Tender For Repair And Renovation Of Promenade At Ramachandi Temple, Konark
Tender Value
16.93 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
7 days left
EMD
16930
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Promenade At Ramachandi Temple, Konark
BOQ
| Sl. No. | Item Description |
| 1 | Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 2 | Providing 20mm thick and above 0.40 Sqm size granite tile flooring in platform, staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 3 | Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 4 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) (inside) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge. |
| 5 | Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 6 | Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. |
| 7 | Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in floor/stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect as directed by the Engineer in charge. |
| 8 | Electrical Works |
| 9 | Supply, Instalaltion,Testing & Commissioning of 970mm High 24W Bollard Light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Model No.24778 Make-K-Lite |
| 10 | Supply, Instalaltion,Testing & Commissioning of 6W Step Light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Model No.22747 Make-K-Lite |
| 11 | Supply, Instalaltion,Testing & Commissioning of 30W LED Post Top Light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Model No.25000 A10 Make-K-Lite |
| 12 | Supply, Instalaltion,Testing & Commissioning of 30W LED Boundary Top of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.Model No.24849 Make-K-Lite |
| 13 | Supply, Instalaltion,Testing & Commissioning of 50W LED Street Light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Model No.-24391 Make-K-Lite |
| 14 | Supply, Instalaltion,Testing & Commissioning of 90W Street Light of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Make-Havells, Philips, CG & Bajaj |
| 15 | Supply and fixing of 6 sqmm x 3c Copper cable of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 16 | Supply and fixing of 2.5 sqmm x 3c cop flexible including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 17 | Supply and fixing of 35 x 3.5c AL armd including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 18 | Supply and laying of 4 core 16 sqmm armoured alluminium cable including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 19 | Supply and Instalaltion of 3 Pole Power Contactors Model- MNX 32 Make- L&T including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 20 | Supply and Instalaltion of Digital Time Switch 240VAC Astro Pro+ Make- GIC including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender