Tender For Restoration Of Rain Damages Gwss Badmaindhar In Gp Neen, Tehsil-Sunni Distt. Shimla (H.P)(Sh- Providing,Laying And Jointing Of Pipe Line,C/O Storage Tank 15000 Ltr & 10000 Ltrs Capacity)(Under Pdna)
Tender Value
12.56 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
4 days left
EMD
25500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Gwss Badmaindhar In Gp Neen, Tehsil-Sunni Distt. Shimla (H.P)(Sh- Providing,Laying And Jointing Of Pipe Line,C/O Storage Tank 15000 Ltr & 10000 Ltrs Capacity)(Under Pdna)
BOQ
| Sl. No. | Item Description |
| 1 | Description |
| 2 | Excavation in foundations, trenches etc. in earth work, lift up to 1.50 mtrs. stacking the excavated soil not more than 3 mtrs. clear from the as of excavation and then returning the excavated soil in 15 cm. layers when required into plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 20 mtrs.- P-J Work. |
| 3 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in:- |
| 4 | Foundation and Plinth |
| 5 | Providing and laying cement concrete 1:1.5:3 ( 1 cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:- |
| 6 | Foundation and Plinth |
| 7 | ii) Walls (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. |
| 8 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in : |
| 9 | Flat surfaces such as soffits and suspended floors,roofs,landing and the like:- |
| 10 | Vertical surfaces such as walls ( any thickness ) partitions and the like including attached pilasters , buttresses, plinth and string courses and the like . |
| 11 | Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 12 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels. |
| 13 | Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level. |
| 14 | Applying Birla White wall care Putty over plaster surface after throughly brushing the surface free from mortar drops , dust , loose , materails and other to give matters sand parpered smooth to give final matter finish to the surface complete. |
| 15 | Manfacturing MS Manhole Cover 600x450mm with Frame of MS Angle 50x50x6mm and cover of black sheet 2.00mm thick complete with angle frames, flates etc including welding with locking arrangemets(Locks) (excluding Cement Concrete) |
| 16 | Providing,Laying and Jointing in trenches GMS Tubes (Light Grade) Tube fittings (Earth work in trenches to be measured and paid for saprately) |
| 17 | 32 mm dia |
| 18 | 25 mm dia |
| 19 | 20 mm dia |
| 20 | Providing and fixing of Brass full way wheel valve 40 mm Dia |
| 21 | Providing smooth finishing in cm 1:3 |
| 22 | Steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position complete in grating, framed guards & ladders etc.(V.m 40x40x5 mm & H.M. 25x25x4 mm ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender