Tender For Day To Day Comprehensive Maintenance Alongwith Integrated Welcome Maintenance Including Em Fitting & Fixture Offrs Md Accn For Gfa, Ogfa, Ngfa, Thela Ground, Ovl, Nalwa Line, Bhagat Line, Outram Line, Usman Road, Nvl And Adjoining Area Und
Tender Value
1.03 Crore
Estimated cost
Bid Submission
11 Sep 2026
27 days left
EMD
1.78 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Comprehensive Maintenance Alongwith Integrated Welcome Maintenance Including Em Fitting & Fixture Offrs Md Accn For Gfa, Ogfa, Ngfa, Thela Ground, Ovl, Nalwa Line, Bhagat Line, Outram Line, Usman Road, Nvl And Adjoining Area Under Ge (West) Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | M & L brickwork with fly ash bricks, Modular bricks straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc. ,complete all as specified and directed. |
| 2 | M & L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar,complete all as specified and directed. |
| 3 | M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and plastering the wall surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish,complete all as specified and directed. |
| 4 | Repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish,complete all as specified and directed. |
| 5 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of Priming ,complete all as specified and directed. |
| 6 | M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint ,complete all as specified and directed. |
| 7 | M & L preparation of new surfaces of of ceiling and applying two coat of white wash on ceiling complete all as specified and directed. |
| 8 | M & L 1 mm thick weather proof putty on wall in two or more coats and smooth finished by sanding with mechanical sander complete all as specified and directed |
| 9 | Material & Labour for complete removal of existing treatment of walls preparation of old plastered surfaces of finished walls and applying Two coats of 100% Premium acrylic emulsion paint with PU serum, colour stay technology having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical means |
| 10 | M & L for preparation of old treated surface of ceiling and applying one coat of whitewash incl cleaning the old surface and removing the dust from the ceiling,complete all as specified and directed. |
| 11 | M & L for preparation of old treated surface of wall and applying one coats of oil bound distemper incl cleaning the old surface and removing the dust from the wall ,complete all as specified and directed. |
| 12 | M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper incl cleaning the old surface and removing the dust from the wall ,complete all as specified and directed. |
| 13 | M & L for preparation of old treated surface of ceiling and applying two coats of oil bound distemper incl cleaning the old surface and removing the dust from the wall,complete all as specified and directed. |
| 14 | M & L for preparation of old surfaces on wall surfaces and applying two coats of plastic emulsion paint incl cleaning the old surface and removing the dust from the wall ,complete all as specified and directed. |
| 15 | M&L for applying two coats of cement based paint incl cleaning the old surface and removing the dust from the wall ,complete all as specified and directed. |
| 16 | M & L for preparation of old wooden or wood based surface of any description exceeding 9cm width or girth and applying two coats of synthetic enamel paint ,complete all as specified and directed. |
| 17 | M & L for prepration of old treated steel surface of any description exceeding 9cm width or girth and applying one coats of synthetic enamel paint ,complete all as specified and directed. |
| 18 | M & L for prepration of new steel surface of any description exceeding 9cm width or girth and applying two coats of synthetic enamel paint over and incl a coat of red oxide primer,complete all as specified and directed. |
| 19 | M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151, two parts of cement by weight complete all as specified and directed. |
| 20 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 21 | M & L for premium quality joint free ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors / skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 22 | M & L for joint free glazed coloured GLOSSY tiles, superior quality of size 300 x 450 x 7 to 8mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 23 | M & L machine Cut Kota stone slab flooring 20-25mm thick over and including 15 mm thick screed bed in cement mortar 1:6 laid and bedded jointed cement slurry mixed with pigment to match to shade of the slab including grinding, mirror polishing including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | M & L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified |
| 25 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 15mm th in cement mortar 1:4 including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 26 | M & L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement including demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level ,complete all as specified and directed. |
| 27 | M & L for 50mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long, including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed. |
| 28 | Demolition of PCC (un-reinforced) in ground floors and pavings not exc. 15 cm thickness below or above ground levels complete all as specified and directed. |
| 29 | M & L hard core of broken stone gauage not exc 63 mm deposited spread and levelled n.exc 15 cm thick watered and rolled /rammed to a true surface ,complete all as specified and directed. |
| 30 | M & L cement concrete 75 mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate ,complete all as specified and directed. |
| 31 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 32 | M & L Chequered cement concrete tiles coloured PU mould 30cmx30cmx20mm thick, jointed and pointed in neat cement slurry with grey cement and no pigment set on 15mm thick cement screed (1:6) slurry and pointed incl white or colour cement to match complete including demolition of existing tiles including bedding etc ,complete all as specified and directed. |
| 33 | M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 34 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified & directed. |
| 35 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.00 Sqm each, ,complete all as specified and directed. |
| 36 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and and removal from site ,complete all as specified and directed. |
| 37 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed. |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 40 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed. |
| 41 | M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 42 | S & F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid glazed and skelton door shutter open rebated,prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed.(Note: Butt hinges shall be paid separately) |
| 43 | S & F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed. |
| 44 | Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick \\"D\\" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square guard bars with 6\\"(152.4mm) pitch, complete for finished item of work including of all taxes, design as per direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
| 45 | Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick \\"D\\" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square guard bars with 6\\"(152.4mm) pitch, complete for finished item of work including of all taxes, design as per direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender