Tender For Design, Procurement, Installation, Testing And Commissioning Of Secondary Cooling Water System In Block 103 & 105 At Inrpc Site.
Tender Value
15.18 Crore
Estimated cost
Bid Submission
04 Sep 2026
20 days left
EMD
25.18 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palghar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design, Procurement, Installation, Testing And Commissioning Of Secondary Cooling Water System In Block 103 & 105 At Inrpc Site.
BOQ
| Sl. No. | Item Description |
| 1 | Design, manufacture, factory testing, procurement, delivery, installation, site testing & comissioning of double suction horizontal split case with mechanical seal centrifugal pumps (Q - 360M3/hr, H - 60 MWC) suitable for raw water services along with motor suitable for soft starter, all other accessories for pump installation, one set of spares(Shaft & Sleeves-1 Set,Bearings-2 sets(Pump & Drive),Mechanical seal assembly-1 set,Gaskets-1 set), etc. as per tender technical specifications etc. |
| 2 | Design, manufacture, factory testing, procurement, delivery and installation, site testing & comissioning of FRP Cooling Tower Induced draft type for SCW- 1 (Cooling capacity -5.97×106 Kcal/Hr) inclusive of automatic chemical dosing system, fan, electrical motor suitable for DOL starter, structure and accessories, spares (Gear box-1 No. (If applicable ), Fan drive shaft assembly-1 set, Coupling rubber bushes-4 sets, Fan blade assembly-1 set, Fan bearings (gear box)-2 sets (If applicable), Motor bearings-2 sets, Set of Oil seals-2 sets. (If applicable),Spray nozzles (One cell requirement), Lube Oil for Gear Box 2 times of Fill Quantity), etc. as per approved drawings and tender technical specifications etc.Cooling tower is consisting of four(4) cells - (2 Operating x 2 Standby).Note: Cooling tower will be installed in the existing RCC basin. |
| 3 | Design, manufacture, factory testing, Procurement, delivery and installation, site testing & comissioning of double suction horizontal split case with mechanical seal centrifugal pumps (Q - 1000M3/hr, H - 55 MWC) suitable for raw water services along with motor suitable for VFD operation, all other accessories for pump installation, one set of spares(Shaft & Sleeves-1 Set,Bearings-2 sets(Pump & Drive),Mechanical seal assembly-1 set,Gaskets-1 set), etc. as per tender technical specifications etc. |
| 4 | Design, manufacture, factory testing, procurement, delivery and installation, site testing & comissioning of FRP Cooling Tower Induced Draft type for SCW- 2 (Total Cooling capacity -33.2×106 Kcal/Hr) inclusive of automatic chemical dosing system, fan, electrical motor suitable for VFD operation, structure and accessories, spares(Gear box-1 No. (If applicable ), Fan drive shaft assembly-1 set, Coupling rubber bushes-4 sets, Fan blade assembly-1 set, Fan bearings (gear box)-2 sets (If applicable), Motor bearings-2 sets, Set of Oil seals-2 sets. (If applicable),Spray nozzles (One cell requirement), Lube Oil for Gear Box 2 times of Fill Quantity), etc. as per approved drawings and tender technical specifications. Cooling tower is consisting of ten (10) cells - (8 Operating x 2 Standby). Note: Cooling tower will be installed in the existing RCC basin. |
| 5 | SS Piping: Preparation of GA drawings, isometric drawing, taking delivery from stores (pipe as FIM), handling, transportation, cleaning, pickling and passivation, cutting, bending, welding and erection of S.S. pipes, pipe-fittings, valves, with supports including hydro/ pneumatic testing. The rate shall include supply and fabrication of pipe fittings, valves, structural material for pipe supports as per approved drawings, liquid penetrant examination of weld joints, TIG welding of SS pipes, consumables, testing of materials, and local passivation as per technical specification etc. |
| 6 | CS Piping Erection: Erection/ fabrication of carbon steel piping including valves, strainer, fittings along with its supports, clamps, etc. Job involves study of piping GA drawing, identification of source & destination, taking site measurements, incorporating the required changes in GA drawings, preparation of isometrics drawings, preparation & approval of spool drawings, identification of all materials, supply of structural material for pipe supports as per approved drawings, installation of instruments nozzle complete handling, transportation, detergent washing, rinsing, marking, cutting of pipes, alignment, complete erection and welding of supports along with supply of consumables like electrodes etc., hydro/ pneumatic testing, painting etc as per technical specification. The rate shall include supply & installation of structural material, along with consumables for piping as per approved drawings, material testing, etc.Note: Pipe and pipe fittings will be provided from item no 9 to 12 of BOQ. |
| 7 | Pipe sizes ≤150 NB |
| 8 | Pipe sizes > 150 NB & ≤ 300 NB |
| 9 | Pipe sizes > 300 NB & ≤ 700 NB |
| 10 | CS pipe butt welding: Edge preparation, fit-up butt welding of carbon steel pipes & pipe/fittings using GTAW+SMAW welding along with supply of all consumables, liquid penetrant examination for root & final weld, cleaning of joints as per approved procedure and technical specification etc.Note: Pipe and pipe fittings will be provided from item no 9 to 12 |
| 11 | CS pipe fillet welding: Edge preparation, fit-up, fillet welding of carbon steel pipes & pipe/fittings using GTAW+SMAW welding along with supply of all consumables, liquid penetrant examination for root & final weld, cleaning of joints as per approved procedure and technical specification etc.Note: Pipe and pipe fittings will be provided from item no 9 to 12 |
| 12 | Manufacture, inspection, factory testing, procurement and delivery of ERW Carbon Steel Pipe as per IS 1239 Class C (standard thickness) or ASTM A 53 grade B Sch 40 to site as per approved procedure and technical specification etc. |
| 13 | 100NB |
| 14 | 150NB |
| 15 | Manufacture, inspection, factory testing, procurement and delivery of ERW Carbon Steel Pipe as per as per IS 3589 with minimum standard thickness of 6.3 mm or ASTM A 53 grade B Sch 40 to site as per approved procedure and technical specification etc. |
| 16 | 200NB |
| 17 | 250NB |
| 18 | 300NB |
| 19 | 350NB |
| 20 | 400NB |
| 21 | 700NB |
| 22 | Manufacture, inspection, factory testing, procurement and delivery of pipe fittings material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification etc. |
| 23 | Elbows |
| 24 | 100NB |
| 25 | 150NB |
| 26 | 200NB |
| 27 | 250NB |
| 28 | 300NB |
| 29 | 350NB |
| 30 | 400NB |
| 31 | 700NB |
| 32 | 150x150x50NB |
| 33 | 150x150x80NB |
| 34 | 150x150x150NB |
| 35 | 200x200x80NB |
| 36 | 250x250x100NB |
| 37 | 250x250x150NB |
| 38 | 250x250x200NB |
| 39 | 300x300x250NB |
| 40 | 300x300x300NB |
| 41 | 700x700x300NB |
| 42 | 700x700x350NB |
| 43 | 700x700x400NB |
| 44 | Concentric reducer (Size may change as per actual pump details) |
| 45 | 200X150NB |
| 46 | 350X300NB |
| 47 | Eccentric reducer (Size may change as per actual pump details) |
| 48 | 250X200NB |
| 49 | 400X350NB |
| 50 | Manufacture, inspection, factory testing, procurement and delivery of blind flanges along with companion flange: Material as per ASTM A 105 & dimension as per ASME B, 16.6 S.O. RF, 150 CL to site as per approved procedure and technical specification etc. |
| 51 | 150NB |
| 52 | 250NB |
| 53 | 300NB |
| 54 | 700NB |
| 55 | Design, preparation of detail drawing, manufacture, assembly, procurement, inspection, factory testing, packing, safe delivery and guarantee of double eccentric wafer type carbon steel butterfly valves of ANSI Cl # 150 rating manual, along with companion flanges, bolts, nuts & gaskets as per approved procedure and technical specification etc. |
| 56 | 100NB |
| 57 | 150NB |
| 58 | 200NB |
| 59 | 250NB |
| 60 | 300NB |
| 61 | 400NB |
| 62 | 700NB |
| 63 | Design, preparation of detail drawing, manufacture, assembly, procurement, inspection, factory testing, packing, safe delivery and guarantee of double eccentric wafer type carbon steel Butterfly valves of ANSI Cl # 150 rating with pneumatic actuators (double acting rotary type with manual override) along with companion flanges, limit switches, bolts, nuts & gaskets as per approved procedure and technical specification etc. |
| 64 | 150NB |
| 65 | 200NB |
| 66 | 350NB |
| 67 | Design, preparation of detail drawing, manufacture, assembly, procurement, inspection, factory testing, packing, safe delivery and guarantee of wafer type, double disc Non return valve(Body-ASTM A216 Gr. CF8/8M, Plate- ASTM A 351 Gr. CF8/8M) of ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets as per approved procedure and technical specification etc. |
| 68 | 200NB |
| 69 | 350NB |
| 70 | Design, preparation of detail drawing, manufacture, assembly, procurement, inspection, factory testing, packing, safe delivery and guarantee of Manual operated Globe valve (Body-ASTM A216 WCB, Stem-ASTM A 276 Gr. SS 316, Disc seat- ASTM A 351 Gr. CF8/8M) of ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets as per approved procedure and technical specification etc.. |
| 71 | 200NB |
| 72 | 250NB |
| 73 | 300NB |
| 74 | 350NB |
| 75 | Design, preparation of detail drawing, manufacture, assembly, procurement, inspection, factory testing, packing, safe delivery and guarantee of 2-piece, full bore, quarter turn ball valve(body-ASTMA 216 WCB, ball- ASTM A 351 CF 8/8M, seat and stem- ASTM A 276 Gr. SS 316) of ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets as per approved procedure and technical specification etc. |
| 76 | Design, preparation of detail drawing, manufacture, assembly,procurement, inspection, factory testing, packing, safe delivery and guarantee of Equilibrium (pilot operated) Float valve(body& cover-Cast iron as per IS 210Gr. FG200, float-copper, stem- brass rod) (horizontal and vertical mounting) of ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets as per approved procedure and technical specification etc. |
| 77 | 150NB |
| 78 | Design, preparation of detail drawing, manufacture, assembly, procurement, inspection, factory testing, packing, safe delivery and guarantee of SS316 meshed (mesh size 40) Pot Type Strainer of ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets as per approved procedure and technical specification etc. |
| 79 | 250NB |
| 80 | 400NB |
| 81 | Design, preparation of detail drawing, manufacture, assembly, procurement, inspection, factory testing, packing, safe delivery and guarantee of flow meter (orifice type) of ANSI Cl # 150 rating along with companion flanges, bolts, nuts & gaskets as per approved procedure and technical specification etc. |
| 82 | 300NB |
| 83 | 700NB |
| 84 | Design, detail engineering, manufacturing, factory testing, delivery, procurement, installation, site testing and commissioning of electrical systems and instruments (level switch, flowmeter , pH sensor etc.) of entire SCW-I & SCW-II system (including 4 nos. of MCC panels, LPBS, cables, cable tray, earthing and other components required for integration of the SCW systems in totality as per tender technical specification, approved documents and drwaings etc .Note: Entire electrical & instrumentation component/system/ items (except motors for pumps & fans ) are covered in this item. Pump motors & fan motors are covered in their respective item i.e. in item no. 1 to 4. |
| 85 | Procurement, Supply drilling and erection of reputed make GI Coated Anchor fasteners as per standard specifications (Size M12 x minimum length 150mm, as per code NQA-1) |
| 86 | Procurement, supply, fabrication and installation of MS plate E.P. (200mm x 200 mm x minimum 12 mm thk.) using anchor fasteners (supplied in item no. 22) wherever E.Ps are not available at site. |
| 87 | Functional testing & commissioning of entire SCW-I & SCW-II Systems of Block 103 as per tender technical specification and approved procedure etc. |
| 88 | Design, manufacture, factory testing, procurement, delivery, installation of end suction centrifugal pumps (Q - 95 M3/hr, H - 47 MWC) for Block 105 with mechanical seal suitable for raw water service along with motor, all other accessories for pump installation, spares (Shaft & Sleeves-1 Set, Bearings-2 sets(Pump & Drive), Mechanical seal assembly-1 set, Gaskets-1 set etc.) as per approved drawings and technical specification etc. |
| 89 | Design, Manufacture, factory testing, procurement, delivery and installation of FRP Cooling Tower Induced Draft type (Cooling capacity 0.75×106 Kcal/hr) for Block 105 inclusive of automatic chemical dosing system, fans, electrical motors, structure and accessories, spares(Gear box-1 No. (If applicable ), Fan drive shaft assembly-1 set, Coupling rubber bushes-4 sets, Fan blade assembly-1 set, Fan bearings (gear box)-2 sets (If applicable), Motor bearings-2 sets, Set of Oil seals-2 sets. (If applicable),Spray nozzles (One cell requirement), Lube Oil for Gear Box 2 times of Fill Quantity ), etc. as per approved drawings and technical specification etc.Note: Cooling tower will be installed in the existing RCC basin. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender