Tender For Exterior And Interior Repairing Of Office Building With Painting And Plumbing Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Sep 2026
22 days left
EMD
50000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Exterior And Interior Repairing Of Office Building With Painting And Plumbing Work
BOQ
| Sl. No. | Item Description |
| 1 | Exterior, Interior and Plumbing |
| 2 | Stripping off worn out plaster and raking out joints of walls, ceilings etc upto any height and in any floor including removing rubbish within a lead of 150m as directed. |
| 3 | Cleaning the exposed reinforcement preferably upto full diameter by wire brush, Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), Applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification. Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary at any height. With 1:5 cement mortar, 15mm thick plaster. |
| 4 | Applying Exterior Grade Acrylic primer of approved quality and brand (ICI Deluxe Weather Shield Alkali bloc or equivalent) on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC at any floor. One Coat applied @ 0.9 ltr/ 10 sqm. (Make: ICI/ Asian Paints/ Berger/ Nerolac) ( Including stair) |
| 5 | Protective and Decorative Acrylic exterior emulsion paint of approved quality and brand (ICI Deluxe Weather shield Max, Apex ultima of Asian paint, Barger Weather coat long life or equivalent), as per manufacturer's specification and as per direction of Engineer-In-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two or more coats applied @ 1.67 ltr/ 10 sqm with Super protective 100% Acrylic Emulsion paint. Rate is inclusive of applying additional coats wherever required to achieve even shade and colour. (Including Stair) |
| 6 | Priming one coat on MS or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint). Painting with best quality synthetic enamel paint of approved make and brand (ICI Deluxe 5 in 1 or Equivalent) including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. Two coats (with any shade except white) with super gloss (hi-gloss) of approved quality. Size :4 ft x3 ft |
| 7 | Priming one coat on timber with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint). Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. Two coats (with any shade except white) with super gloss (hi-gloss) of approved quality on timber |
| 8 | Dismantling and removing damaged rain water/drainage pipe line of approved make and providing and fixing new unplasticized PVC (uPVC) SWR pipes conforming to IS:13592 including all necessary fittings such as bends, tees, offsets, door tees, clamps, sockets, solvent cement, cutting and making good the walls/floors, testing for leakage, disposal of unserviceable materials and all labour, materials, tools and plants complete as per specifications and direction of Engineer-in-Charge. |
| 9 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground or as directed |
| 10 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary at any height. With 1:6 cement mortar, 15mm thick plaster |
| 11 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth all complete including removing of old/ dilapidated putty wherever necessary. |
| 12 | Applying priming coats (One or more coat) with water thinnable cement primer of approved brand and manufacture on wall surface, having low VOC (Volatile Organic Compound less than 50 grams/litre) content including scraping and preparing the surface thoroughly, removing of dust etc all complete as per manufacturer's specification and direction of the EIC (At any Floor). Make: Asian Paints/ ICI Dulux/ Berger. |
| 13 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture (Asian Paints Apcolite/ ICI Dulux Super Clean / Berger Easy clean), applying Two or more coats to achieve even shade and colour as per direction and satisfaction of EIC. |
| 14 | Painting with best quality synthetic enamel paint of approved make and brand (ICI Dulux 5 in 1 or Equivalent) including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. Two coats (with any shade except white) with super gloss (hi-gloss) of approved quality on steel or other metal surface including Stair railing |
| 15 | Proving and fixing in position clear glass as per existing for windows, glazing elements etc wherever directed including necessary hardware, fittings, fixtures etc complete as per existing, only wherever its broken before taking up the work as per directions of Engineer in charge, complete |
| 16 | Repairing windows (only shutters) if necessary, including removing the shutter and refixing them as before: a) removing the existing shutter carefully and replacing the broken wooden member & refixing the shutter as per original complete. Cu.m 1.0 b) removing the shutter carefully from the other intact hinge and replacing the damegaed/broken hinge and providing and fixing approved quality SS hinge 100 mm long complete removing existing non-functioning tower bolt and replacing it with new SS tower bolt 125 mm long or as per existing size with necessary SS screws complete. if windows are not closing properly, scrapping the excess wood and making the window smooth for opening/ closing complete. |
| 17 | Replacement of existing wooden window with two track powder coated aluminum windows in 20 gauge standard tubular sections of approved make having two glazed panels of appropriate size running on two separate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at itop, bottom and sides with required EPDM rubber/ neoprene gasket etc. Size: 4 ft by 3 ft. |
| 18 | Repairing of damaged PCC flooring by dismantling the existing broken and loose cement concrete floor, cleaning the surface, providing and laying Plain Cement Concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in required thickness, including leveling, finishing with neat cement, curing, disposal of dismantled materials, and all labour, materials, tools, plants, scaffolding and incidental charges complete as directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender