Tender For Repair And Maintenance To Boundary Wall, Fothpath, Drains, Fencing,Hard Standing And Other Misc Items In Md Accn Si Lines Under Ge Bhopal
Tender Value
45 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
11 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Boundary Wall, Fothpath, Drains, Fencing,Hard Standing And Other Misc Items In Md Accn Si Lines Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Dismantling wrought iron or mild steel work of any description. |
| 3 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete or masonary |
| 4 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, watering, and removing surplus soil to a distance n exc 50 m and making good surface hard or dence soil complete all as specified and directed. |
| 5 | S&F for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 6 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5CM long (diameter of neck in 11 mm to 15 mm) all as specified and directed. |
| 7 | S&F of chain link fencing of any mesh size and wire thickness (as required on location and approved by GE) including line wires and binding wire and dismantling of old fencing wire mesh any type and fixed in any pattern (weight not less than 2 kg/ sqm) complete all as specified and directed. |
| 8 | M&L plain round bars 5 mm dia over and upto including 10mm bar for fixing in fencing mesh including cut to length bent to shape and welding as required or securing with clips etc complete all as specified and directed. |
| 9 | S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 10 | Welding in repairs of gates, windows and other Mild Steel items size of welding exc 2.5cm but n exc 5cm in length (thickness of metal not exc 6mm ) all as specified and directed. |
| 11 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary fixing to walls, all as specified and directed. |
| 12 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde E-250) quality A complete all as specified and directed. |
| 13 | M&L 1.00 mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, all as specified and directed. |
| 14 | M&L 15 to 18 mm thick granite work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of old stone slab fixed in any mortar and pattern all as specified and directed. |
| 15 | M&L for 18 to 20mm thick marble (makrana white) (approved texture and pattern) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 20mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types including demolition of old stone slab fixed in any mortar and pattern all as specified and directed. |
| 16 | M&L for providing precast cement concrete type B1 1:2:4 (20mm graded stone aggregates) as in decorative moulded columns, posts, boundary pillars, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete with joints to match the exisiting all as specified and directed. |
| 17 | M&L for 25mm thick decorative Dholpur sandstone louvres and jallies of required size and design all mouldings set in CM 1:4 including dismantling of old stone Jallies and removing outside MD land all as specified and directed. |
| 18 | M&L for 60 cm long decorative Dholpur sandstone Post, 75mX75mm size including all mouldings set in CM 1:4 including dismantling of old stone post embedded in concrete or masonary and removing outside MD land all as specified and directed. |
| 19 | M&L for providing factory made precast cement concrete louvres and jallies, 40mm thick type B0 1:2:4 (12.5mm graded stone aggregates) including demolition of old precast/ stone jallies fixed in any mortar and pattern all as specified and directed. |
| 20 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 21 | M&L for preparation of old/ unplasterd concrete/ plastered surfaces and applying one coats of synthetic enamel paint (approved color and pattern), not otherwise described, over 10cm width or girth complete all as specified and directed. |
| 22 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A all as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ-150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed. |
| 24 | All as per item No. 22.00 here-in before but in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) including dismantling of old sheets fixed at any location complete all as specified and directed. |
| 25 | M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 26 | M&L for preparation of old steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 27 | Demolition of concrete in ground floors and pavings n exc 15 CM thickness (below or above ground level) and removing outside MD land complete all as specified and directed. |
| 28 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in post hole complete all as specified and directed. |
| 29 | M&L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope complete all as specified. |
| 30 | Taking out settled bricks/ interlocking paver blocks any thickness (laid flat or on edge) in path, floors, channels, kerbs, aprons, etc. (each layer) laid dry and refixing at same location over required sand cushioing all as specified and directed. |
| 31 | S&F Providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 32 | All as per item No. 30.00 here-in before but of thickness 80mm M-40 grade complete all as specified and directed. |
| 33 | M&L for chequered cement concrete tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed or bedding layer of CM 1:4 all as specified and directed. |
| 34 | M&L for heavy duty parking /outdoor tiles 10mm thick (square/rectangular) area of each tiles not exc 0.11 sqm, in floors set and jointed in neat cement slurry and fixed over 15mm thick screed bed in CM 1:4 including demolition of old tiles all as specified and directed. |
| 35 | M&L providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 CM in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork complete all as specified and directed. |
| 36 | M&L brick work with fly ash brick modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of old masonary all as specified and directed. |
| 37 | M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 including demolition of old stone masonary complete all as specified and directed. |
| 38 | M&L RCC (Nominal mix) 1:11/2:3 type A-1 (using 20mm graded stone aggregate) slabs supported, walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses including demolition of old RCC structure of any description and in any position all as specified and directed. |
| 39 | M&L for reinforced cement concrete (nominal mix) in type A1 1:1½:3 (using 20 mm graded stone aggregate) as in slab, bands, cantilevers, bressummers, lintels over 1.5m span including demolition of old RCC structure of any description and in any position all as specified and directed. |
| 40 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface flat and rough finished surfaces complete all as specified and directed. |
| 41 | M&L for formwork to soffits of Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat and rough finished surface complete all as specified and directed. |
| 42 | M&L TMT reinforcement bars 10mm and over using cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and directed. |
| 43 | M&L TMT reinforcement bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 44 | S&F of factory made precast SFRC (steel fiber reinforced concrete) perforated drain cover/manhole cover of grade M-25 fixed with CM 1:3 of required size and thickness 50mm to be fixed as per direction of Engr-in-charge. |
| 45 | Extra for forming fair finished drain or channel 40 to 50 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped ends etc complete all as specified and directed. |
| 46 | M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement including taking down old plaster from brick or concrete surface and raking out joints complete all as specified and directed. |
| 47 | M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified. |
| 48 | Supply only Intergal water proofing compound all as specified and directed. |
| 49 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion (100% acrylic) over a coat of compatible primer complete all as specified and directed. |
| 50 | M&L for preparation of old decorated surfaces of walls and applying two coats of exterior weather proof water based emulsion paint (100% acrylic) all as specified and directed. |
| 51 | M&L for preparation of old plastered or unplastered surfaces in walls soffits, facia, chajjas and applying one coat of exterior weather proof water based emulsion complete all as specified and directed. |
| 52 | M&L for applying and finishing walls with textured exterior paint over new/old plastered surface of required shade and pattern (Two coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm all as specified and directed |
| 53 | S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor or fixed to walls incl taking down existing damaged pipe with all fittings complete all as specified and directed. |
| 54 | S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or floors or fixed to walls incl taking down existing damaged pipe with all fittings complete all as specified and directed. |
| 55 | M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight including Demolition of concrete in ground floors complete all as specified and directed. |
| 56 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size including dismantling of old railing sections fixed at any location and pattern complete all as specified and directed. |
| 57 | M&L 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations sid lap fixed with L type or J type or cranked hook bolts complete all as specified and directed. |
| 58 | Deduct Schedule of credit (calculation will be done off line) Rs. 26100.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender