Home Affairs Statutory Bodies & Commissions/Committees Closing in 5 days TDR #57010880

Tender For Construction of Type-Iii Qtr (01 Nos) For Oc Dollungmukh

Issued by Statutory Bodies & Commissions/Committees · Lower Subansiri, Arunachal Pradesh
Tender Value
53.80 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
5 days left
EMD
53800
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lower Subansiri → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction of Type-Iii Qtr (01 Nos) For Oc Dollungmukh

BOQ

Name of Work:- C/o Type-III Qtr (01 Nos) for OC Dollungmukh
Sl. No. Item Description
1Earth work in rough excavation,banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankd banks, marginal banks and guide banks filling up grounddepressions lead upto 50mm and lift upto 1.50m. Ordinary Soil
2Hard Soil/Ordinary Rock
3Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
4Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
5Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
6Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
7Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centering, shuttering and reinforcement in : 1 :1.5 :3 (1 cement : 1.5coarse sand : 3 stone aggregate 20 mm nominal size).a) M-20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
8Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.M-20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
9Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.M-20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
10Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M-20 1 : 1.5 : 3( 1 cement: 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
11Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1Cement : 1.5 Coarse Sand : 3 Stone Aggregate 20 mm nominal size).
12Brick work with best available local bricks in foundations and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
13Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete.
14d) Lintels, beams, girders, bressumers and cantilevers etc.
15e) Column, pillars, posts and struts etc.
16c)Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
17Reinforcement of RCC work including bending, binding and placing in position complete. a) Cold Twisted bars
18Providing and fixing MS grills of required pattern in wood frames of window etc with MS flat, Square or round bars with round headed bolts and nuts or by screw. B)Ornamental grill.
19Providing and fixing plain timber Door and steel angle 45x45x5mm fasten with steel strip of 25mmx4mm, including steel chowkat and necessary iron fittings and screws including painting with smoke grey paint two or more coat above priming coat.(35 mm thick)
20Providing and fixing Glazed window in steel frame of angle 45mmx 45mmx5mm in frame of 30x30x4mm fastened with bead/putty including steel chowkhat ,Gril& necessary fittings & screws as per design and drawing including painting with Red Oxide paints.
21Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
22Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
23Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. a) 40 mm thick.
24Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including Grouting the joints with white cement and matching pigments etc, complete. d). Size of tiles 1000 x 1000 mm.
25Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
26Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
27Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
28Neat cement punning.
2912 mm cement plaster 1 : 3 (1 cement : 4 fine sand).
30Finishing walls with wall putty of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. As directed by the Engineer incharge.
31Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.(both side as Direction by Engineer In charge)
32Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade.
33Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
34Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
35Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
36Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
37Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.a) Long Pan patten WC Pan
38Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.a) 75mm dia
39Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.(250mmX130mmx30mm)
40Providing,fixing and laying of PVC Pipe 110 mm for Sewage under ground and filled with CC 1:12 (1cement:12 MSS).
41Providing and fixing best quality PVC Elbow 110mm.
42Best quality PVC Connecting Pipe 110mm dia 30cm length.
43Providing and fixing 12.5 litres high level CI flushing cistern of approved make with intergral fittings such as ball valve, bell, lever, GI chain and pull Complete.
44Terminal Guard with Clamp(PVC)
45Construction of Septic Tank 3.8 mx2.8m x1.8m as per complete standard drawing & design.
46Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
47Construction of CC Junction Box 50cmX50CmX50Cm(overall) at every 6 m distance between the PVC pipe line including RCC cover complete.
48Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
49Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore
50Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 15 mm nominal bore(Internal)
51b) 20 mm nominal bore(external)
52Providing and fixing brass bib cock of approved quality.a)15 mm nominal bore
53Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore
54b) 20 mm nominal bore
55Providing ,Fixing ,commissioning & testing of 1 H.P. 1/2 Phase pump(SWJ 1 ) including control Panel and all accesories or as directed by Engg. i/c
56providing and fixing in position sintex of three/Four layer for water storage & supply etc
57Construction of Under Ground Water Tank of clear dimension (4.5x3x2)m with wall thickness of 230mm after plaster including GI Fittings and RCC Slab or as Directed by the engineer in charge.
58Manufacturing and supplying of wooden cot with, Moisquito stand and finishing with painting of approved brand or as may be directed by Engineer incharge.(Medium Size)
59Plastic Chair of premimum superim quality
60Writing Table Wooden With Drawel
61Water Filter 30 litre capacity
62Dining Table of good quality made of wooden/ plastic for 6 seater
63Dismantling Items:- Taking out door,window and clerestory window shutters(steel or wood) including stacking within 50 m lead.
64Dismantling doors, windows and clerestory windows (steel or wood) shutters including chowkhats, architrave, hold fasts etc complete and stcking within 50 m lead.b) Of area beyond 3 Sq.m. (Door)
65Dismantling wood work of sectional area 40 Sq.cm. and above wrought, framed and fixed in frames, other frames and trusses including stacking the material within 50 m lead.
66Demolishing cement concrete 1:4:8 or leaner mix including disposal of material within 50 m lead.
67Demolishing cement concrete 1:3:6 or richer mix including disposal off material within 50 metres lead.
68Demolishing RCC work including stacking of steel bars and disposal of un-serviceable materials within 50 metre lead.
69Dismantling GI sheet roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 m lead
70Dismantling cement,asbestos,celotax or other ceiling or partation hard board partation wall including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead.
71C/o Boundary wall: of 2 m high brick wall 150 cm thick Wall with RCC post(column) 20 cmX20 cm placed at every 3m centre to centre apart, provided with broken sharp bottle at the top including 2 Nos. horizontal beams of 20 cmx20 cm at ground level and at the top ,plastering with CM 1:3 at both sides,beams and column and also white washing with three coats i/c jungle clearance, earth works and all materias complete, as per standard Drawing & specification and as directed by Engineer in charge.
72C/O Steel Gate 4.5 mtr Length and 2 Mtr Height with MS angle frame 40 X 40 X 5mm embedded on RCC post 30 X 30 Cm complete as per drawing and direction of engineer incharge .
73Transportation charges for carrying of building materials: a) Cement
74b) Steel
75c) Bricks
76d) Aggragte
77e) Sand Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57010880
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 53.80 Lakhs
LAST DATE 20-08-2026
Authority
Authority Name Police Department
Work Description Tender for Construction of Type-Iii Qtr (01 Nos) For Oc Dollungmukh
Basic Detail
Tender No APH/EC/EE(W)/E-NIT/2025-26
Bidding Type Tender
Location
City Lower Subansiri
State Arunachal Pradesh
Key Dates
Publish Date 14 Aug 2026
Submission Date 20 Aug 2026
Open Date 21 Aug 2026
Finance
Tender Value 53.80 Lakhs
Tender Fee 3000
EMD 53800
Exemption Not Available
Document List
272287d3-e9fe-4098-8b62-20ac2718d0b6.html
BOQ_3866.xls
SBD_Dollungmukh.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Aug 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

272287d3-e9fe-4098-8b62-20ac2718d0b6.html

xls

BOQ_3866.xls

pdf

SBD_Dollungmukh.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders