Tender For Supply Of Equipments/Garden Tools For Horticulture Use In Different Parks Of Ward No.210, Geeta Colony, Shahdara South Zone, Mcd.
Tender Value
1.99 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
4000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of Equipments/Garden Tools For Horticulture Use In Different Parks Of Ward No.210, Geeta Colony, Shahdara South Zone, Mcd.
BOQ
| Sl. No. | Item Description |
| 1 | SUPPLY |
| 2 | Engine : SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLYDisplacement: 45.4CCPOWER OUTPUT : 2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPMCarburetor: Diaphragm type & compensator technology.Fuel tank capacity: Should be minimum 450 ml.Dry weight( without cutting attachment ): Should not be more than 5.0 KGClutch: Clutch shoe LININING metal ONLY.Guide Bar Design: Should be Rollomatic type.Guide Bar Length: Guide bar length must have 50 cm/20\\" inch. Guide bar and Chain: Should have same manufacture only.Chain Type: Every drive link require groove & small oil receiver hole for better Lubrication. 0.325 inch Pitch & 1.6 mm thickness only.chain Lubrication System: Fully automatic ,speed controlled rotary oil pumpChain oil tank capacity: Should be minimum 200 ml.Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable.Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off.Guaranteed Sound power level: Should not be more than115 Db(A)Maximum chain velocity to ISO 11681: Should be minimum 28 m/sCertification: Product should have valid DPLF certificate with test standard EN ISO 11681. |
| 3 | Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLYENGINE DISPLACEMENT: 40.2CCPower Output: 2Kw/2.7HPMax Output shaft speed at cutting attachment: Should be minimum 9000 RPMCARBURETOR: Diaphragm with compensator technology.Fuel Tank Capacity: Minimum 600 ml.WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 KgCLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only.MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle.BRUSHCUTTER HARNESS: Should be double shoulder harness only.ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system.Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2Sound Pressure Level Db(A): Should not be more than 105 dB(A)Drive shaft design: Must have drive shaft ends square design type only.Certification : Must have valid EN Certificaton |
| 4 | Supply of Telescopic Pole Pruner:-Specification:- Pole length incuding blade: 6.5m Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth Blade Length : 15\\"-16\\" Pole type: Light weight telescopic tubular aluminium alloy extendable pole No of positions for pole Height Adjustment : 10 positions Locking Mechanism : Ergonomicvally designed two way locking mechanism Total Working length : Max 21'9\\"(6623 mm), MIn 10'3\\" (3103mm) Branch cutting capacity: 200mm max |
| 5 | Handle Length: 13” to 17” (minimum to maximum).Total Weight: 1.5 to 2.5 pounds (including handle).Head Length: 5” to 7” (blade to butt).Head Height: 1.5” to 4” (parallel to handle).Construction: Single-piece or one-piece solid steel design. |
| 6 | conformity to indian standard , IS:3094-1982, Type of bill hook -Single edgeMaterial of blade- Alloy S\steel conforming to IS 4367 latestMaterial of tang- Mild Steel (as per IS:226-1975)Material of Handle- Timber (as per IS:620-1975)Material of ferrule- Mile steem sheet (as per:1079-1973)Thickness of ferrule -3mmhardness of blade(as per 1500-1968) HB or HBW-400Size of bill-hook for single and double edge type-275mmThickness of blade-5mmLength of Handle including ferrule-150mmwidht of blade-135(single edge) |
| 7 | Supply of Trimmer line (Nylon brush cutter wire) of good quality Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender