Tender For Dry-Docking Repair Works Of Wb Chembakam At Yard In Kochi During The Year 2026-27
Tender Value
20.09 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
12 days left
EMD
40400
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dry-Docking Repair Works Of Wb Chembakam At Yard In Kochi During The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Charges for Docking / un - docking or beaching / un -beaching of the vessel |
| 2 | Dock hire charges (No extra dock hire charges will be entertained) |
| 3 | Mooring Charges for before and after dry-dock as well as during afloat repair works |
| 4 | Charges for ultrasonic testing (UT Gauging) with the Authorized agency at underwater hull area and above water plates, onboard deck of the vessel properly. The copy of UT Gauge report shall be submitted to the office after completion of UT testing for the vessel immediately. |
| 5 | Chipping, scrapping, wire brushing, buffing, shot blasting etc of external hull plate from keel to water level of the vessel properly (initially clean with fresh water with jet). Painting of the area with 2 coat of marine epoxy, 2 coat of chlorinated rubber antifouling paint including labour and material Cost. |
| 6 | Surface preparation of entire deck (from water level to deck surface) and super structure including out fittings by chipping, scrapping, wire brushing, buffing, shot blasting etc properly such as onboard deck, anchor winch, anchor cables (after dismantling), air vent pipes, hand pumps, bollards, wheel house, top of galley, railings, hatches, wheel house doors, stern gear compartment inside (rear side of vessel) & other fittings etc including labour and material Cost |
| 7 | Painting of entire deck (from water level to deck surface) and super structure including out fittings such as onboard deck, anchor winch, air vent pipes, hand pumps, bollards, wheel house, top of galley, railings, hatches, wheel house doors, engine room inside (total sides, top & ladder etc), stern gear compartment inside (rear side of vessel), Anchor winches & other fittings etc with one coat of epoxy primer and 2 coats of epoxy marine quality enamel of existing colour properly. The exhaust pipe cladding shall be renewed with new one properly (both engines) including labour and material Cost. |
| 8 | Renewal of under and above water level hull and onboard deck steel plates (IS2062) of 5 / 6 mm thick of ship building quality after cropping and removal of the damaged plates by gas cutting without any damages to other fittings & also sections of underwater portion pipe to assed (to be done after getting ultrasonic test report and recommendation of Surveyor, Port Dept, Govt of Kerala) and also Re fabrication damaged anchor plate as per marine standard including labour and material cost |
| 9 | Dismantling of propellers Port & STBD sides (Make: Madras Marine industries, Dia:700 mm, Pitch:630 mm, P/D:0.9, No of blades:04, Type: Fixed pitch, no: 02), propeller shafts, checking the trueness of the shaft (Make: Madras Marine Industries, Dia:72 mm, Material: Stain less steel, no: 02), propellers, re-metalling, NDT testing,renewal of cut lash bushes etc. and re-fitting of the same along with propellers after balancing properly including labour charges. |
| 10 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 11 | Dismantling of rudder (Type:Plate type, Make: Startek shipyard Pvt Ltd,Chennai, Shaft: Dia.70 mm) and rudder stock, inspection of trueness, re-building of the same,NDT testing, making of new bushes, brackets etc. if any and re-fitting of the unit properly including labour charges. |
| 12 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 13 | Overhauling of sea suction, the other valves on bilge, fire hydrant valves, Fuel valves and cleaning of mud box fittted onboard properly including labour cost |
| 14 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 15 | Overhauling of both side main engine oil cooler and Gear Oil cooler including labour charges |
| 16 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 17 | Overhauling of both side main engine heat exchanger and Aux Engine heat exchanger including labour charges |
| 18 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 19 | Overhauling of Both side main engine starter and Aux Engine starter including labour charges |
| 20 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 21 | Overhauling of Both side main alternator and Aux Engine alternator including labour charges |
| 22 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 23 | Overhauling of Port side main engine Fuel Pump and Aux Engine Fuel Pump including labour charges and the calibration certificates of the fuel pumps should be submitted along with the bills. |
| 24 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 25 | Electrical rectification work includes re panelling (fitted in engine room) by checking all the connections in the pannel and renewal of all damaged wiring inside the engine control panels, junction boxes, and associated circuits s with new marine-grade wiring, including cable lugs, glands, ferrules, terminals, conduits, and other accessories wherever required and renewe the damaged wires, bulbs, voltage fluctuation while connecting to generator issue shall be rectified and also make fully functional in both shore connection while connecting generator and fire & Bilage alaram, damaged bulb and tubes shall be replaced and additional 6 nos LED lights to be fitted in engine room with connection with fittings as per requriment. charges including labour cost |
| 26 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 27 | Renewal of Sea water pump of Both main engines (as per sample / of same specefication) by making suitable modifications in the foundation including labourcharges and modification charges |
| 28 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 29 | Strengthening of side railings of onboard including engine room top, wheel house front etc, renewal of M.s Pipe with new ones at damagaed portions properly by welding etc including labour & material cost |
| 30 | Servicing of fire & bilage alaram (which is not working properly), the issue shall be rectified and renew all damaged wires inside wheel house and also repairing of solinoid switch in engine room and damaged gauages in engine room and wheelhouse including labour Cost. |
| 31 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 32 | Renewal of both side bilge pump pressure gauge, hoses and make good condition with new one including labour and material charges |
| 33 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 34 | Renewal of rubber beeding of 3 nos hatches, 2 Wheel house doors and 2 nos Engine rook sky light make water tight and chalk testing should be done for confirming no water leakage is their, the works includes labour and material charges |
| 35 | Re-writing of the vessel name and identification details in the existing typeface, design, size, and colour. The scope also includes marking the vessel name, registration number, and port of registry on all Life Saving Appliances (LSA) and Fire Fighting Appliances (FFA) with clear visibility, in accordance with KIV rules and applicable statutory requirements.The quoted price includes all labour, materials, equipment, and consumables required to complete the work. |
| 36 | Fitting of new wooden panellling (flywood of 12 mm) along with glass wool insulation in accomodation area including labour and material charges. |
| 37 | Renewal of damaged steel fender including labour and material charges |
| 38 | Truss working on top of engine room by renewal of existing damaged sheets with new on including labour and material charges |
| 39 | Renewal of the glass wool lagging for the silencer and exhaust piping of one (01) Auxiliary Engine and both (02) Main Engines by removing the damaged lagging, cutting and rewelding the exhaust pipe wherever required, and providing new glass wool insulation with suitable cladding/covering. The work shall include all necessary labour, materials, consumables, tools, cutting, welding, fitting, finishing, and other incidental works required to complete the job in all respects as per the existing arrangement and to the satisfaction of the IWAI Officals. |
| 40 | Dismantling of the engine room top cover and removal of both main engines, auxiliary engine, fire pump, and all associated accessories to facilitate the renewal of underwater hull plates beneath the engines, if found necessary during inspection. If required, the underwater hull plates beneath the engines shall be renewed. The work shall include safe handling, dismantling, lifting, storage, refitting, alignment, reconnection, testing, commissioning, and making all dismantled items fully operational after completion of the plate renewal. The rate shall be inclusive of all labour, materials, consumables, lifting equipment, tools, tackles, transportation within the yard, and all incidental charges required for the satisfactory completion of the work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender