Tender For Providing And Fixing Of Badminton Court, Open Gym, & Children Play Equipments With Upgradation Of Existing Enterance Gate In Mayur Dhwaj Apartment, Krishna Nagar Constituency Ac-60.
Tender Value
27.80 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
3 days left
EMD
55612
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Badminton Court, Open Gym, & Children Play Equipments With Upgradation Of Existing Enterance Gate In Mayur Dhwaj Apartment, Krishna Nagar Constituency Ac-60.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size). |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 8 | Air Walker: Providing, designing and fixing of Air-Walker of size 1330 x 525 x 1420 mm fabricated with main post of 114 mm dia, and 4 mm thick and other pipes of 40 mm dia 4mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using Akzo Nobel or equipement in desired shade and color. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8 mm thickness, UV resistant and color as approved by Engineer-in-Charge. High quality grip rubber should be used on handles. Foothold shall be made of nylone alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipements manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-Charge. The equipement shall be fitted with in-built limiters. The equipement shall be fixed on ground with concrete of minimum strength M-25 and Base plate made of 330 mm dia with welded bolts and when concrete is set, fixing the equipement on to it and cover nuts and bolts with base cover which should be made of Virgin LLDPE , all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipement, colour ( of metal, seat and pedal), and fixing of equipement etc. ( the cement concrete and excavation work shall be paid seperately.( Make -Koomplan/ Koochie/ Hugo/ Arihnat/ grand Slam). |
| 9 | Double cross walker: Providing, designing and fixing double cross walker of size 1680 mm x 515 mm x 1780 mm fabricated with main post of 164 mm dia and 4mm thick and rest of the pipe 40mm dia and 4mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and Base plate made of 330 mm dia with welded bolts and when concrete is set, fixing the equipement on to it and cover nuts and bolts with base cover which should be made of Virgin LLDPE , All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc (the cement concrete and excavation work shall be paid separately). ( Make -Koomplan/ Koochie/ Hugo/ Arihnat/ grand Slam). |
| 10 | Push & Pull chair: Providing, designing and fixing of pull chair in a pair of size 2900 mm x 775 mm x 2060 mm fabricated with main post of 164 mm dia and 4 mm thick and rest of the pipe 40 mm dia and 4mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and Base plate made of 330 mm dia with welded bolts and when concrete is set, fixing the equipement on to it and cover nuts and bolts with base cover which should be made of Virgin LLDPE , All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately). ( Make -Koomplan/ Koochie/ Hugo/ Arihnat/ grand Slam). |
| 11 | Sit Up Station: Providing, designing and fixing of double sit-up station of size 1550 mm x 1400 mm x 650mm fabricated with main post of 164 mm dia and 4 mm thick and rest of the pipe of 40 mm dia and 4 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8 mm, colourfull and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and Base plate made of 330 mm dia with welded bolts and when concrete is set, fixing the equipement on to it and cover nuts and bolts with base cover which should be made of Virgin LLDPE , All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). ( Make -Koomplan/ Koochie/ Hugo/ Arihnat/ grand Slam). |
| 12 | Arm wheel: Providing, designing and fixing of arm wheel in a pair of size 1800 mm x 650 mm x 800 mm fabricated with main post of 114 mm dia and 4 mm thick and rest of the pipe 40 mm dia and 4mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and Base plate made of 330 mm dia with welded bolts and when concrete is set, fixing the equipement on to it and cover nuts and bolts with base cover which should be made of Virgin LLDPE , All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately). ( Make -Koomplan/ Koochie/ Hugo/ Arihnat/ grand Slam). |
| 13 | Twister: Providing, designing and fixing twister of size 1500 mm x 1500 mm x 1425 mm fabricated with main post of 164mm dia and 4mm thick and rest of the pipe 40mm dia and 4mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and Base plate made of 330 mm dia with welded bolts and when concrete is set, fixing the equipement on to it and cover nuts and bolts with base cover which should be made of Virgin LLDPE , All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc (the cement concrete and excavation work shall be paid separately). ( Make -Koomplan/ Koochie/ Hugo/ Arihnat/ grand Slam). |
| 14 | Elephant slide FRP animal Themed playground slide for kids outdoor play equipments for parks & school. |
| 15 | Providing and fixing of Two-seater see saw/ Standard see-saw (PGSS-12) of make Kompan/ Leo/ Koochie/ Hugo/ Arihant Item Descriptions• Product Area : 2.5m X 0.3m (8.2ft X 1ft)Technical Specification:•Frame:Frame of standard see-saw is designed using 15NB , 20NB & 25NB G.I. pipe and it has been given radius by suitable bending techniques Plates has been welded at places were seat has to be installed so that seats can be fixed to the frame with suitable bolting arrangement. •Roto Seat :Rotational molded seats of thickness 6mm areused in these see-saw , it has been provided with bolts to fix it too see-saw frame which has a plates of 200X150X5mm welded on to the frame. Handle has been provided on the frame made up of 20NB pipe and also conforming to EN standards.The Multi Seater See saw comprises four roto seats. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •See-saw stand : 50NB Hot dip Galvanized Pipe with GI thickness of 60μ ,Pipe length 550mm Plate 150X150X5mm is used as a foundation plate for the vertical pipe. •Standard See-saw Clamp: Standard see saw clamp is used in see saw so as to provide required motion for the see saw. •Bearing:The bearing used in this item is heavy duty nylon bush type •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates. |
| 16 | Providing and fixing of Merry Go Round/ Four-Seater MGR (PGMR 05) of make Kompan/ Leo/ Koochie/ Hugo/ ArihantItem Descriptions• Product Area : 2.1m Dia (7 ft Dia.)Technical Specification:•MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the ROTO/FRP Seats over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. •Seat frame :20NB GI pipe bend and joint to form a frame structure with flat plate to mount seat. The frame is bolted to the MGR frame outer end. The frame is provided with spacers for foot rest. Hand Grip conforming to EN1176-1:1998. •Bearing assembly :Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement. The whole structure is mounted on heavy-duty bearing shaft. •Center suppor : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 40-60μ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top for assembling the bearing. •Seat :MGR seat is made up of Fiber reinforced plastic(FRP)/LLDPE. Seat designed to accommodate one child per seat with backrest; The seat is bolted to the assembly with special structure. •FRP Product :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 40-60micron. •Powder coating: it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO 9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates |
| 17 | Providing and fixing of A Swing/ Double Arc Swing (PGSW02) of make Kompan/ Leo/ Koochie/ Hugo/ ArihantItem Descriptions • Product Area : 3.2m x 1.5m (10.5ft x 5ft) Technical Specification:•Arc swimg frame :6000mm long 80NB Pipe bent in Single Piece & welded together with a flange 5mm thick & ISA of 40x40x5mm to form a strong frame. The 80NB pipe is hot dip galvanized pipe with GI thickness of 60μ. Height of the frame is 2700mm. •Top pipe : 50NB Top Pipe with two Arc Swing Flanges welded at both its ends. Pipe can withstanding torsional stress created due to swinging motion. 50NB top pipe is hot dip galvanized pipe of length 2950mm with GI thickness of 60μ. •Seat assembly : 1) Swing clamp assembly :Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin.The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are from injection molded Nylon-6 plastic. 2) Chain :Rubber dip molded swing chain of dia. 6mm & 1450mm Long. 3) Hook :S-Hook of dia 8mm & 145x130 Triangular hook of Grade SS 304. 4) Seat :Rubber Seat made by Natural Rubber with sufficient reinforcement. •Powder coating : It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Bearing: Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. •Pins and Circlips: 12mm diameter pins shall be made from EN8 material & Circlip A10. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate:ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. Transportation also included in the rates. |
| 18 | Providing and fixing of Balancing Bridge (PGTH 03) of make Kompan/ Leo/ Koochie/ Hugo/ ArihantItem Descriptions• Product Area : 7.3m X 0.8m (24ft X 2.6ft)Technical Specification:•Side frame :40NB & 25NB hot dip galvanized pipe with GI thickness of 60μ fixed together with base plates at bottom end to form balancing bridge side frame •Top pipe : 50NB pipe is hot dip galvanized pipe of height 4830mm with GI thickness upto 60μ with an ISF conforming to IS 1730-1961 welded at its one ends pipe can withstand torsional stress created due to swinging motion•Support pipe :40NB hot dip galvanized pipe of length 2160mm with GI thickness of 60μ with base plates at bottom end to form balancing bridge support structure. •Floats :Eight Floats of dia 600mm dia is made from rotational molded LLDPE plastic suspended over two parallel MS wire of dia. 12mm 15.5ft. long. The material used is LLDPE plastic with UV stabilizers for prolong outdoor application.•Rope :Polypropylene (PP) braided Rope of dia 18mm suspended between two sides frames for children to hold grip for support against falling. Rope size conforming to standards minimum grip requirement EN 1176-1:1998. •Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately) TERMS & CONDITIONS: - GST included in the rates. |
| 19 | Providing and laying interlocking tiles on smooth CC Base, Size 30.48 x 30.48 x 1.58 cm 10.75 Pcs = 1Sqm; material weather resistance PP, weight 320G/PC (+/- 3%), surface shape HEXAGONAL Grid, Double layer provide space for water Drain and dust through floor, staple 6 locker each side to interlock the flooring around , fire rating Ul94Hb UV resistance : NO fade and abrasion in 10 years Certified by ITF 5, FIBA Approved The company should be ISO9001 ISO14001 and OHSAS 18001, CE(EN14904:2006) Certified (Colours combination as approved by Engineer in charge) (Badmointon, Vollyball, Basket ball & Skating etc. ) |
| 20 | Supply of cotton base badminton net of size 0.75 X 6.10mtr in required color and standard shape with all necessary fixtures. |
| 21 | Supply of multipurpose M.S pole for badminton/volleyball duly painted in a pair (two in one type) made out 50mm. dia heavy duty pipe along with base socket in a pair heavy duty type of size 450 X 450x3.0mm including all necessary fixtures fittings.easy moving on 2 Double PU Wheels which are non marking braned wheels to help protect floors |
| 22 | Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 35 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%),, Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) Charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install. Operating temperature range: -35 to 60 deg C With Lithium-Iron Phosphate Battery (LiFePO4) 3.2Volt (Cell) 35 AH battery, charging time 8-10 hours, Battery backup time 12 hours (minimum), LED fixture watt 35 watt, Input voltage: 12V DC, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-08, CRI >80 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPR 15 , lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K /6000°K (As per American National Standard Institute (ANSI Bin)), life time (LED, Driver & electrical circuitry) of 50K hours lamp burring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic switch on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output All as per pre approved by Engineer in-charge complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required. (Part 1), for fixtures up to 60 watt. LED light Complete with mounting structure for the battery and accessories and wind storm withstand capacity as per the zone. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise aboven 90°C) 35 Watt (System lumen efficacy >120 lm/Watt) ((make Bajaj/Volmont/Phillips/Lysaght) |
| 23 | Supplying and fixing of 4 Nos , 20mmx700mm long GI foundation bolt (EN 8 grade) with nuts washer including 2 Nos. template of 3 mm thick size 200mmx200mmx12mm thick with 4 Nos 16mm dia holes to match with PCD of poles base plate as required (make Bajaj/Volmont/ philips/ Lysaght) |
| 24 | Fabrication supplying and erection of flange mounted hot dip Galvanized octaqgonal Poles of 5 Mtr. Height made fr 3mm thick steel plate having bottom Dia of 130 mm & top Dia of 70mm complete and galvanization base plate of size 200mm x 200mm x12mm thick on existing cement concrete pedestal as per direction of Enginer-in-charge completed etc. as required |
| 25 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.\\" |
| 26 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes. |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 29 | Providing and fixing stainless steel 304 grade hollow letter/ alphabet of required matter and size as per the directions of engineer in charge.The stainless-steel letter made out 22 SWG stainless steel 304 grade sheet having minimum depth of 24mm welded with seamless welding process by argon welding along with necessary fixing arrangement like screw, nuts, studs etc. Complete item to be finished with buffing and polishing. |
| 30 | Supplying of fixing of victorian garden bench , both sides of garden bench are made of flora cast iron having back height of minimum 700mm and minimum seating height of 375mm and both sides of garden bench is connected with M.S. tube of 65 mm x 25mm seat angular tube having width of 15.20mm in 10 Nos. for seating purpose with extra support 25mm x 5 mm M.S flats for extra stability all sharp and rough edges of bench are to be grinded with grinder and all fill up with M.S. seal where is it required necessary this bench is having the provision of hold fast system of for growing bench is complete with a cutting Ist class quality paints finally bench is assembled with nut and bolt including all tax. The length of bench be 1500mm and minimum overall weight is not less than 90 kgs. Fitting and transporation at site. |
| 31 | Providing and fixing of 2mm thick 0.30 x 0.15mt. Stainless steel plates on benches with name of Hon'ble area MLA and tighted with aluminium riviting and SS welding on existing benhces. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender