Tender For repair maintenance E&M Services Installed At Trade & Tax Building Ito, Delhi-110002 (Sh:- Supply Installation Testing and Commissioning of Precision Type Air Conditioner In Ups Room.)
Tender Value
20.93 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
5 days left
EMD
41877
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenance E&M Services Installed At Trade & Tax Building Ito, Delhi-110002 (Sh:- Supply Installation Testing and Commissioning of Precision Type Air Conditioner In Ups Room.)
BOQ
| Sl. No. | Item Description |
| 1 | SITC of floor mounted high performance precision packaged cooling units suitable for high sensible loads of electrical panels. Each unit shall facilitate installation in Small Areas, shall feature robust design to run 24x7, Auto-Restart function, Monitoring with Unit-to-Unit Communication and Ease of service. The discharge of cold air shall be from top front and suction from lower front face.The Indoor unit shall comprise of Metallic Body construction, Scroll compressor, Evaporator Coil with Hydrophilic Coating, Evaporator fans, HDPE Washable Filters, Expansion Valve, R407c refrigerant, Heater, Humidifier, Microprocessor Controller, G4 Filter, Suction and Discharge piping, Internal power and Control wiring, HP/LP Cutouts, Power and Control contactors, RS485 card for monitoring, and Other Electrical & safety accessories. Outdoor cabinet consists of Fan with single phase motor and Condenser coil.The Air-cooled High Performanc AC unit shall be designed as per following conditions:• Inside Design condition : 23 Deg C ±2 Deg C and Max 50% RH • Ambient air design temperature : 43 Deg C• Actual Capacity : As per Requirement • Air Quantity : 500 to 600 CFM / TR • Filters Efficiency : 90% efficiency down to 10 Microns. •Type of load : High sensible heat load (Sensible heat factor above 0.90)Fault Failure changeoverCascading EffectSequencing of above UnitsSequencing of above UnitsMake of PAC- Vertive/ Emerson/ schinder 1.01) 12.5 KW |
| 2 | Low side accessories for Installation & Commissioning of Precision AC:-a) Supply and charging of refrigerant gas R-410a/R-407 for above PAC System. |
| 3 | b) Supplying and Interconnecting Copper piping between indoor & outdoor unit. Copper piping will be duly insulated with 13mm thick nitrile rubber insulation. Copper piping should be epoxy coated.(i) Supply and laying Hot gas line dia (3/4) & Liquid line( 1/2)-18 Guage Hard Copper with fittings, accessories etc for above PAC System. |
| 4 | c) Supply & Laying and Interconnecting Copper cable between indoor & outdoor unit to be laid on existing cable tray for above PAC System. |
| 5 | d) Supply & laying Incoming Copper Cable from Incoming Isolator to PAC Unit (4c x 6 Sqmm CU A) to be laid on existing cable tray. |
| 6 | e) Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.(a) 150 mm width X 50 mm depth X 1.6 mm thickness |
| 7 | Supplying and installing of drain pipe of 25mm/32mm dia pipe of PVC heavy duty with nitrile insulation as required. |
| 8 | Supplying, Installation, Testing and Commissioning of Air Cooled Floor standing Tower type split Air conditioners complete with Indoor unit(IDU), Out door unit (ODU),surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5 Mtr (IDU to ODU), copper power cable upto 5.5 Mtr (IDU to ODU), i/c drain pipe of suitable length and size. R-32/R-410/R-407C Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). as specified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per International Electrotechnical Commission (IEC) 17025 standards /Central Power Research Institute (CPRI)/ Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification and as per IS: 1391 as required. a) 3.8 TR BEE 5 Star Rating Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender