Tender For Repair To Flooring, Plastering, False Ceiling, Wall Panelling, Joinery And Sanitary Fittings For Zone A At Lgj Mil Stn Under Ge Lalgarh Jattan
Tender Value
50 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
17 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring, Plastering, False Ceiling, Wall Panelling, Joinery And Sanitary Fittings For Zone A At Lgj Mil Stn Under Ge Lalgarh Jattan
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on bricks or stone walls etc and including raking out joints, hacking for key scrubbing down with water etc complete all as specified & directed by Engr-in-charge. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement including M&L for preparation by suraface with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of 100% premium intetrior acrylic emulsion paint by using brush roller over and including one coat of primer complete all as specified & directed by Engr-in-charge. |
| 3 | M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished even and smooth without using extra cement etc upto height 9.60 m including M&L for applying two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on newly plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 4 | M&L for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished fair and even and smooth without using extra cement including M&L for applying three coats of white wash on new plastered surface as on ceiling incl preparation etc complete all as specified & directed by Engr-in-charge. |
| 5 | M&L for complete removal of existing Internal wall surface finishes and treament with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of 100% premium intetrior acrylic emulsion paint by using brush roller complete all as specified & directed by Engr-in-charge. |
| 6 | M&L for complete removal of existing External wall surface finishes and treament with help of mechanicallly with two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on old plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 7 | M&L for complete removal of existing Ceiling surface finishes treament with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of 100% premium intetrior acrylic emulsion paint by using brush roller complete all as specified & directed by Engr-in-charge. |
| 8 | M&L for preparation of old plastered surfaces and appying two coats of white eash on ceiling complete all as specified & directed by Engr-in-charge. |
| 9 | M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of old painted surfaces with one coat of synthetic enamel paint ordinary tint all as spefified and directed by Engr-in-Charge. |
| 10 | M & L for painting wooden surfaces of any discription,over 10 cm width or girth, with preparation of old painted surfaces with one coat of synthetic enamel paint ordinary tint all as spefified and directed by Engr-in-Charge. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-charge. |
| 12 | M & L for Double charge vitrified coloured tiles (approved shade) of size 600mm x 600mm having thickness 8 to 9 mm premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floor, set and jointed using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Ditto all as per Item no 12.00 here in before, on vertical surfaces such as skirtings ,set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) complete all as specified & directed by Engr-in-charge. |
| 14 | M&L joint free Non- skid coloured ceramic tiles 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. Set & jointed in neat cement slurry & jointed in coloured cement to match the colour of tiles over & including 15 mm thick screed bed in cm 1:4 and pointed in epoxy grout to match in floor complete all as specified & directed by Engr-in-charge. |
| 15 | M&L for Providing and Laying Premium (1st) quality having water absorption should be between 10% to 20%, digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 7 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified & directed by Engr-in-charge. |
| 16 | Dismantling stone slabs and tiles of any description or thickness, laid, bedded and pointed in any mortar as in floors, aprons etc complete all as specified and directed. |
| 17 | M & L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and including 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 18 | Dismantling wall and ceilling boarding, (fiber, pulp, insulation, etc.) or insulation board /slab /blankets, any thickness, in snap grid complete all as specified & directed. |
| 19 | Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge. |
| 20 | M & L for 4 mm thick plain fibre cement flat sheets type B, any category as per IS 14862: 2000 (non-asbestos) building boards, cured in HPSC (high pressure steam curing ) process, highly chemical stabilised, design and texture as approved of Make Armstrong/Everest/ Ramco, fixed to timber/GI /Aluminium framework with screw in ceilings flat or sloping complete all as specified and as directed. |
| 21 | Supply & fixing Solid PVC Wall paneling consisting of 5mm thick wood grain printed PVC sheet inclusive of corner fillet, solvent and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed by Engr-in-charge. |
| 22 | Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified & directed by Engr-in-charge. |
| 23 | Taking down chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all as specified & directed by Engr-in-charge. |
| 24 | Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified & directed by Engr-in-charge.(Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) |
| 25 | Taking down shutter but exc 1 sq. m and n exc 2 sq. m each complete all as specified & directed by Engr-in-charge. |
| 26 | S&F powder coated aluminium frame for doors, windows, ventiators with one or more rebates including jointing cleats for fixing with powder coating on aluminium sections, minimum thickness of powder coating shall be 50 micron as per the specification, complete all as specified & directed by Engr-in-charge. |
| 27 | S&F Powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m (min thick 1.50 to 1.80 mm including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges (3 Nos), mortaice lock (01 No), tower bolt (02) anodised aluminum snap beading screws etc.minimum thickness of powder coating shall be 50 micron as per the specification, complete all as specified & directed by Engr-in-charge. |
| 28 | S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m (min thick 1.50 to 1.80 mm ) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) in each window shutter and necessary accessary as required complete all as specified & directed by Engr-in-charge.. (Note:- Glass will measured and paid separately) |
| 29 | S & F 4.80 mm thick plain type sheet glass glazing to aluminium door and the like in square exc. 0.50 sqm in each pane complete all as specified & directed by Engr-in-charge. |
| 30 | S&F in repairs door closer hydraulicaly regulated made of aluminium cast type designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed other parts made of steel heavy duty, complete all as specified and directed by Engr in Charge |
| 31 | S&F in repairs double action floor spring hydraulical regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, govering pivote made of brass other parts made of steel heavy dyty and fix in floor complete all as specified and directed by Engr in Charge |
| 32 | Supply & fixing factory made UPVC white colour three track panels sliding window with fly proof SS wire mesh (Two Nos glazed & one No. wire mesh) upto 1.5 m height made of (big series) frame 90mm X 42 mm & Sash 31 mm X 57 mm both having wall thickness of 2.3mm (+ -0.2mm) and single/double glazing beads of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 (+- 0.2 mm) thick galvanized mild steel section made from roll forming of required length (shape & size according to UPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVc extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coaled) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg). G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling on holes for fixing hardware's and drainage of water etc. After fixing frame, the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality including uPVC grill (as per approved sample), Glass- 5mm thick toughened glass and Wire cloth – stainless steel 304 grade, natural finish, wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed by Engineer-in-Charge.Note: - (1) The cost of glass, wire mesh, and all other connected accessories shall deemed to be included in the quoted unit rate. (ii) Net Opening will be measured for payment purpose. (iii) Cutting holes of suitable depth in wall for inserting lugs etc including making good dismantled portion with PCC (1:2:4) type B-0 using 12 5mm graded crushed stone aggregate and cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (iv) uPVC frame, sash and mullion extruded profiles (+- 5%) tolerance in dimension i.e. in depth & width of profile shall be acceptable. |
| 33 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 150 mm one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engr-in-charge.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 34 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engr-in-charge.Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 35 | M & L for factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge including supply and fixing following items :-(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bolt 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020. (e) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf. |
| 36 | M & L for factory made single extruded WPC (Wood Polymer Composite) Glazed/Gauged Skelton door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge including supply and fixing of following items :-(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bolt 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020. (e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.(f) Stainless steel (304 Grade) wire cloth fixing as per manufacturer's instructions |
| 37 | M & L for factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge including supply and fixing following items :-(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bolt 100 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 150 mm-2 Nos per leaf. |
| 38 | S & F in repair HDHMR Board , 18/19mm thick, density over 850kg/cum, having a class A fire rating, grade 2 quality, commercial type, as in cupboard shutter fixed with and including continuous SS (304 grade) piano hinges with width of flap 30mm, with lock and locking arrangement, Stainless steel (304 grade) Finished Handle 200mm long- 01 No on each shutter complete all as specified and directed by Engineer-in-charge Note:- Design and pattern will be finalized as per site reqmt. |
| 39 | S & F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 40 | S&F in repair sheet glass 4 mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane including taking hacking out old broken glass from metal frame complete all as directed. |
| 41 | S&F in repair 4 mm thick figured glass pin head type and glazing with oil putty in square n. exec 0.5 Sqm in each pane including taking hacking out old broken glass from metal frame complete all as specified & directed by Engr-in-charge. |
| 42 | S&F in repair Stainless Steel curtain roads, standard quality, not less than 19/25 mm dia with heads, wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finals), stop roller etc, fixed on wall for doors and windows curtains, cutting as required length and fixing at site including fixing arrangements, rawl pluig, screws etc (size and dia of rods are directed by Engr-in-charge ) including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engr-in-charge. |
| 43 | Dismantling water tank of capacity Exc 250 litres and not exc 500 litres and removing from site and S&F 500 litres, rotational moulded polyethylene water storage tank ISI Marked (Cylindrical vertical with closed top), hoisted and fixed in position incl 20 mm bore PTMT float valve,connecting 2 Nos nipple/ sockets etc complete all as specified & directed by Engr-in-charge. |
| 44 | Dismantling water tank of capacity Exc 500 litres and not exc 1000 litres and removing from site and S&F 1000 litres, rotational moulded polyethylene water storage tank ISI Marked (Cylindrical vertical with closed top), hoisted and fixed in position incl 20 mm bore PTMT float valve,connecting 2 Nos nipple/ sockets etc complete all as specified & directed by Engr-in-charge. |
| 45 | S&F in repair looking mirror 600 x 450mm of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified & directed by Engr-in-charge. |
| 46 | S&F in repairs vitreous china wash hand basin coloured flat back size 550 x400 mm, long screwed shank fly nut flange end including cutting for and pinning in ends for brackets in 1:3 CM, including 32 mm dia chromium plated waste coupling/trap and waste pipe complete all as specified & directed by Engr-in-charge. |
| 47 | S&F in repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including cast iron 'P' or 'S' trap and connection to trap antisyphonage pipe and making good to floor complete all as specified & directed by Engr-in-charge. |
| 48 | S & F in repair vitreous china wash down water closet pan (Pedestal pattern) white EWC floor or wall hung type with PVC seat cover including fixing bolts and making connection to flushing cistern, including 100mm dia trap etc and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified & directed by Engr-in-charge. |
| 49 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle and telescopic pipe and connection to pipe including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified & directed by Engr-in-charge. |
| 50 | S&F in repair vitreous china urinal flat back of size 465X355X265 mm white (minimum), with grating & union for discharge pipe including chromium plated spreader for fixing with 15 mm dia pipe (minium weight 60 grms) but including flushing cistern, flush pipe & waste pipe but fixing only automatic flushing cistern with bracket flush pipe etc complete including providing and fixing plungs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, Make:- Parryware/Cera/Jaquar or equivalent complete all as specified & directed by Engr-in-charge. |
| 51 | S&F in repair swan neck type pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore Wt not less than 450gms complete all as specified & directed by Engr-in-charge. |
| 52 | S&F in repair long bib taps 15mm bore cast coper alloy CP long body fancy type, with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule Wt not less than 450gms complete all as specified & directed by Engr-in-charge. |
| 53 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified & directed by Engr-in-charge. |
| 54 | S & F in repair 15 mm dia stop/ Angle valve fancy type, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed Wt not less than 450gms complete all as specified & directed by Engr-in-charge. |
| 55 | S&F in repair, chromium plated shower rose, 125mm size, brass chromium plated with sweivel joint complete all as specified & directed by Engr-in-charge. |
| 56 | S & F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed. |
| 57 | S & F in repair 15 mm dia Concealed stop valve fancy type, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed Wt not less than 450gms complete all as specified & directed by Engr-in-charge. |
| 58 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed by Engr-in-charge. |
| 59 | S & F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified. |
| 60 | S & F in repair CP toilet paper holder with flat recessed type stainless steel complete all as specified and as directed. |
| 61 | S & F in repair Soap dish, Stainless steel of approximate size 160 x 160 x 90 mm embeded in the wall all as specified and directed. |
| 62 | S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard and railing 60 cm long. |
| 63 | S&F Supplying and laying of 20 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing and connection complete all as specified & directed by Engr-in-charge. |
| 64 | S&F Supplying and laying of 25 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing and connection complete all as specified & directed by Engr-in-charge. |
| 65 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overalll as fixed along the cente line over fittings and accessories) complete all as specified & directed by Engr-in-charge. |
| 66 | S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified & directed by Engr-in-charge. |
| 67 | S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified & directed by Engr-in-charge. |
| 68 | S & F 110mm dia PVC (SWR) bends with access door complete all as specified & directed by Engr-in-charge. |
| 69 | S & F 75 mm dia PVC (SWR) bends with access door complete all as specified & directed by Engr-in-charge. |
| 70 | S&F PVC (SWR) in repair floor trap of 75 mm dia outlet plain with grating including CP grating jointing with solvent cement complete all as specified & directed by Engr-in-charge. |
| 71 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed. |
| 72 | M & L for old size brickwork with subclass ‘B’ bricks, straight or mean radius built in CM 1:4 complete all as specified and directed. |
| 73 | Demolition of cement concrete of any description ( unreinforcement concrete) and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-charge. |
| 74 | M & L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed. |
| 75 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 76 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mk wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumin & sand mixture complete all as specified & directed by Engr-in-charge. |
| 77 | M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as filling of sunken floors/bottom and side of drain complete all as specified & directed by Engr-in-charge. |
| 78 | M&L for water proofing treatment to RCC sunken slab and adjoining vertical surfaces as specified under:- (b) Cleaning of sunken portion and roughening to receive treatment.(b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces. (Note : WPC shall be measured and paide separately.) (c) Applying first coat of chemical pidifin 2K (Dr. fixit) on cleared RCC surface @ 0.80kg/Sqm (Minimum) as recommended by manufacturer.(d) Provide a layer glass fibre mesh of size 2.25mmx 2.25mm (45 GSM) over first coat of chemcial pidifin 2K as per manufacturers recommendation.(e) Applying second coat of chemcial pidifin 2K (Dr fixit) / equivalent @ 0.86 kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25 mm (45 GSM) as recommended by manufacturers.Note :- The plan area of floor shall be considerd for payment. |
| 79 | M & L for Cleaning all existing reinforcement bars in roof, ceiling, chajjas, fascia, fins, drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete as per manufacturer’s instructions complete all as specified and as directed. (Mode of measurement: per sqm of breaking area of concrete.) Make: Sika- Rustoff 100/Fosroc- Reebaklens RR/OM AGRO- DERUSTER/ Pidilite Dr Fixit Rust Remover or equivalent make approved by E-in-Cs Branch. |
| 80 | M & L for Providing and application of zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption quantities as per manufacturer’s instructions but min 0.4 kg/sqm approximately) in beams complete all as specified and as directed. The product shall confirm carbonation resistance of 2 mm and bond strength > 1 N/sqmm according to ASTM C 882-78 (Mode of measurement: per sqm of application area of concrete.) Make: Sika- Friazinc R/ Fosroc- Nitozinc Primer/ Pidilite Dr Fixit Zinc Rich Primer or equivalent make approved by E-in-Cs Branch. |
| 81 | M & L for Apply SBR based bonding agent to the entire concrete surface prior to building up of concrete with polymer modified mortar or any other treatment, including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in roof, ceiling, chajjas, fascia, fins, drops and similar items. Make: Sika - SikaDur 32 LP/ Fosroc - Nitobond SBR (EP)/ Pidilite Dr Fixit Super Latex (EP) or equivalent make approved by E-in-Cs Branch. |
| 82 | M & L for Rebuilding the section of structural damaged RCC elements to its original size and shape in thickness upto 100 mm each by providing and casting ready to use non shrink, cementitious free flow micro concrete having compressive strength >= 60 N/sqmm (28 days) according to ASTM C 1107-99; including mixing, placing, levelling the surface by grinding off cementitious slurry or cementitious joints differences if any and curing complete all as specified and as directed. Make: SG corporation - Verdhaio MC / Pratham enterprises- Impermo 4004/ Optimus Chemicals- opty Re M60 or equivalent. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender