDMR laminated water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 6 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 7 | Providing and fixing HDMR ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 9mm thick. (Excluding GST) |
| 8 | Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)1st class deodar wood . (Excluding GST) |
| 9 | Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 10 | Providing and fixing bright finished brass handles with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (Excluding GST) |
| 11 | Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting including carriage of material in all leads and lifts as per direction of the Engineer-in-charge.(a)Ready mixed paint brushing wood primer pink. (Excluding GST) |
| 12 | Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint. (Excluding GST) |
| 13 | Providing and fixing Bubble sheet behind cup baord/panelling complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 14 | Providing and fixing pine wood readymade plain framed panelling with necessary screws priming coat on unexposed surface including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (Excluding GST) |
| 15 | French spirit polishing two or more coats on new work including a coat of wood filler (Excluding GST) |
| 16 | Providing woodwork in frame of doors windows , clerestory , windows and other frames wrought framed and fixed in position , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 2nd class pine wood (Excluding GST) |
| 17 | Taking our doors windows , clerestory , window shutters (steel or wood) including stacking within 50 meters lead , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Of area beyond 3 sq meters (Excluding GST) |
| 18 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, abidused trabsoarebt ir dyed required shade conforming to IS 1868 (Minium anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/Neoprence felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (i) For fixed portion (a) Powder coated aluminium (minium thickness of powder coating 50 micron) (Excluding GST) |
| 19 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /Neoprence gasket required (Fittings and glazibng/panelling shall be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Powder coated aluminium (minium thickness of powder coating 50 micron) (Excluding GST) |
| 20 | Providing and fixing Glazing in aluminium door window, ventilator shutters and partition etc with PVC/Neoprens gasket etc complete as per the architectiral drawings and the ( the cost of alunium snap beading shall be paid in basic items) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Frosted Glass 5mm. (Excluding GST) |
| 21 | Providing and fixing G.I wire mesh 85 G. with wire of dia 0.56 mm for aluminium windows ventilators shutters etc with PVC / neoprens gasket etc including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( the cost of alunium snap beading shall be paid in basic items) (Excluding GST) |
| 22 | Providing and fixing Brass tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)100x10mm (Excluding GST) |
| 23 | Providing and fixing bright finishing hard drawn hooks and eyes, complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (Excluding GST) |
| 24 | Providing and fixing 1.50mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) MAKE LG including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 25 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 40x40 mm (base and height) (Excluding GST) |
| 26 | Repair to plaster in patches of 2.50 square meter under and upto 10 to 15mm thick including cutting the patch in proper shape and re-plastering the surface of wall including disposal to the dumping ground with a lead of 20 metres with including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) Cement Mortar 1:5(One cement: Five sand). (Excluding GST) |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) Old work (one or more coats) including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 28 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) One or more coats on old work (Excluding GST) |
| 31 | Finishing wall with weather proof exterior grade emulsion of approved design Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 32 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 150x10mm (Excluding GST) |
| 33 | (ii) 200x10 mm |
| 34 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 mm . (Excluding GST) |
| 35 | Provdiing and fixing of 40 cm overall width plain G.S sheet fixed with polymer coated J or L hooks , bolts and nuts , G.I limpet and bitumen washer complete , bent to shape and fixed in wall with cement mortar 1:3(1 cement : 3 coarse sand ). including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1.00 mm thick with zinc coating not less than 275 gm/m2 . (Excluding GST) |
| 36 | Disposal of muck /denris/ excavated earth upto site approved by Municipal Corporation surrounding Shimla upto all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 37 | Providing and Fixing expanded metal, including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 38 | Dismantling wooden boardings in lining of wall and partition , excluding supporting members but including stacking within 50 meters lead ,including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) Thickness above 10 mm up to 25 mm. (Excluding GST) |
| 39 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) G.S Sheet. (Excluding GST) |
| 40 | Providing and Fixing Drawer locker (Godrej), including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender