Tender For Repair / Replacement Of Defective Parts, Pipe Insulation, Ducting System, Cooling Tower And Connected Items Of Central Ac Plant At Mh Area And Ssa Under Age E/M Of Ge Jaipur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Sep 2026
10 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Defective Parts, Pipe Insulation, Ducting System, Cooling Tower And Connected Items Of Central Ac Plant At Mh Area And Ssa Under Age E/M Of Ge Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair of thermostatic expansion valve suitable for R22 refrigerant, complete with sensing bulb, equalizer line, orifice assembly, including brazing with silver alloy, nitrogen purging during brazing, insulation of bulb and suction line with nitrile rubber, leak testing, evacuation, gas charging, and commissioning including taking down old one complete all as specified and directed. |
| 2 | S&F in repair of replaceable core type filter drier suitable for refrigerant circuit, refrigerant recovery, core replacement, nitrogen flushing, brazing, vacuuming, recharging of refrigerant, and testing including dismantling of old unit complete all as specified and directed. |
| 3 | S&F in repair of dual pressure control switch (HP/LP cut-out) suitable for chiller application, including capillary connection, wiring with control panel, calibration of set points, functional testing, and commissioning including taking down old complete all as specified and directed. |
| 4 | S&F in repair NTC type temperature sensor suitable for chilled water line, including removal of defective sensor, installation in thermowell, wiring to controller, calibration, testing, and commissioning incl taking down complete all as specified and directed. |
| 5 | Supply and fix in replacement of compressor oil filter, including draining of oil if required, removal of old filter, installation of new filter, oil topping, leak testing, and commissioning incl taking down complete all as specified and directed. |
| 6 | S&F in repair of control PCB/microprocessor controller compatible with Voltas chiller, including software configuration, parameter setting, wiring, integration with sensors and actuators, testing and commissioning incl taking down complete all as specified and directed. |
| 7 | S&F in repair of compressor crankcase heater suitable for oil sump heating, including mounting, electrical wiring, insulation, testing of heater operation, and commissioning incl taking down complete all as specified and directed. |
| 8 | S&F in repair of paddle type / electronic flow switch for chilled water line, including installation on pipeline, wiring to control panel, calibration, testing of flow interlock, and commissioning incl taking down complete all as specified and directed. |
| 9 | S&F in repair of pressure gauges for high side and low side, including siphon, isolation valves, mounting, leak proof connections, testing and commissioning incl taking down complete all as specified and directed. |
| 10 | Supply and charging of R22 refrigerant gas, including recovery of existing gas, leak testing with nitrogen, evacuation up to 500 microns, charging, pressure stabilization, and performance testing complete all as specified and directed. |
| 11 | S&F of refrigerant piping modifications using copper tubes (Type L) including fittings, cutting, bending, silver brazing under nitrogen purging, nitrogen pressure testing, insulation with nitrile rubber (min 19mm thick), supports and finishing, complete all as specified and directed. |
| 12 | Supply & fixing of compressor motor protection module (MPM) microprocessor based suitable for above compressor, providing overload, phase failure, reverse phase, voltage imbalance and thermal protection, including mounting in panel, wiring with copper conductor, integration with starter circuit, calibration and testing incl taking down complete all as specified and directed. |
| 13 | S&F in repair of oil separator assembly suitable for refrigerant discharge line, complete with float mechanism and oil return system, including brazing with silver alloy under nitrogen purging, alignment, pressure testing, leak rectification and commissioning, complete all as specified and directed. |
| 14 | S&F in repair of anti-vibration mounting pads / spring isolators under compressor base frame including proper placement, leveling, load distribution and vibration testing, complete all as specified and directed. |
| 15 | Supply and charging of compressor lubricating oil (POE/Mineral Oil) suitable for existing refrigeration system, including recovery and draining of old compressor oil, flushing of oil circuit wherever required, supplying and charging fresh approved compressor oil of suitable grade, checking oil level, oil return and lubrication system, replacement of oil filter (if required), leak checking, testing, commissioning and trial run of the complete refrigeration system, all as specified and directed by the Engineer-in-Charge. |
| 16 | Supply & fixing of electrical wiring, control cabling and integration with existing control panel including terminations, ferruling, testing complete all as specified and directed. |
| 17 | S&F in repairs 100 mm dia butterfly valve, handle operated type, CI/GM body, IS: 210 nitrile rubber lined, PN-1.6 rating, flanged ends, including dismantling of defective valve, cleaning of flanges, fixing with nuts/bolts, gaskets, alignment, tightening, hydraulic testing and commissioning complete all as specified and directed |
| 18 | ,---ditto--- all as per item No 17 above but 80 mm dia valve complete all as specified and directed. |
| 19 | ,---ditto--- all as per item No 17 above but 65 mm dia valve complete all as specified and directed. |
| 20 | ,---ditto--- all as per item No 17 above but 50 mm dia valve complete all as specified and directed. |
| 21 | ,---ditto--- all as per item No 17 above but 40 mm dia valve complete all as specified and directed. |
| 22 | S&F in repair 100 mm dia balancing valves having FG 220 cast iron body, confirming to IS 210, with hand wheel, lock shield, flow measurement ports, fixing, calibration, testing and commissioning incl taking down old complete all as specified and directed |
| 23 | ,---ditto--- all as per item No 22 above but 80 mm dia valve complete all as specified and directed. |
| 24 | ,---ditto--- all as per item No 22 above but 65 mm dia valve complete all as specified and directed. |
| 25 | S&F in repair 100mm dia cast steel 'Y' type strainer confirming to ASTM A-216 Grade, PN-20 rating, with SS screen, flanged ends, cleaning of pipeline, fixing, tightening, pressure testing including taking down old complete all as specified and directed |
| 26 | ,---ditto--- all as per item No 25 above but 80 mm dia valve complete all as specified and directed. |
| 27 | ,---ditto--- all as per item No 25 above but 65 mm dia valve complete all as specified and directed. |
| 28 | S&F in repairs 80mm dia check valves(NRV) of chiller system, conforming to IS 210, FG 200, cast iron body, flanged type, including dismantling, fixing, alignment, leak testing and commissioning complete all as specified and directed |
| 29 | ,---ditto--- all as per item No 28 above but 65 mm dia valve complete all as specified and directed. |
| 30 | S&F in repair 3 way mixing motorised control valve of size 65 mm dia, cast iron body with necessary accessories for Air Handling Unit complete with actuator (modulating type), linkage, control wiring, thermostat, junction box, including dismantling, fixing, calibration, functional testing and commissioning complete all as specified and directed. |
| 31 | S&F in repairs digital thermometer, wall mounted type, with probe sensor, wiring, fixing on panel/wall, testing complete all as specified and directed. |
| 32 | S&F in repair of motorised fire damper (5 sqm) complete with MS damper, actuator, limit switches, control panel, wiring, interlocking with AHU system, testing for fire operation and commissioning complete all as specified and directed. |
| 33 | S&F in repairs water temperature gauge, dial type (10–50°C), including capillary, fittings, fixing in pipeline, testing complete all as specified and directed. |
| 34 | M&L for dismantling of old ducting of any type and shape including all accessories viz. Corner, Cleat, Carriage bolt, Gasket etc complete in all respect as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 35 | M&L for dismantling of old ducting of any type and shape including all accessories viz. Corner, Cleat, Carriage bolt, Gasket etc complete in all respect as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender