Tender For Repairs And Replacement To Joinery (Doors/ Windows) And Repairs Maintenance Of Certain Buildings, Parking Shed, Gates And Other Connected B/R Works Pocket B At installation Mandovi Under Ge (P) Navy Mandovi
Tender Value
45 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
10 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Replacement To Joinery (Doors/ Windows) And Repairs Maintenance Of Certain Buildings, Parking Shed, Gates And Other Connected B/R Works Pocket B At installation Mandovi Under Ge (P) Navy Mandovi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description not exceeding 1 sqm each from chowkhats, complete all as specified. |
| 2 | Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified. |
| 3 | Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified. |
| 4 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified. |
| 5 | Taking down chowkats or frames not exceeding 1.5 Sqm each complete all as specified. |
| 6 | Taking down shutter and refixing in same opening after rectification work complete of any description n exc 1 sq. m each |
| 7 | Ditto. all as per above item no but exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified. |
| 8 | Taking down shutter and refixing in same opening after rectification work complete of any description exc 1 sq. m and n exc 2 sq. m each |
| 9 | M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in CM 1:6 |
| 10 | S&F extruded aluminium alloy handles, 150 mm long fabricated type anodised all as specified |
| 11 | S&F in repairs extruded aluminium alloy handles, 150 mm long fabricated type anodised all as specified |
| 12 | S&F extruded aluminium alloy handles, 100 mm long fabricated type anodised all as specified |
| 13 | S&F in repairs extruded aluminium alloy handles, 100 mm long fabricated type anodised all as specified |
| 14 | S&F alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long. |
| 15 | S&F in repairs alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long. |
| 16 | S&F alluminium, anodised, barrel tower bolts of extruded section of size 100 mm long. |
| 17 | S&F in repairs alluminium, anodised, barrel tower bolts of extruded section of size 100 mm long. |
| 18 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire & avrage width of aperture 1.4 mm & fixed with aluminium wire staple. |
| 19 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire & avrage width of aperture 1.4 mm & fixed with aluminium wire staple fixed in repair |
| 20 | S&F 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy all as specified |
| 21 | S&F in repairs 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy all as specified |
| 22 | S&F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty / beeding in squares not exceeding 0.5 sqm each pane all as specified . |
| 23 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 24 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beeding in squares exceeding 0.5 sqm each pane fixed all as specified . |
| 25 | M&L for second class hard wood plain solid, straight chowkats and frames wrought framed rebatted on the solid, rounded or chamfered put together with glue, pinned at joints all as specified and directed. |
| 26 | S&F 2nd class hard wood, 35 mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied & fitted to Chowkats all as specified and directed by Engineer in charge. Make: A-1 Teak wood or equivalent |
| 27 | S&F 2nd class hardwood factroy made plain framed panelled shutter, 35 mm thick, B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer in charge. Make: A-1 Teak wood or equivalent |
| 28 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, as per specification & drawing Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 29 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of Frame size 65x 150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, as per specification & drawing Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 31 | S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and shown in drg for SI No. 8095 on ser page No. 160 in SSR-2010 (Pt-II), complete all as specified and directed. |
| 32 | S&F factory Made solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet with Free EPS shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing for SI No.8080 on ser page No.156 in SSR-2020 (Pt-II), complete all as specified and directed. |
| 33 | M&L for factory made 18mm (+0.70mm) thick celuka PVC ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company, One side prelam and other side plain 18mm thick Celuka PVC Ply for cupboard shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the material, complete all as specified and directed. |
| 34 | Supply and Fixing (S&F) in repair of door bottom sealing strip (Snake Guard) upto 1.50 M length under the wooden/aluminium/pvc/FRP/WPC door. The strip must have a rigid, anodised Aluminium plate backing and dense Nylon bristles. It must serve as weather stripping, sound blocking, air blocking, and reptile protection. It must fit snugly against the floor without restricting smooth door movement. This includes all necessary screws, fasteners, labor, tools, and scaffolding. All work must be completed as specified and directed by the Engineer-in-Charge. |
| 35 | S&F in repairs 140mm Floor door stopper of aluminium alloy body and tongue, anodised with hard draw steel spring complete all as specified & directed. |
| 36 | Supply and fixing (S&F) in repairs 18 mm / 19 mm thick pre-laminated particle board of exterior grade for cupboard shelves and partitions, including fixing to timber framework with stainless steel screws, by doing the following:Dismantling & Extraction: Carefully remove existing damaged, warped, or loose cupboard shelves and structural partitions from the timber frameworks without cracking or loosening the primary frame joints or surrounding wall plaster.Material Specification: Provide premium 18 mm or 19 mm thick Exterior Grade (Grade I, Type II, IS: 12823 marked) pre-laminated particle board of approved make (such as Action Tesa, Greenpanel, or approved equivalent).Lamination Finishes: The board must be pre-laminated on one side with a selected premium decorative finish (texture, shade, or wood grain pattern as chosen by the consultant) and on the reverse side with a balancing solid white lamination layer to prevent structural warping.Cutting & Edge Banding: Precision cut the boards to the exact required sizes of the cupboard cavity shelves. Seal all exposed raw cut edges with a matching PVC edge-banding tape using hot-melt glue to protect the board core from atmospheric moisture absorption.Fixation & Anchoring: Mount and fix the new pre-laminated shelves securely onto the existing or repaired timber framework. Fasten using heavy-duty, countersunk stainless steel (SS-304) woodscrews of appropriate length, pre-drilling holes to prevent the board from splitting.Alignment & Finishing: Align all shelves horizontally true to line and level using a spirit level, ensuring flush intersections and uniform spacing.This item is all-inclusive of the cost of premium 18/19 mm exterior-grade pre-laminated particle board, PVC edge-banding tapes, hot-melt adhesives, countersunk stainless steel screws, and installation consumables; dismantling and safe disposal of old unserviceable shelf materials; skilled carpentry labor, electric cutting and drilling tools, alignment calibration, and complete cleanup of the internal cupboard space |
| 37 | Material & labour for factory cut or high-precision carpenter-made cupboard shutter doors and shelf cabinet panels inside kitchens or restrooms by doing the following:Material Specification: Provide 1st-quality 18 mm thick Boiling Water Resistant (BWR Grade, IS: 303 marked) plywood of approved make (such as Century SaniPly, Greenply Ecotec, or approved equivalent).Exterior Surface Lamination: Apply a premium 1.0 mm thick decorative high-pressure laminate (Sunmica) of approved color, pattern, and texture (such as Merino, Greenlam, or equivalent) to the visible outer face using high-strength waterproof marine synthetic resin adhesive.Interior Surface Lamination: Apply a 0.8 mm thick solid white balancing laminate (liner Sunmica) to all internal unexposed faces to eliminate structural moisture absorption and prevent panel warping.Edge Treatment: Seal all raw exposed plywood edges completely with a matching 2.0 mm thick PVC edge-banding tape using industrial hot-melt glue to eliminate moisture entry.Hardware Integration: Mount the shutters using premium auto-closing hydraulic soft-close concealed hinges/ stainless steel butt hinges 100/75mm, complete with heavy duty stainless steel handles 100/150mm and magnetic catchers of approved quality.This item is all-inclusive of the cost of premium 18 mm BWR plywood, 1.0 mm decorative Sunmica, 0.8 mm liner laminate, PVC edge-bands, marine adhesives, and fasteners; stainless steel hardware fixtures, soft-close hinges/butt hinges, and handles; skilled carpentry tools, leveling calibration, alignment testing, and final cleanup of the workspace all as specified and directed by Engineer in charge. |
| 38 | S&F 100mm long Stainless steel 304 grade Hasp and staple incl bolt to hinge plate fixed with stainless steel screws |
| 39 | Cutting holes in brick walls, exc. half but not exc. one brick wall built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3, or cement concrete 1:2:4 type B1 complete all as specified |
| 40 | S&F MS mortice lock, 4 levers, vertical type, size 65mm long fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F in butt hinges Stainless steel 100mm long complete all as specified and directed. |
| 42 | S&F in butt hinges, stainless steel 75mm long complete all as specified and directed. |
| 43 | Supply and fixing (S&F) in repairs Mild Steel (MS) heavy-duty rat tail door springs (Capsule type), 300 mm long, complete with roller and roller plate, of approved branded make Harrison lock or equivalent |
| 44 | Providing, supplying, and fixing inn repair a 25 mm nominal outer diameter heavy-duty stainless steel curtain rod with matching decorative stainless steel wall/ceiling brackets. The curtain rod must be manufactured from premium Grade 304 (AISI 304) stainless steel hollow tubes with a uniform wall thickness of not less than 1.0 mm to prevent localized bending, deflection, or sagging under heavy drape loads. The surface must feature a flawless, multi-layered high-shine mirror-polished or satin brushed chrome finish providing complete long-term rust and tarnish resistance. The assembly includes matching, premium-grade heavy-duty decorative stainless steel brackets (wall-to-wall socket type or projection brackets), detailed designer end-cap finials, and internal nylon anti-rattle friction dampeners. The scope of installation includes precise horizontal alignment checking using spirit levels, drilling holes into finished masonry or concrete wall faces without chipping structural tiles, inserting heavy-duty nylon rawl plugs, and anchoring the brackets firmly using grade-304 stainless steel countersunk wood screws. Complete all as specified, detailed on architectural drawings, and directed by the Engineer-in-Charge. |
| 45 | S&F aluminum powder coated window/ventilator/Door shutter including frame , any type (sliding or open-able ) with frame , & other similar work etc fabricated by using the JINDAL / CENTURY section including necessary arrangement to receive 4mm thick sheet glass or wire mesh with aluminium channel beading, stainless steel screws, rollers, maruti lock & F frame including the cost of rubber gasket / rubber beading rollers, maruti lock & F frame etc complete . But the weight of the rubber gasket / beading rollers, maruti lock will not be measured with weight of aluminium shutter Note :- Sheet glass & wire mesh shall be measured & paid separately and directed by the Engineer-in-Charge. |
| 46 | S&F door closer, heavy duty hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, fixed in repairs all as specified |
| 47 | Making down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover, and side brackets etc., wherever required. Item includes refixing the shutters in their original position after repairs. The scope is fully inclusive of all new replacement materials, tools, plant, and labor for greasing and servicing both old and new mechanical components. Item includes erection and dismantling of necessary scaffolding or staging at any height for safe working. Rate shall also include thorough surface preparation (scraping, wire brushing, and cleaning old paint/rust) followed by applying one coat of approved primer and two coats of approved epoxy paint to achieve a smooth, uniform finish. All work to be completed for shutters of an area not exceeding (n. exc) 30 sqm each, complete all as specified and directed by the Engineer-in-Charge. |
| 48 | Taking down cement plaster of stone /Pcc block /brick wall / top of chajja, or concrete surface of any description including raking out joints hacking for key securing down with water etc and removalof debris to outside of INS Mandovi Area including filling of open joints in cement mortar 1:6 Complete |
| 49 | M&L for Dubbing out average 15mm thick in CM 1:6 on irregular face of walls (when specifically rendered in writing) Please Enable Macros to View BoQ information |
| 50 | M&L for Dubbing out average 15mm thick in CM 1:6 on irregular face of walls (when specifically rendered in writing) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender