Tender For Repair/Replacement To Joinery, Plumbing, Sanitary Fittings And Connected Works At Inside And Outside Ota And Repairs/ Maintenance Of Internal Electric Supply And Low Tension External Electric Supply, Street Light And Allied Works At Dad Co
Tender Value
32 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
11 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Joinery, Plumbing, Sanitary Fittings And Connected Works At Inside And Outside Ota And Repairs/ Maintenance Of Internal Electric Supply And Low Tension External Electric Supply, Street Light And Allied Works At Dad Complex And Repair/ Maintenance Of External Water Supply Pipe Lines, Pump Sets, Cleaning Of Oh Tanks, Ug Sumps, Other Connected Works At Dad Under Ge Stm Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed. |
| 2 | M & L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth without using extra cement on internal surfaces of wall complete all as specified and as directed. |
| 3 | M & L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth without using extra cement, mixed with liquid water proofing admixture including scaffolding arrangement complete (as per manufactures instructions) complete all as specified and as directed.Note:- Liquid water proofing admixture shall be measured and paid separately. |
| 4 | M & L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces over setting coat 5mm thick in CM 1:2 as in chajja/ ceiling surfaces and finished even and smooth with out using extra cement including scaffolding arrangement complete all as specified and as directed. |
| 5 | Supply only liquid waterproofing admixture. |
| 6 | M & L for Preparing of new plastered surfaces of ceiling and applying three coat white wash complete all as specified and as directed. |
| 7 | M & L for Preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer with 3mm thick wall putty on internal surfaces of walls complete all as specified and as directed. |
| 8 | M & L for Preparation of new plastered surfaces and applying two coats of exterior weather proof paint over a coat primer white or tinted upto triple storey building including scaffolding arrangement on external surfaces of wall complete all as specified and as directed. |
| 9 | M & L for Preparation of new plastered surfaces and applying two coat of cement base paint over a coat of alkali resistant priming paint upto triple storey building including scaffolding arrangement on external surfaces of walls complete all as specified and as directed. |
| 10 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 11 | S & F Anodised aluminium snap grid frame work for false ceiling all as specified, Size of grid 605 x 605mm complete all as specified and as directed. |
| 12 | M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. |
| 13 | Taking down chowkats or frames with shutters (without taking off shutters from frames) n.exc 1.5 Sqm including making good disturbed surfaces complete all as specified and as directed. |
| 14 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but n.exc 4 Sqm each including making good disturbed surfaces complete all as specified and as directed. |
| 15 | Taking down shutters of any description n.exc 1 sqm each and removing to store complete all as specified and as directed. |
| 16 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and removing to store complete all as specified and as directed. |
| 17 | M & L Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for exc half brick but n.exc one brick thick walls complete all as specified and as directed. |
| 18 | S & F for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed complete all as specified and as directed. |
| 19 | S & F Second class hardwood rail and style 35mm thick, Factory Made shutters Plain framed (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering rail and stile as per IS: 1003 (Part I), kiln seasoned andsupplied and fitted to chowkats complete all as specified and as directed. |
| 20 | S & F Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats complete all as specified and as directed. |
| 21 | S & F Second class hardwood 30mm thick glazed and skeleton window/ vent shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkats complete all as specified and as directed. |
| 22 | S & F Solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per spcification &drawing.Note:-(i) Existing wall edges will have to be finished properly in cement plaster 1:4 including fixing of 6 Nos wooden plugs for catch door frame size n.exc 17Sqcm average sectional areas and 100mm long.(ii) Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side.(iii) PCC strip of section 5*5mm will have to be created at bottom including smooth finish in each door opening. |
| 23 | S & F Factory Made Solid PVC Moulded Door Shutter with particle core board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 24 | S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 25 | S & F Anodised Aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings such as roller, channel, locks/ handle complete all as specified and as directed. |
| 26 | Providing and fixing factory made uPVC area exc 1.0 sqm but n.exc 2.0 each white colour casement (Openable) window made of extruded (three/ two track sliding window any type) profiles with wall thickness of 2.3mm (+ – 0.2mm) Window profile with hollow section with multichamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners.Hardware:- [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose. |
| 27 | S & F 100mm size of mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed. |
| 28 | S & F 75mm size of mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed. |
| 29 | S & F Alumininum anodised barrel tower bolts of extruded section 200mm size complete all as specified and as directed. |
| 30 | S & F Alumininum anodised barrel tower bolts of extruded section 125mm size complete all as specified and as directed. |
| 31 | S & F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and as directed. |
| 32 | S & F Extruded aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and as directed. |
| 33 | S & F Extruded aluminium alloy handles, fabricated type, anodised 75mm long complete all as specified and as directed. |
| 34 | S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed Length of bolt 300mm complete all as specified and as directed. |
| 35 | M & L for preparing surfaces of new wood or wood based surfaces any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 37 | S & F framed work such as grills, gratings, etc., with ends of bars shouldered and or riveted, or forged into spikes framed guard bars barred iron doors ladders; framed balusters; walk ways railings framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 38 | M & L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 39 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 40 | S & F 12mm mesh Wire netting of galva nisedsteel wire, 1.40mm dia inrepairs complete all as specified and as directed. |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 42 | S & F Sheet glass, ordinary quality, 4mm thickness and glazing with oil putty or wooden beading in square n.exc. 0.5 Sqm each complete all as specified and as directed. |
| 43 | S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple on any type of door/ windows complete all as specified and as directed. |
| 44 | S & F in repairs 20mm laying of CPVC pipe & all fittings/ fixtures concealed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 45 | S & F in repairs 25mm laying of CPVC pipe & all fittings/ fixtures concealed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 46 | S & F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixing complete all as specified and as directed. |
| 47 | S & F vitreous china premium 1st quality Table Top wash hand basin/ Flat type of size 550 x 400 x 160mm complete all as specified and as directed.Make:- Cera (Campa) or equivalents from Hindware/ Jaquar as approved. |
| 48 | S & F in repair vitreous china premium 1st quality wash down water closet pan floor mounting (pedestal pattern/ EWC) with S/P trap snow white colour of size 520 x 360 x 390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl S & F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/ gel gasket etc., as recommended by manufacturer for fixing, packing and including and taking down existing of any description/ size complete all as specified and as directed.Note:- EWC with S trap will be provided only on G.F. and other remaining floors will be provided with P trap EWCs. Make:- Cera (CONVENTIONAL) or euivalent from Hindware/ Jaquar as approved. |
| 49 | S & F flushing cistern of Polymer PVC 10 ltr capacity with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc., and incl all necessary accessories like rag bolts/ gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/ size complete all as specified and as directed.Make:- Cera/ Hindware/ Jaquar |
| 50 | S & F Vitreous China premium quality urinal of size 330 x 300 x 450mm snow white colour, and connection to inlet and outlet pipe, and including S & F of all necessary accessories set like rag bolts/ gel gasket/ hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/ size complete all as specified and as directed.Make:- Hindware (Corto) or equivalent from Cera/ Jaquar as approved. |
| 51 | S & F in repairs Urinal spreader chorme finish for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and as directed.Make:- Cera, Hindware, Jaquar |
| 52 | S & F in repair overhead shower 200 x 200mm square shape with 450mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and as directed.Make:- Cera/ Jaquar/ Hindware. |
| 53 | S & F in repair 15mm fancy type chromium plated quarter turn angle cock/ valve with CP wall flange cast copper alloy screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and as directed. |
| 54 | S & F in repair Concealed Stop Cock quarter turn, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and as directed.Make:- Cera/ Jaquar/ Hindware. |
| 55 | S & F in repair 15mm fancy type chromium plated quarter turn bib tap of long body with CP wall flange cast copper alloy with crutch or butterfly handles screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and as directed. |
| 56 | S & F in repairs 15mm 2-in-1 tap,chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 57 | S & F in repairs pillar taps long body 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 58 | S & F in repairs Push button tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm-75gms) complete all as specified and as directed. |
| 59 | S & F PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 60 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.Make:- Parry ware Cat No .T9937A1 or equivalent. |
| 61 | S & F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device complete all as specified and as directed. |
| 62 | Dismantling water tanks of 1000 ltr capacity and removing to store |
| 63 | S & F Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) 100 ltrs capacity of white colour hoisted and fixed in position all as specified in SSR Part I |
| 64 | S & F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.(Minimum weight 25mm-455gms) |
| 65 | S & F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 66 | S & F Corner glass Shelves (with brackets) and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) fixed in repairs complete all as specified and as directed.Make:- Jaquar (Cat No-CAN-1173 or equivalent) . |
| 67 | S & F Bath rooom PVC cabinet mirror of size 350mm x 450mm fixed in repairs complete all as specified and as directed.(Make:- Prayag Cat part No 551 or equivalent) |
| 68 | S & F 5mm thick looking mirror fixed to wall with stainless steel plugs/ connecter/ spacers/ screws etc., chrome finish without any beading, including ends/ edges of the mirror to be tapered etched smooth finish etc., fixed in position complete all as specified and as directed. |
| 69 | S & F in repairs sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 70 | S & F for 0.8mm thick stainless steel plate rack size 0.90 x 0.60m fixed in repairs with steel screws complete all as specified and as directed. |
| 71 | M & L for 18/ 19mm Pre laminated particle boards, interior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed in repairs with screws to timber work for Cup Boards complete all as specified and as directed. |
| 72 | M & L for 6mm thick external teak wood lipping fixed to18/ 19mm thick particle boards with nails complete all as specified and as directed. |
| 73 | S & F continuous (piano) hinge mild steel, bright finish or electro galvanised width of flaps 40mm (when open) complete all as specified and as directed. |
| 74 | S & F 75 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 75 | S & F Aluminium anodised Hasp and staple, safety type of size 75mm complete all as specified and as directed. |
| 76 | S & F in repairs 25mm dia stainless steel decorative fancy type curtain rods complete all as specified and as directed. |
| 77 | S & F stainless steel decorative fancy type end bracket and knob for 25mm curtain rods complete all as specified and as directed. |
| 78 | S & F cast iron door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed. |
| 79 | M & L for brass mortice lock, vertical type, 2 lever of size 100mm fixed in repairs complete all as specified and as directed. |
| 80 | S & F in repairs 150mm double action spring hinges for door shutters, mild steel with steel wire spring, stove enamelled, black complete all as specified and as directed. |
| 81 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and as directed. |
| 82 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 83 | M & L for providing 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and as directed. |
| 84 | M & L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x 250 x 7mm/ 450x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl cement screed 10mm thick in CM 1:3 complete all as specified and as directed. |
| 85 | M & L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 86 | M & L for non-skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 87 | M & L for Dark shade and Anti-skid vetrified joint free premium quality coloured tiles 600 x 600mm and 9-10mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc., over & including 15mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.Make:- Kajaria/ Somany/ Orient/ RAK/ NITCO. |
| 88 | M & L for Polished Glazed Vitrified Tiles (PGVT) joint free premium quality coloured tiles 600 x 1200 mm and 8-10mm thick, as in skirting/ dado etc. laid with 3-5mm spacers and grooves shall be filled with epoxy grout (Pidilite or equivalent) of approved matching colour. in any pattern of light & dark tiles as approved, laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) as per manufacturer's instructions and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved), in floors etc. over & including 10 mm thick screed in cement mortar (1:4) over complete all as specified and as directed.Make:- Orient or equivalent from Kajaria/ Somany/ RAK/ NITCO/ JohnsonNote:- The rates for labour and material for spacers/ grovers shall be deemed to be included in the quoted unit rates and nothing shall not be measured & paid separately on this account. |
| 89 | Demolition Stone slabs and tiles laid bedded and pointed in any mortar of anydescription or thickness in floors, aprons etc., complete all as specified and as directed. |
| 90 | M & L for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 91 | All as per item no.90 here in before, but in risers of steps, skirting etc., complete all as specified and as directed. |
| 92 | M & L for Marble work 18 to 20mm thick Abu plain/ Makrana doogri/ Makrana Adanga/ Green Marble/ Black Marble for any type (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and the like CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble Makrana white over 15 mm thick screed bed in CM 1:4 and providing edge moulding complete all as specified and as directed. |
| 93 | Dismantling Single layer Mangalore pattern orsimilar tiles in roofing |
| 94 | M & L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed. |
| 95 | M & L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed. |
| 96 | Removing the existing roof treatment of any description completely and removel of all the debris from site and rubbish off the premises complete all as specified and as directed. |
| 97 | M & L cement Sceed bed 20mm thick in CM 1:4 with using waterproofing liquid as per manufacturers instructions complete all as specified and as directed.(WPC Measured and paid separately) |
| 98 | M & L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.80 Kg/ Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/ Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions. The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures:- IWL India Ltd/ SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/ STP.Note:- The work shall be carried out be authorised applicators of manufactures. |
| 99 | Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. |
| 100 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 101 | S & F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/ wall complete all as specified and as directed. |
| 102 | S & F PVC (SWR) bend 110mm bore complete all as specified and as directed. |
| 103 | S & F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/ wall complete all as specified and as directed. |
| 104 | S & F PVC (SWR) bends 75mm bore complete all as specified and as directed. |
| 105 | S & F PVC (SWR) floor trap plain 75mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed. |
| 106 | S & F PVC (SWR) vent cowl 110mm complete all as specified and as directed. |
| 107 | Demolition of unreinforced Concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) and disposed off from site complete all as specified and as directed. |
| 108 | M & L 75mm thick cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving, finished even & smooth without using extra cement complete all as specified and as directed. |
| 109 | Taking down the unserviceable point wiring of lights, fans, scokets complete including switches, switch sockets outlets, fan regulators, lamp holder, ceiling rose, etc excluding light fittings and deposting where directed and making good the disturbed surfaces to match with the existing surface complete all as specified and as directed. |
| 110 | Taking down the existing unserviceable MCB DB alongwith MCBs of any type and capacity and depositing where directed and making good the disturbed surface to match with the existing surface complete all as specified and as directed. |
| 111 | M & L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLSH 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories or casing capping including accessories fixed on wall/ ceiling or concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting n.exc 10cm girth, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed:- |
| 112 | One light point controlled by one switch |
| 113 | One fan point controlled by one switch and one regulator |
| 114 | One 3 pin 5 Amps switch socket on independent board |
| 115 | One 3 pin 5 amps switch socket on same board alongwith other switches. |
| 116 | One bell point controlled by bell push switch on independent board. |
| 117 | All as per item No.111 here in before but with 2.5 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board complete all as specified and as directed. |
| 118 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 10 sqmm including one run of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25mm dia rigid PVC conduit and conduit accessories or casing capping including accessories fixed on wall/ ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed. |
| 119 | All as per item No.112 here in before but with 2 runs of 6 Sqmm and one run of 1 x 6 sqmm earth wire in PVC conduit as specified and as directed. |
| 120 | All as per item No.112 here in before but with 2 runs of 4 Sqmm and one run of 1 x 4 sqmm earth wire in PVC conduit as specified and as directed. |
| 121 | All as per item No.112 here in before but with 2 x 2 .5 sqmm + 1 x 2.5 sqmm earth wire in PVC conduit or casing capping as specified and as directed. |
| 122 | All as per item No.112 herein above but with 2 x 1.5 sqmm + 1 x 1.5 sqmm earth wire in PVC conduit or casing capping as specified and as directed. |
| 123 | All as per item No.112 here in before but with 4 runs of 10 sqmm and one run of 2 x 10 sqmm earth wire in PVC conduit complete all as specified and as directed.Note for item Nos 112 to 117:- (a) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.(b) For concealed wiring wherever required cutting chases will be measured separately under relevant items. |
| 124 | S & F in repairs LED post top latern made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection complete all as specified and as directed.Make: - Bajaj Cat No BGCT 24 LED WW/ Crompton Greaves Cat No LBLA1-10-CDL or equivalent |
| 125 | S & F in repairs Ceiling rose surface Bakelite 65mm x 50mm two to three terminals complete all as specified and as directed. |
| 126 | S & F in repairs Switch piano flush type 5 amps single pole, one way, 240 Volts complete all as specified and as directed. |
| 127 | S & F in repairs Switch socket outlet 3 pin, 5 amp, flush type complete all as specified and as directed. |
| 128 | S & F in repairs Socket outlet 3 pin 5 Amps flush type complete all as specified and as directed. |
| 129 | S & F in repairs Bell push flush type 5 amps single pole 240 Volts complete all as specified and as directed. |
| 130 | S & F in repairs Buzzer, AC, 230 volts, single pole complete all as specified and as directed. |
| 131 | S & F in repairs Bell ding dong, AC, 230 volts, single pole complete all as specified and as directed. |
| 132 | S & F in repairs Bell Musical type complete all as specified and as directed. |
| 133 | S & F in repairs Socket outlet 3 pin 15 amps flush type complete all as specified and as directed. |
| 134 | S & F in repairs Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch complete all as specified and as directed. |
| 135 | S & F in repairs stepped type electronic fan regulator flush type on the exiting phenolic laminated sheet extra as required complete all as specified and as directed. |
| 136 | S & F in repairs Modular Switch Roma flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.Make:- Anchor Roma |
| 137 | S & F in repairs Modular Switch Roma flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.Make:- Anchor Roma |
| 138 | S & F in repairs Modular Socket Roma flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.Make:- Anchor Roma |
| 139 | S & F in repairs Modular Socket Roma flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.Make:- Anchor Roma |
| 140 | S & F in repairs PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified and as directed. |
| 141 | S & F in repairs PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified and as directed. |
| 142 | S & F in repairs Lamp holder insulated body complete all as specified and as directed. |
| 143 | S & F in repairs Modular Fan step regulator, 120W - 1 module for ceiling Fan of 1200mm sweep complete all as specified and as directed. |
| 144 | S & F in repairs Modular white cover with plate with frame 2 module including suitable flush box matching with white cement work if necessary complete all as specified and as directed. |
| 145 | S & F in repairs Modular white cover with plate with frame 3 module including suitable flush box matching with white cement work if necessary complete all as specified and as directed. |
| 146 | S & F in repairs Modular white cover with plate with frame 4 module including suitable flush box matching with white cement work if necessary complete all as specified and as directed. |
| 147 | S & F in repairs Modular white cover with plate with frame 6 module including suitable flush box matching with white cement work if necessary complete all as specified and as directed. |
| 148 | S & F in repairs Modular white cover with plate with frame 8 module including suitable flush box matching with white cement work if necessary complete all as specified and as directed. |
| 149 | S & F in repairs Modular white cover with plate with frame 12 module including suitable flush box matching with white cement work if necessary complete all as specified and as directed. |
| 150 | S & F in repairs Modular white cover with plate with frame 16 module including suitable flush box matching with white cement work if necessary complete all as specified and as directed. |
| 151 | S & F replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps complete all as specified and as directed. |
| 152 | S & F in repairs MCCB Distribution board, TP&N, vertical, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 4 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory complete all as specified and as directed.Make:- C&S/ Legrand/ ABB. |
| 153 | S & F in repairs MCCB Distribution board, TP&N, vertical, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 4 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory complete all as specified and as directed.Make:- C&S/ Legrand/ ABB. |
| 154 | S & F in repairs MCCB four pole, 415 Volt, 63 Amps, 16 KA, adjustable thermal & fixed magnetic setting complete all as specified and as directed.Make:- Havells/ L&T/ Legrand/ ABB. |
| 155 | S & F in repairs MCCB four pole, 415 Volt, 100 Amps, 16 KA, adjustable thermal & fixed magnetic setting complete all as specified and as directed.Make:- Havells/ L&T/ Legrand/ ABB. |
| 156 | S & F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.Make:- C&S/ Legrand/ ABB |
| 157 | S & F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.Make:- C&S/ Legrand/ ABB |
| 158 | S & F in repairs MCB Distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.Make:- C&S/ Legrand/ ABB. |
| 159 | S & F in repairs MCB Four pole 415 volts, 40 to 100 amps 'C' Curve 10 kA Capacity complete all as specified and as directed.Make:- Havells/ L&T/ Legrand/ ABB. |
| 160 | S & F in repairs MCB SPN, 240 Volts, 32 to 63 Amps, 10 kA rupturing capacity 'C' series complete all as specified and as directed including taking down old one.Make:- Havells/ L&T/ Legrand/ ABB |
| 161 | S & F in repairs MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and as directed including taking down old one.Make:- Havells/ L&T/ Legrand/ ABB |
| 162 | S & F in repairs 20W LED Engineering plastic batten with white acrylic cover sleek design & high effciency for wall & surface mounted applications lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed. |
| 163 | S & F in repairs 10W LED battens decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient complete all as specified and as directed.Make:- Havells Cat No LED Pride Plus LHEXACP5IN1W010/ Bajaj cat No BCLSB 10 WH or equivalent |
| 164 | S & F 30W bldg security light fitting including suitable GI bracket and clamps nuts etc with best in class design and robust heat sink alongwith class leading IP, and surge protections for long lasting performance including taking down old unsv light fitting complete all as specified and as directed.Make:- Havells Cat No LHETAVU7PA70030/ Bajaj Cat No BCLST 30W LED/ Crompton Greaves Astra Neo Cat No LSTS-30-CDL/NL-M |
| 165 | S & F wall mounting opel glass 9W LED lamp B22 base including taking down old unsv light fitting complete all as specified and as directed. |
| 166 | Supply and laying in repairs of 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 4sqmm nominal cross section in service connections. |
| 167 | Supply and laying in repairs of 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 6sqmm nominal cross section in service connections. |
| 168 | Dismantling the following types of fans of any make/ model/ sweep, removing the burnt out winding wires, rewinding with winding wires and insulation materials overhauling/ servicing, greasing/ lubricating, insulating electric leads, replacing cotter pins, bolts nuts, replacing unserviceable bearing, bushes assembling back checking for proper fixing and safety and testing complete all as specified and as directed for :- |
| 169 | (a) ceiling fan upto 1400 mm (56\\") sweep. |
| 170 | (b) Exhaust fan upto 450mm sweep. |
| 171 | (c) Wall mounting/pedastal fan/air circulator upto 600mm sweep. |
| 172 | Removing following unserviceable parts/ items, S & F new items/parts of same specification existing and as described below for ceiling/ exhaust/ pedestal fans etc., complete all as specified and as directed. |
| 173 | (a) Ball bearing for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep. |
| 174 | (b) Bush bearing for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep. |
| 175 | (c) Fan condenser capacitor 2.5 mfd. |
| 176 | (d) Fan clamp for ceiling fan complete with rubber shackle, shackle bolt, nut, cotter pin, clamp complete. |
| 177 | Taking Down and Refixing including Painting of water heaters (Geysers) of following capacity of any make/model in site with synthetic enamel paint by brush including filling of cavaties with fillers one coat after cleaning all dust etc including writing MES numbers etc., complete all as specified and as directed. |
| 178 | Thermostat suitable for water heater upto 50 liters capacity. |
| 179 | Heating element upto 1.5 KW/ 2 KW suitable size |
| 180 | Indicator lamp any type suitable for water heaters upto 50 liters capacity. |
| 181 | Non return valve 15mm dia size. |
| 182 | PVC connections with brass check nuts 15mm dia x 45cm long for hot water supply and cold water supply. |
| 183 | Plug top 3 pin 15 amps. |
| 184 | Rubber gasket flat/'O' ring type suitable for water heater |
| 185 | PVC cable 3 core flexible copper conductor cable of size 40/0.193 |
| 186 | Pressure release Valve suitable for geysers upto 50 liters capacity. |
| 187 | S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. |
| 188 | S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed. |
| 189 | S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and as directed. |
| 190 | Excavating in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation of stays & Poles, laying of cables etc., and getting out in soft/ loose soil all as specified and directed. |
| 191 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm using excavated soil complete all as specified and as directed. |
| 192 | Removing excavated material/ surplus soil n.exc 50 metres and depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and as directed. |
| 193 | Supply, lay/ spread in trenches, sieving sand including cleaning, spreading, leveling, punning for laying/ cushioning of cable complete all as specified and as directed.Note:- Punned thickness shall be measured and paid. |
| 194 | Supply & laying 110mm HDPE pipe IS:4984:2016, 8 Kg/cm2 heavy grade PE-80 for cable protection complete all as specified and as directed. |
| 195 | Supply & laying 63mm HDPE pipe IS:4984:2016, 8 Kg/ cm2 heavy grade PE-80 for cable protection complete all as specified and as directed. |
| 196 | M & L for Cement concrete Type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete including form work complete all as specified and as directed. |
| 197 | Disconnecting and taking out the old unserviceable LT UG cable in trenches,wall & poles and taken as credit including supply and Laying in trenches/ poles/ wall etc LT UG Cable XLPE insulated, armoured, heavy duty with multistranded aluminium conductor, 1100 volts grade conforming to IS specifications and of the following sizes:-Note:- Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used wherever required while connecting cables to the panel board. Earth work such as excavation, refilling etc, shall be measured and paid separately under relevant item:- |
| 198 | (a) LT UG cable 4 core 10 sqmm |
| 199 | (b) LT UG cable 4 core 25 sqmm |
| 200 | (b) LT UG cable 3.5 core 50 sqmm |
| 201 | S & F Straight through joints (epoxy) heat shrink type for underground cable including joint kits and labour complete for making joints suitable for LT PVC sheathed/ armoured heavy duty cables with aluminium conductor of following sizes :- |
| 202 | (a) LT UG cable upto 4 core 16 Sqmm |
| 203 | (b) LT UG cable 3.5/4 core 25 sqmm to 50 sqmm |
| 204 | Taking down the old unserviceable junction box and taken as credit including S & F Junction box PVC (FRP) Junction Boxes weather proof type with hinged type door off white colour of size 280 x 145 x 100mm with three pole connector and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts with 6A MCB and fixing arrangements complete all as specified and as directed.Make:- Sintex or equivalent. |
| 205 | M & L for removing the existing street light fitting of any type & make and Supply & installation of new street light fittings, 70W LED 5700K New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaries with high power LED as light source in the existing pole duly wired complete all as specified and as directed. |
| 206 | S & F LED flood light 80 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 207 | Supply and laying 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 3 core 2.5 sqmm nominal cross section in service connections/street light connection from junction box to street light fittings complete all as specified and as directed. |
| 208 | S & F MCCB 4 pole 250 Amps,415 volts with rupturing capacity 25KA. All as specified including taking out old one complete all as specified and as directed. |
| 209 | S & F MCCB 4 pole 125 Amps,415 volts with rupturing capacity 16KA. All as specified including taking out old one complete all as specified and as directed. |
| 210 | Labour only for attending and identifying electric supply compaints no lights and day to day maintenace of existing switch board, DB's, LT Panels including connecting electrical accessories/ spares of elect supply installations, electrical fitting with lights, short circuits in any OTM/ Md accn/ Pump house as per complaint register complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 211 | Labour only for attending and identifying electric supply compaints no lights and day to day maintenace of existing switch board, DB's, LT Panels including connecting electrical accessories/ spares of elect supply installations, electrical fitting with lights, short circuits in any OTM/ Md accn/ Pump house as per complaint register complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender