Tender For Development Of Open Space Near Presidents House, Patrapada.
Tender Value
93.39 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
93396
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Open Space Near Presidents House, Patrapada.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of all kinds of soil in foundation trenches or drains (not exceeding 1.5 m in width od 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift up to 1.5m, including taking out the excavated soil and disposal of surplus excavated soil, with all lead and lift, etc. all complete as per the direction of Engineer-in-Charge. |
| 2 | Stony Earth |
| 3 | Hard Rock |
| 4 | Filling Foundation and plinth with avelable excavated Earth including leveling and watering, all labour and matrials complete. |
| 5 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. (Measurement will be taken on finished compacted section only) |
| 6 | Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period including all cost of labour, material, conveyance, royalties and taxes, sundries ,T & P etc.complete as per the directions of Engineer-in-charge. |
| 7 | First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 8 | First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 9 | First class Decorative Brick Labour masonry work using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all labour, scaffolding, sundries, T&P required for the works etc.(Excluding Brick) complete in all respect as directed by the Engineer-In-Charge. |
| 10 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. Footing Base & Short Column |
| 11 | Plinth Beam |
| 12 | Lintel |
| 13 | Column |
| 14 | Roof Beam |
| 15 | Roof Slab |
| 16 | Providing, fixing and placing of Fe-500/ Tor steel (HYSD) for RCC work in lintel of required diameter of TATA/SAIL/VIZAG with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost |
| 17 | Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners, etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 18 | Providing 16mm thick cement plaster with cement mortar of (1:6) to the brick surface including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc. complete as per direction of the Engineer-in-charge |
| 19 | Providing 6mm thick cement plaster in all floors at all height with cement mortar of mix (1:4) to RCC surface finished smooth including deep chipping and slurry treatment with screened and washed sharp sand for mortar and finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners, etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.Ground Floor |
| 20 | Decorative cement plaster of Labour work thick 16-20mm plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 21 | Finishing outside wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T & P etc complete as per direction of Engineer-in-charge. |
| 22 | Painting to external surface of building with two coats of weather coat over a coat of water based primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 23 | Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply). |
| 24 | Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete. |
| 25 | Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor at all floors and all heights.Podium Slab |
| 26 | Supplying & Fixing of Pre Cast Kerb Stone of Size 600X300X150mm of M-30 Grade of approved Make, Design, Colour and Size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.(Excavation, PCC, Sand Filling , Concrete Backing & For Morte joint Filling Paid Extra)Beloe kerb stone |
| 27 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.Filed Area |
| 28 | Supply, Filling, Spreading of Good earth, Garden Soil including cost of material, carriage, labour and cost of application. grass area |
| 29 | Development of lawn :-Mexican grass ii)Providing and laying Neelgiri /Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 30 | Ficus black vivion piller Topiary (Cylinder type) well developed with fresh & healthy 180 cm to 210 cm ht in 40 cm Cement Pot/Plastic pot. |
| 31 | Topiary plant of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 cm to 75 cm spread each Ball, 135 cm to 150 cm ht. plant, in 35 cm Cement Tray /Cement Pot/ Plastic pot. |
| 32 | Tecoma capensis of ht 30-40 cm, healthy, well developed in Poly Bag. |
| 33 | Ixora singaporensis different colour having 30 cm and above ht., well developed with fresh & healthy foliage with bloom in 25 cm Earthen Pot/Plastic Pot. |
| 34 | Ixora dwarf different colour having 10 cm to 15 cm ht., well developed with fresh & healthy foliage with bloom in 15 cm Earthen Pot/Plastic Pot. |
| 35 | Excoecaria bicolor of height 45-60 cm. in earthen pot of size 20 cm |
| 36 | Plumeria rubara height 120-150 cm., 3-4 branches and thick stem in big size HDPE bag |
| 37 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with storng vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 75mm thick sand filling.as per drawing, specification and direction of Engineer-In-charge. |
| 38 | Providing and fixing 20mm thick Exterior Decorative Stone flooring (Use of Stone - Granite, Marble & Khandolite Stone for Decorative Flooring design should be approved by Engineer-In-Charge) for Floor and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge at all floors and all heights. |
| 39 | Finishing walls with textured exterior grade paint at all height to wall surface Royal/Rivera/ Duracast of Asian paints or equivalent of required shade as per the instructions of the manufacturers giving uniform shade etc .including providing scaffolding,cleaning,curing & supply of all matrials and labour complete as per drawing, design and direction of Architect/Engineer-in-charge. |
| 40 | Providing and fixing of Name letter Signage with approve language - Oriya, Hindi & English of approved Letter size,Pattern/Design, Colour & hardware fittings complete with all respect etc. as per design/drawing & instruction of Architect/Engineer-In-Charge. |
| 41 | Morden White Marble Garden Bench |
| 42 | Morden Marble Garden Bench |
| 43 | Granite Garden Bench Round Shape |
| 44 | Two seated Sea saw |
| 45 | Twin Arch swing |
| 46 | Ladder & Slide |
| 47 | Still Dustbin |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge(32 mm dia) |
| 49 | 25mm dia |
| 50 | 20mm dia |
| 51 | Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. 32mm dia CPVC ball valve |
| 52 | 25mm dia CPVC ball valve |
| 53 | Supplying all labour , T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & fitting in grooves , testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of the machine , conveyance etc all complete as per the direction of Engineer-in-charge.15mm to 32mm dia pipe |
| 54 | Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC(In all floor)20mm to 50mm PVC to pass in 125mm to 250mm thick Brick/stone wall |
| 55 | Supplying all materials , labour T&P and cutting hole in RCC floors,roofs,etc for passing PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the EIC20mm to 50mm PVC to pass in 125mm to 250mm thk RCC |
| 56 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent.Water Closet Complete set - HINDWARE -20100+21054/ Equivalent |
| 57 | Providing and fixing of following size Wash Basin with 175mm Long Wall Connection Pipe including painting of fittings and brackets, cutting and making good the walls wherever required with provision for pillar cock but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent.Under counter wash basin Complete set (HINDWARE LARA CODE NO.10095 Starwhite/ Equivalent), Bottle Trap - ( Jaquar cat no-ALD-769L300x190/Equivalent) , Waste Coupling -(Jaquar cat no-ALD-705/Equivalent) |
| 58 | Wash hand basin with porcelain pedestal(Hindware)-91049 |
| 59 | Providing and Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification. |
| 60 | Supplying all materials, labour, taxes, T & P for fitting & fixing of different water supply CP , Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge..2 Way Bib Cock With Wall Flange |
| 61 | Pillar Cock with lift type operating knob & Base Flange |
| 62 | Angular Stop Cock With Wall Flange |
| 63 | Towel Rail 600mm Long,- ACN-1111SM/ Equivalent |
| 64 | Towel Ring- ACN-1121BN/ Equivalent |
| 65 | Soap Dish Holder- JAQUAR ACN-1131N/ Equivalent |
| 66 | Soap Dispenser with Glass bottle (Jaquar AKP-35735P/Equivalent) |
| 67 | Toilet Roll Holder with stainless steel flap (Jaquar 35753PS/Equivalent) |
| 68 | Health Faucet (JAQUAR ALD-573 /Equivalent) |
| 69 | Glass Shelf ( Jaquar cat no-AKP-35771P/Equivalent) |
| 70 | CP Flanges |
| 71 | CP Grating with floor trap |
| 72 | 15mm dia CP extension piece- Astral T143-010M/ Equivalent |
| 73 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm dia UPVC pipe(Type-A) |
| 74 | Supply all materials ,labour,T&P,fitting and fixing UPVC SWR Type B pipes & fittings of approved make confirming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleats ,pipe clamps as per requirement including earthwork excavation & fitting ,including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/SUPREME/EQUIVALENT) 75mm dia UPVC SWR pipe(Type-B) |
| 75 | 110mm dia UPVC SWR pipe(Type-B) |
| 76 | 75mm dia U-PVC duble Plain Tee |
| 77 | 75mm dia U-PVC Plain bend |
| 78 | 110mm U-PVC Door bend |
| 79 | 110mm U-PVC door Tee |
| 80 | 110mm U-PVC plain Bend |
| 81 | 110mm U-PVC door Cross Tee |
| 82 | 110mm U-PVC Offset. |
| 83 | 110mm U-PVC 'P' trap |
| 84 | 110mm U-PVC vent cowl |
| 85 | 110mm pipe clip |
| 86 | Providing and fixing pvc gully trap compete with grating brick masonry chamber with water tight SFRC cover with frame of 300*300 mm size(inside)the weight of cover to be notless than 4.50kg and frame to be not less than 2.70kg as per standard design:100*100 mm size P type .including cost of all labours,material,conveyance,loading and unloading,all taxes and royalties,sundries and T&P etc all complete as per direction of the Engineer-in-change. With flyash bricks of minimum compressive strength 75 kg/sqcm (Size 300 x 300 x 300 mm) |
| 87 | Constructing brick masonary chamber for underground SFRC inspection chamber and bends with brick in cement mortar 1:4 (1 cement :4 coarse sand )SFRC cover with frame 455*610mm internal dimensions ,total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C TOP SLAB WITH 1:2:4mix(1 cement:2 coarse sad:4 graded stone aggregate 20mm nominal size ),foundation concrete 1:5:10(1 cement :5 fine sand :10 graded stone aggregate 40mm nominal size)insideplastering 12mm thick with cement mortar 1:3(i cement:3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc.compete as per standard design Including all cost of labour,material,T&P etc.all compete as per the engineer-in-charge.Inside dimensions 600*850mmand 45cm deep for pipe line with three or more inlets. |
| 88 | Supplying all materials, labour, T&P and fixing PVC water storage tanks of 2000 ltr capacity (shade white) confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including conveyance of all materials to worksite etc all complete as per specification and direction of Engineer-in-charge.2000 ltr capacity water storage tanks- |
| 89 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge |
| 90 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia |
| 91 | 20mm dia stand post 3mt interval |
| 92 | Septic tank |
| 93 | Bore Well |
| 94 | Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height. |
| 95 | First class Fly Ash Brick masonry using F.A. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement (PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 96 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.Plinth beam |
| 97 | Chajja |
| 98 | Lintel |
| 99 | Roof Slab |
| 100 | Supplying, fitting and fixing vitrified industrial floor tile 30x30cm premium grade 8 to 10 mm thick in floors of approved make confirming to IS : 4457 laid on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 101 | Providing and fixing Premium quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights. |
| 102 | Supplying , fitting and fixing of openable S.S doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 103 | Providing & Applying priming one coat with water based Cement primer of approved brand and manufacture on plastered surface including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge. |
| 104 | Painting to external surface of building with two coats of weather coat of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 105 | Providing & painting Two coats of Plastic Emusion paint with 1st quality oil bound washable distemper of approved brand and manufacturer to give an even shade as per the instruction of Engineer - In- Charge at all elevations including all material & labour complete. |
| 106 | Electrical Supply & fixing of 40Watt decorative post top fitting. |
| 107 | Supply and Fixing of decorative 3Mtr light post top pole with 1 no 10Amp DP MCB. |
| 108 | Providing and laying C.C (M-30) using 20mm size down graded crusher broken hard granite chips including the cost of centring and shuttering with cost of all labour, materials.T & P and taxes, royality etc complete in all respect as per the direction of Engineer-in-charge. |
| 109 | Supply and fixing of Coil earthing. |
| 110 | S&F of 8Watt LED Bollard. |
| 111 | Construction of foundation for bollard. |
| 112 | Recessed/surface wiring to light point/fan point/ Exhaust fan point with 1.5 Square mm FR PVC insulated single core multistranded copper conductor of ISI marked with 20mm dia. non-metallic PVC flexible conduit with 5 Amp, 25 on MS box having front bakelite cover of suitable size, MS box with 1.5 Sq.mm FR PVC insulated single core multistranded copper conductor as earth wire including all accessories and connection as per direction of Engineer-in-charge. Light point. |
| 113 | Fan Point |
| 114 | Supply and fixing of Ceiling Fan. |
| 115 | Supply and fixing of Exhaust Fan. |
| 116 | Supply and fixing of 10W LED bulk head fitting. |
| 117 | Supply and fixing of 20Watt LED Tube light. |
| 118 | Supply & fixing of lawn mower point. |
| 119 | Recessed submain wiring along with earth wire of PVC insulated single core multistandard copper ISI Marked conforming to IS 694/1990 in 20mm Dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC Conduit as required. 2 x 2.5Sqmm+ 1 x 1.5Sqmm |
| 120 | Supply and laying of 2x6mm2 Al.Ar. U.G cable. |
| 121 | Supply and laying of 4x16mm2 Al.Ar. U.G cable. |
| 122 | Supply and Laying of 40mm HDPE pipe for laying of Cable. |
| 123 | Cable trenching in all type of soil excepting rocky soil including excavation of earth, brick laying and filling of sand and loose earth to the original ground level with surface dressing after laying 1no 1.1 KVPVC insulated PVC sheathed armoured cable removal of surplus earth to a lead up to 5km. |
| 124 | Construction of pedastal for the panel in ash brick of size (900x450x600)mm. |
| 125 | S/F of Outdoor type double door plinth mounted panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete with following provisions.Incoming:-1. 63Amp 25KA 4P MCCB-1 NoOutgoing:-1.40Amp TPN MCCB-01 No. 2.32Amp DP MCB-2 Nos.3.200Amp copper bus bar.4. 0-100Amp Ammeter with selector switch-1Set 5. 0-500Volt Voltmeter with selector-1Set6. Indicator lamp-1Set. 7.Time switch with contactor complete set Size of panel board 36\\"x 24\\"x10\\" |
| 126 | S/F of 63Amp outdoor type double door plinth mounted panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete with following provisions.Incoming:-1. 63Amp DP MCB-1NoOutgoing:-1.40Amp DP MCB-01 No.2.32Amp DP MCB-02 Nos.3.200Amp copper bus bar.4. 0-100Amp Ammeter with selector switch-1Set 5. 0-500Volt Voltmeter with selector-1Set6. Indicator lamp-1Set. Size of panel board 30\\"x 24\\"x10\\" |
| 127 | Supply and fixing of standard earthing Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender