Tender For Construction Of Washroom Near Jamia Masjid Sharief Aul Ward No 5 Pyt Ugad Block Dali Udhyanpur (Ddc Grant)
Tender Value
2.42 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
4854
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Doda → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Washroom Near Jamia Masjid Sharief Aul Ward No 5 Pyt Ugad Block Dali Udhyanpur (Ddc Grant)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand |
| 6 | Extra for Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in in supersttructure above plinth and upto floor five level including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 7 | Half brick masonary in (1:4) mix cement mortar for superstructure up to floor Vth level. |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. (a) Foundation and footings |
| 11 | (b) Suspended floors and soffits of slab. |
| 12 | (c) Edges of slabs. |
| 13 | Providing and applying 6mm thick cement plaster in 1:3 mix mortar excluding cost and carriage of materials |
| 14 | Providing and fixing including wiring for light point/fan point /exhaust fan point /call bell point with 1.5 sqmmFRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1,5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required. (Group A) |
| 15 | Providing andfixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS; 13592 Type B including jionting with seal ring conforming ti IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes 75mm diameter. |
| 16 | Providing and fixing PTMT bib cock of approved quality and color.15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15mm nominal dia pipes. |
| 18 | Providing and fixing PTMT stop cock of approved quality and color.15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 19 | Providing and fixing PTMT pillar cock of approved quality and color.15 mm nominal bore, 107 mm long, weighing not less than 110 gms. |
| 20 | Providing and fixing ball valve (brass) of approved quality. High and low pressure with plastic float complete 25mm nomonal bore. |
| 21 | Providing and fixing un plasticized PVC connection pipe with PTMT nuts, collers and bush of approved quality and colour, 15mm nominal bore with 45cm length. |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank . |
| 23 | Providing andfixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS; 13592 Type B including jionting with seal ring conforming ti IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes 110mm diameter. |
| 24 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 25 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White |
| 26 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Angle back wash basin of size 600x480 mm. |
| 27 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia |
| 28 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. |
| 29 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces |
| 30 | Colour washing such as green, blue or buff to give an even shade on new work wit two or more coats over base coat of whiting. |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade with two or more coats on new work. |
| 32 | Cement concrete flooring in 1:2:4 (1cement:2course sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curring complete. 25mm thick with 12.5mm nominal size of stone aggregates. |
| 33 | Carriage of Sand and aggregatesav |
| 34 | Carriage of Brick |
| 35 | CIB (citizen information Board ) size 4'0\\"x5'0\\"x0'9\\" (above plinth level) with tepered top having 20 degree slope in Brick Masonary(1:4) including plaster , paint, lettering and logos as per instruction of Engineer -in-charge including carriage of material. ( complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender