Tender For Repairing And Overhauling 5Hp Submersible Pump Of Floating Barge And Replacement Of Damanged Lighting Lumineries Of Cantiliver Bridge And Pressure Filter Area And Other Allied Work At Dalmia Ocp W/S Scheme Under Asansol Mechanical Division, Phe
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
asansol → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairing And Overhauling 5Hp Submersible Pump Of Floating Barge And Replacement Of Damanged Lighting Lumineries Of Cantiliver Bridge And Pressure Filter Area And Other Allied Work At Dalmia Ocp W/S Scheme Under Asansol Mechanical Division, Phe Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Withdrawing of defective 5 HP submersible pump motor set along with its column pipes by necessary, arrangement & skilled labour after disconnection of power line & delivery pipe line. |
| 2 | Dismantling the defective pump & motor set part by part for detecting actual fault. |
| 3 | Carrying the defective 2 (two) Pump Set from Dalmia to Dendua work shop by hired vehicles including loading and unloading on both the end as per direction. (Above 10KM upto 20KM) |
| 4 | Supply of spares for pump motor rotating assembly with machining as follows:- |
| 5 | Oil seal Set. (Make-Approved make) |
| 6 | Thrust plate and segment ring set. (Make-Approved make) |
| 7 | Shaft sleeve (S.S) |
| 8 | Bowl bush |
| 9 | Coupling bush(G.M) |
| 10 | SS key for impeller |
| 11 | Rewinding of 5HP motor with high grade copper wire (1mm) along with heat vernishing including supply of necessary hardwares. |
| 12 | Rotor bush (G.M) |
| 13 | Oil seal |
| 14 | Thrust bearing |
| 15 | Reassembling the pump & motor set with the above supplied materials as mentioned in item no. 2.01-2.19 and the old serviceable spares to complete the job as per direction of E. I. C. |
| 16 | 3 CoreX 4 Sqmm water proof flat submersible copper cable, suitable for above pump set as per IS:694/2010. (Make-Approved Make) |
| 17 | Laying of 10 mm2 x 3 core Al. Ar. Cable along the length of G.I. collecting line including fixing with supplied clamps, nuts and bolts at a suitable interval so as to prevent sagging of cable complete as per direction of EIC.(Panel to Kiosk Box) |
| 18 | Making Straight through joint of 3 Core 1.5/2.5 mm² Flat Sub. Cable with 3 Core 4 mm³ Flat Submersible Cable by Supplying necessary socket, tapes, and jointing materials to make joints Leak proof all complete as per diration of EIC. |
| 19 | Anchoring the berge with the bank of OCP with help of supplied nylon rope and anti snapping safety device twisted chord twine rope of suitable size as per direction of EIC. |
| 20 | Supply of high grade Nylon rope for fixing the Floating berge in proper position. |
| 21 | Painting the following repaired pump-motor set with supplying of approved quality paint after scrapping the old painted surface as per direction. |
| 22 | Lowering the Repaired 5 HP submersible pump motor set alongwith its column pipes & connection of power line and delivery pipe line complete |
| 23 | Supplying and fixing 20 Amp, 240/415 V, TP-MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make-ABB, Type code-SB) |
| 24 | Supplying and fixing 16 Amp, 240/415 V, DP-MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make-ABB). |
| 25 | Supplying and fixing 6 Amp, 240/415 V, SP-MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make-ABB). |
| 26 | At first removed the damaged MCBs from the existing site after thorughly checking the panel, and fitting the newly supplied items (Sl. No.- 11.01 to 11.03) as per direction of EIC. |
| 27 | Supplying and Fixing SS water proof looping cable box having hinged SS Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.(For 12 Nos Street light of Sub-Station Buliding) |
| 28 | Opening the above mentioned Panel part by part and after checking the same , refitting the newly supplied item as well as old servicable item, and commissioning the panel as per direction of EIC. |
| 29 | Dismantling and lowering of the outdoor lighting luminaries from the top of the pole as well as outside of pump house by using of scaffolding arrangement after disconnection of electrical connection etc as per direction. ( damaged of 2 nos. of 90W street light and 3 nos damaged 70 Watt floodlight) |
| 30 | 110 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make:-Approved Make) |
| 31 | 90 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make:-Approved Make) |
| 32 | 70W high-efficiency IP66 innovative LED floodlight with pressure die-cast aluminium housing and toughened glass in the front with unique flood optics to ensure uniform distribution and savings upto 50% as compared to conventionalsystem. (Product code-LFSMP-070-C) |
| 33 | 60 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make:-Approved Make) |
| 34 | 3 Core X 1.5 sqmm industrial flexible copper cable wire /dia-30/0.25 PVC insulated with PVC sheathed.(Make:Approved Make) |
| 35 | Fitting & fixing of the outdoor lighting luminaries along with new & old accessories to the pole, building & gate etc as per direction of EIC. |
| 36 | Add. GST@18% |
| 37 | Add. Cess@1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender