Tender For Renovation And Development Of Gurduwara Kutiya Sahab Deedar Pora Langate.
Tender Value
4.23 Crore
Estimated cost
Bid Submission
02 Sep 2026
0 days left
EMD
8.46 Lakhs
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Development Of Gurduwara Kutiya Sahab Deedar Pora Langate.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Experience Certificate | Other | 02-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | (Construction/Renovation of main hall of gurdawad sahib alongwith sukhasan sahib room and parkarma sahib way) |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. |
| 4 | Providing/laying dry stone soiling hand paked under foundation incl.all carriages |
| 5 | Demolishing cement concrete 1:3:6 manually/by mechanical means and dispoal of material within 50 mtrlead as per direction of Engineer Incharge. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 |
| 7 | Providing and laying heavy duty full body / double charge anti-skid vitrified floor tiles of approved make, colour, shade and size 16\\"×16\\" (minimum thickness 10–12 mm) in flooring over 20 mm thick cement mortar (1:4) bed including neat cement slurry, cutting, dressing, fitting around edges, grooves wherever required, filling joints with white cement mixed with matching pigment, curing, cleaning and finishing complete in all respects as directed by Engineer-in-Charge. |
| 8 | Providing and laying in position specified grade of reinforced cement concrete in 1:2:4 including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level |
| 9 | Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) in super structure upto fifth floor level |
| 10 | Providing and laying 15 mm thick Nano Matt Marble flooring of approved make, colour and shade over 20 mm thick cement mortar (1:4) bed, including cutting, dressing, edge moulding/chamfering, laying to proper line and level, filling joints with matching epoxy/marble grout, machine grinding, nano matt finishing, curing, cleaning, all materials, labour, tools & plants, carriage, complete as directed by the Engineer-in-Charge |
| 11 | 15.56 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 12 | 15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar) |
| 13 | Applying 2mm thick wall putty on wall surface for smooth finish (two or more coats) including head load & carriage |
| 14 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slop upto 150 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor 5 level excluding cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (1 cement: 1.5 coarse sand :3 graded crushed stone agg. 20 mm nominal size) Incl. all carriages of material involved. |
| 16 | Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete ( thermo- mechanically Treated bars ) . |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form work forColumns, piers, abutments, pillars, posts and struts |
| 18 | Structural Steel work welded in built up sections trusses and framed work including cutting hoisting welding & fixing in position and applying a priming coat of approved steel primer all complete. Including soffit & Eaves Bording of 2mm thick MS Sheet I/C priming coat and painting three or more coats. |
| 19 | Providing and fixing 0.50 mm thick colour CGI Sheets roofing fixed with self driven screws incl. cost of all materials and providing ridges hips of 60 cm over all width of plain precoated sheets fixed with self driven screws including cost of all materials |
| 20 | Providing and fixing 18 mm thick HDHMR wall panelling over 12 mm thick plywood backing including decorative beading design work, Decco Paint (Including premier) matt finish of approved shade and make with buffering, approved adhesive/Fevicol, nails, screws, fasteners, putty, sand paper, cutting, fitting, scaffolding, labour, wastage and all allied materials complete in all respects as per approved design and directions of Engineer-in-Charge.including 2d/3d CNC where ever required. HDMR and plywood to be of approved make such as Action Tesa, Century Ply, Mother Wood, Greenply or equivalent. |
| 21 | Providing, fixing and applying Plaster of Paris (POP) false ceilingconsisting of frame work made with 50mm sq M.S. tubes of 18 Gthickness as main runner at 600 mm c/c both ways, suspended/ supportedwith M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth toline and level including necessary supports, scaffolding etc. as requiredand also including applying a coat of red oxide zinc chromate primer overthe M.S.frame work and suspenders complete12.47.1 Including providing and fixing expanded metal of size 5.25mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm |
| 22 | Providing and fixing of khatumbandi of required pattern,incl.12 mm thick ply base with 12mm ply and two or more coats of polishing as directed by engineer inchcharge. |
| 23 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly einforced with 1.60 t 0.2 mm thick galvanized mild steel section made from rol torming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles. G.) fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and ecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be 27.50also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (toughned glass panes as approved by engineer in charge Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension .e. in depth &x width of profile shall be acceptable, Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 24 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed/Panneled door comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly forced with 1.60t 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 30 hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless stee screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all comners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proofsilicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ( Incl cost of Single toughened glass panes/Pannel and silicon sealent ). Note: For uPVC frame, sash and mullion Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate. |
| 25 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding .grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 26 | Providing and fixing 12 mm thick toughened safety glass panes of approved quality in existing railing and window frames/chowkhats, of required shape and size, including carefully removing existing shutters wherever required; taking site measurements and templates; cutting to required size and shape before toughening; machine edge grinding and polishing; bevelling/moulding and rounding of edges and corners to the required profile; making necessary holes, notches and cut-outs before toughening; providing approved frosted/etched decorative design wherever required; and fixing complete with necessary beading, glazing sealant, rubber/EPDM packing and all incidental materials, complete in all respects as per approved drawings, design, sample. and renoving of shutter ,reinstalling of existing frames with two or more coats of enamel paint as per direction of Engineer-in-Charge. |
| 27 | Rebaring Work upto depth of 250mm-300mm with injectable motar re500 hilti adhesive as approved by engineer incharge complete in all respects including drilling and cost of all material 16/20mm dia bar and depth upto 250mm-300mm |
| 28 | PART A (Construction/Restoration of Sarai Sahib where pilgrims stay during visit) |
| 29 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 30 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 31 | Providing and laying stone soling by way of Nallah boulders size on level ( Hand packed ) Watering ,ramming complete below foundation & rooms including carriage |
| 32 | Cast in situ Conc. with nominal mix M-7.50 grade with 40mm nominal size agg..incl all leads lifts, carriage complete. |
| 33 | CAST-IN-SITU Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 34 | All works above plinth level upto v level |
| 35 | Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 36 | Centering and shuttering including strutting, propping etc and removal of form work |
| 37 | Foundations, footings, bases of columns etc. for mass concrete. |
| 38 | Walls any thickness including attached buttresses, plinth and string courses etc. |
| 39 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 40 | Suspended floors, roofs, landings, balconies and access platforms. |
| 41 | P/L and placing high strength deformed steel including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 42 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 43 | Brick with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) incl all carriage of materials from source to site of works.up to V level floor. |
| 44 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Including Holdfast complete job:Of First class KAIL wood |
| 45 | Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws . Including all hardware iteams complete job.First class KAIL wood |
| 46 | Providing/fixing 5mm thick float glass incl cutting placing in position complete job (including decrative glass pains for dides of doors) |
| 47 | Providing and fixing 12 mm thick toughened glass panes of required shape and size in chowkhats, including cutting, edge polishing, bevelling and rounding of corners wherever required, approved frosted design wherever required, and fixing complete with necessary beading, sealant and all incidental materials, complete in all respects as per approved design and direction of Engineer-in-Charge. |
| 48 | 15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar) |
| 49 | Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm |
| 50 | Providing and applying white cement based wall putty of avg.2mm of approved brand and manifuture |
| 51 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 52 | Ruled/ Flush pointing on brick stone masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved and scaffolding) |
| 53 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 54 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 55 | Providing colour coated Hi-rib profile sheet roofing of approved brand & manufacture, fixed with polymer coated steel screws bolts 100 mm long 8 mm dia with washers & plc. cap (upon a pitch of 60 degrees) excluding the cost of purloins, rafters and trusses (0.50mm thick) |
| 56 | Providing ridges/ hips /valleys 600mm overall width with GS plain colour sheets with necessary fittings |
| 57 | Providing and fixing 1st quality Vertified floor tilesof size 600x600 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed withpigment of matching shade complete. |
| 58 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 59 | Providing and laying 15 mm thick Nano Matt Marble flooring of approved make, colour and shade over 20 mm thick cement mortar (1:4) bed, including cutting, dressing, edge moulding/chamfering, laying to proper line and level, filling joints with matching epoxy/marble grout, machine grinding, nano matt finishing, curing, cleaning, all materials, labour, tools & plants, carriage, complete as directed by the Engineer-in-Charge. |
| 60 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding .grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 61 | Providing and fixing 12 mm thick toughened safety glass panes of approved quality in existing railing and window frames/chowkhats, of required shape and size, including carefully removing existing shutters wherever required; taking site measurements and templates; cutting to required size and shape before toughening; machine edge grinding and polishing; bevelling/moulding and rounding of edges and corners to the required profile; making necessary holes, notches and cut-outs before toughening; providing approved frosted/etched decorative design wherever required; and fixing complete with necessary beading, glazing sealant, rubber/EPDM packing and all incidental materials, complete in all respects as per approved drawings, design, sample and direction of Engineer-in-Charge. |
| 62 | Providing and fixing of khatumbandi of required pattern,incl.12 mm thick ply base with 12mm ply including frame of wood work (imported wood )and two or more coats of polishing as directed by engineer inchcharge. |
| 63 | Providing and laying of cement concrete rings 3' wide dia in soakage pit includind excavation and a cover slab all complete job 9 inch height of each ring |
| 64 | Supply and fixing the following sizes of RIGID PVC conduits 1.8 mm thick (ISI Marked) complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on surface including cutting chases in the walls/floors and making good the same complete as required. |
| 65 | 25 mm dia RIGID PVC conduits |
| 66 | Fan junction Boxes |
| 67 | Ceiling Lighting junction boxes/cases |
| 68 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 69 | PN-16 pipe, 25mm OD(SDR-7.4) |
| 70 | PN-16 pipe, 32mm OD(SDR-7.4) |
| 71 | Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve of approved quality confirming to IS 778, PN 10, with necessary specials, unions, nipple etc., |
| 72 | 25mm dia |
| 73 | 32mm dia |
| 74 | Providing and fixing of 32mm PPR Union |
| 75 | Providing, fixing & laying 25mm dia G.I. pipes Medium type complete with G.I. fittings and clamps, incluing trenching and refilling (external work) |
| 76 | Providing and fixing vitreous china wash basin in existing marble counter, including cutting/alteration of marble wherever required, making opening to the required size, fixing with approved sealant and brackets/clips, providing and fixing C.P. brass pillar cock(s), waste coupling, bottle trap, angle valves, flexible connection pipes, all necessary fittings, testing for leakage, making good the damaged portion and cleaning the site, complete in all respects as directed by the Engineer-in-Charge. |
| 77 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 78 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 79 | Providing and fixing 8 mm thick superior quality bevelled edge mirror of approved make and quality, fixed to the wall with approved mirror adhesive, including edge moulding/polishing all around, stainless steel screws with chrome-plated caps/rosettes wherever required, all fittings, cutting to required size, labour, tools and plants, carriage, loading, unloading, and all incidental charges complete in all respects as directed by the Engineer-in-Charge. |
| 80 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 81 | Providing & Fixing C.P. tubes of approved make 450mm to 600mm long. |
| 82 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 83 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 84 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:18.4.4 Range of four urinal basins with 10 liter white P.V.C automatic flushing cistern. |
| 85 | Providing and fixing P.V.C. pipe and pipe fittings of the following nominal dia to P.V.C. Soil/Waste/Ventilating pipes, excluding cost of holder-bats. |
| 86 | Pipe 100mm |
| 87 | Floor trap 100mm |
| 88 | Door T 100mm |
| 89 | Collars 100 mm |
| 90 | Reducer 100 x 50mm |
| 91 | Pipe 75mm |
| 92 | Floor trap 75mm |
| 93 | Door T 75mm |
| 94 | Collars 75 mm |
| 95 | Pipe 50mm |
| 96 | Cone covel 50mm |
| 97 | PVC waste pipe |
| 98 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 99 | Providing and fixing of 3-layer water storage tanks of approved quality and make. |
| 100 | Providing & Fixing 600x20 mm C.P brass towel rail of approved make with C.P brackets fixed to wooden cleats with C.P brass screws etc. including cutting and making good the walls wherever required . |
| 101 | Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floor traps and floor drains with cement mortar, complete in all respects.100mm dia |
| 102 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each |
| 103 | Providing and fixing toilet paper holder C.P. brass |
| 104 | PART B (Construction/Restoration of Sarai Sahib where pilgrims stay during visit alongwith gender based toilet) |
| 105 | Reinforced cement concrete work in beams, suspended floors, roofs having slop upto 150 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor 5 level excluding cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (1 cement: 1.5 coarse sand :3 graded crushed stone agg. 20 mm nominal size) Incl. all carriages of material involved. |
| 106 | Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete ( thermo- mechanically Treated bars ) . |
| 107 | Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) in super structure upto fifth floor level |
| 108 | Centring and shuttering using kit ply including proping, strutting & removal of the same in suspended floors,beams, pillars columns etc. |
| 109 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 110 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. |
| 111 | 15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar) |
| 112 | Applying 2mm thick wall putty on wall surface for smooth finish (two or more coats) including head load & carriage |
| 113 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Including Holdfast complete job:Of First class KAIL wood |
| 114 | Providing and fixing30mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws . Including all hardware iteams complete job.First class KAIL wood |
| 115 | Providing and 30mm fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge including all haedware iteams complete job : First class KAIL wood |
| 116 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with wodden moulded frame of approved make and shade with 6 mmthick hard board backing Rectangular shape 1500x450 mm. |
| 117 | Structural Steel work welded in built up sections trusses and framed work including cutting hoisting welding & fixing in position and applying a priming coat of approved steel primer all complete. Including soffit & Eaves Bording of 2mm thick MS Sheet I/C priming coat and painting three or more coats. |
| 118 | Providing and fixing 0.50 mm thick colour CGI Sheets roofing fixed with self driven screws incl. cost of all materials and providing ridges hips of 60 cm over all width of plain precoated sheets fixed with self driven screws including cost of all materials |
| 119 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding .grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 120 | Providing and fixing 12 mm thick toughened safety glass panes of approved quality in existing railing and window frames/chowkhats, of required shape and size, including carefully removing existing shutters wherever required; taking site measurements and templates; cutting to required size and shape before toughening; machine edge grinding and polishing; bevelling/moulding and rounding of edges and corners to the required profile; making necessary holes, notches and cut-outs before toughening; providing approved frosted/etched decorative design wherever required; and fixing complete with necessary beading, glazing sealant, rubber/EPDM packing and all incidental materials, complete in all respects as per approved drawings, design, sample and direction of Engineer-in-Charge. |
| 121 | Providing and fixing of hardware items of ISI Marked of standard quality and make.brass of superior quality . |
| 122 | CONCILED LOCK |
| 123 | Handles 100mm |
| 124 | Handles 150mm |
| 125 | Tower bolts 100mm |
| 126 | Tower bolts 150mm |
| 127 | Hooks 100mm |
| 128 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (04 nos of 2000 ltr each) |
| 129 | Providing and fixing P.V.C. pipe and pipe fittings of the following nominal dia to P.V.C. Soil/Waste/Ventilating pipes, excluding cost of holder-bats |
| 130 | Pipe 100mm |
| 131 | Floor trap 100mm |
| 132 | Door T 100mm |
| 133 | Collars 100 mm |
| 134 | Reducer 100 x 50mm |
| 135 | Pipe 75mm |
| 136 | Floor trap 75mm |
| 137 | Door T 75mm |
| 138 | Collars 75 mm |
| 139 | Pipe 50mm |
| 140 | Cone covel 50mm |
| 141 | PVC waste pipe |
| 142 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc |
| 143 | PN-16 pipe, 25mm OD(SDR-7.4) |
| 144 | PN-16 pipe, 32mm OD(SDR-7.4) |
| 145 | Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve of approved quality confirming to IS 778, PN 10, with necessary specials, unions, nipple etc., |
| 146 | 15mm dia |
| 147 | 20mm dia |
| 148 | Providing, fixing & laying 25mm dia G.I. pipes Medium type complete with G.I. fittings and clamps, incluing trenching and refilling (external work) |
| 149 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer each 4841.20 |
| 150 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting |
| 151 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
| 152 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe |
| 153 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid. |
| 154 | Providing and fixing water heater 50 litre capacity (GYSER) of Jaquare or equavlient quality and make including all fixtures. |
| 155 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 156 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 157 | Providing and fixing of cockrach type CP grating of standard quality and make 100mm |
| 158 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 159 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 160 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on New work. |
| 161 | Development and Beautification of Gurdwara premises including heritage landscaping, pathways, public spaces and allied works. |
| 162 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed. |
| 163 | P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load. |
| 164 | P/L in position cement concrete of specified grade excl. the cast of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size). |
| 165 | Providing/laying in position specified grade of Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement in ) all works up to plinth level (1:1.5:3 graded stone aggregate 20mm nominal |
| 166 | Reinforced cement concrete work in beams, suspended floors, roofs having slop upto 150 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor 5 level excluding cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (1 cement: 1.5 coarse sand :3 graded crushed stone agg. 20 mm nominal size) Incl. all carriages of material involved. |
| 167 | Brick work with FPS bricks of class designation 75 in super structures in 1:6 mix. Including Extra cost for brick work in superstructure above plinth level upto floor V level. (By manual means)Including all carriages and Costs all complete job. |
| 168 | Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete ( thermo- mechanically Treated bars ) . |
| 169 | Cement concrete flooring (1:2:4)mix graded stone agg. 20mm nominal size of crushed stone agg. finished with a floating coat of neat cement, including slurry amd curing complete .40mm thick. |
| 170 | 15mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand) Including waterproofing |
| 171 | P/L in position cement concrete of specified grade excl. the cast of centering and shuttering: 1:3:6(1 cement 2: coarse sand 4 graded stone crushed agg.40mm nominal size). |
| 172 | Provinding and filling of Nallah muck in rooms and ground complete job including carriage in front of Sarai building |
| 173 | Providing and fixing ornamental slider MS gate 03 nos of required designation incl all iteams all oxide and paints complete jobs. |
| 174 | Providing and laying chisel-dressed Devri stone masonry in cement mortar 1:6 (1 cement : 6 coarse sand), using stones of 300 × 200 mm face size and 150 mm depth, for construction of entrance gate pillars and arch of required shape, curvature and design, including fine chisel dressing of exposed faces, cutting and dressing of stones to required radii, voussoir/wedge shapes and sizes for formation of arch, forming ornamental mouldings, grooves, bands, projections, cornices and decorative profiles as per approved architectural drawing, including templates, scaffolding, centring and supporting arrangement required for execution of arch, raking and finishing of joints, pointing with matching cement mortar, curing, all leads and lifts, wastage, tools and plants, complete in all respects as per approved design and directions of Engineer-in-Charge. |
| 175 | Centring and shuttermg including strutting, propping etc.and removal of form for Foundations: footings, bases of columns etc. for mass concrete. |
| 176 | COLUMNS/BEAMS |
| 177 | Providing and fixing of 25 mm devri stone tile cladding over over 20 mm thick lime sand mortar in 1:2 mix complete as per engineer in charge including all carriages complete job |
| 178 | Providing and laying heavy duty full body / double charge anti-skid vitrified floor tiles of approved make, colour, shade and size 16\\"×16\\" (minimum thickness 10–12 mm) in flooring over 20 mm thick cement mortar (1:4) bed including neat cement slurry, cutting, dressing, fitting around edges, grooves wherever required, filling joints with white cement mixed with matching pigment, curing, cleaning and finishing complete in all respects as directed by Engineer-in-Charge. |
| 179 | Providing, fabricating and fixing decorative marble signage/name boards of approved size, shape and design in prepared recesses/panels of Devri stone-clad entrance gate, comprising 18–20 mm thick first-quality white marble slabs, machine cut to required dimensions, with all exposed edges machine moulded and polished, including engraving/recessing and embedding of the complete name of the Gurdwara separately in Punjabi (Gurmukhi), Hindi (Devanagari) and English scripts on individual marble panels, using CNC/water-jet cut letters of approved contrasting stone/black granite or other approved material, fixed in accurately cut recesses with high-strength epoxy resin adhesive, including preparation of recess in Devri stone work, cutting and making good surrounding Devri stone tiles, stainless-steel cramps/dowels for secure fixing, stone adhesive, backing mortar, decorative border/grooves, polishing, drilling, cutting, wastage, scaffolding and all materials and labour, complete in all respects as per approved drawings and direction of Engineer-in-Charge |
| 180 | Providing, fabricating and fixing project information/signage board of size 6'-0\\" × 4'-0\\", made of approved gauge stainless steel sheet of Grade SS-304, securely fixed over suitable stainless steel/MS framework with necessary stiffeners, complete with permanently printed/engraved project particulars including name of work, sanctioned cost, funding agency/scheme, executing agency, contractor, date of start, stipulated date of completion and other required information, including approved lettering, logos/emblems, border, nuts, bolts, welding, supports, anchoring and fixing at approved location, complete in all respects as per approved design and direction of Engineer-in-Charge |
| 181 | Exterior Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 182 | Providing and fixing P.V.C. pipe of 100 mm and pipe fittings of the following nominal dia to P.V.C. Soil/Waste/Ventilating pipes, excluding cost of holder-bats |
| 183 | Construction of Boundary Wall at Sach Khand Kutiya Sahib |
| 184 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed. |
| 185 | P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load. |
| 186 | P/L in position cement concrete of specified grade excl. the cast of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size). |
| 187 | Providing/laying in position specified grade excluding the cost of centering & shuttering – All work upto plinth level. (M-10 Mix) 1:2:4 (1 Cement: 2 Coarse Sand: 4 graded stone aggregate 20mm nominal size- crushed.) |
| 188 | Centring and shuttermg including strutting, propping etc.and removal of form for Foundations: footings, bases of columnsetc. for mass concrete. |
| 189 | Brick work with FPS bricks of class designation 75 in super structures in 1:6 mix. Including Extra cost for brick work in superstructure above plinth level upto floor V level. (By manual means)Including all carriages and Costs all complete job. |
| 190 | 12mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand) |
| 191 | Providing/laying in position specified grade of cement concrete coping 50mm thick in M15 Grade including all carriages and costs. complete job. |
| 192 | Painting walll with oil bound washable excel of approved brand and manufacture to given an even shade. |
| 193 | Providing and fixing ornamental MS gate of required designation incl all oxide and paints complete jobs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender