Tender For Addition Alteration To Certain Omqs (Status Pool) At Afa
Tender Value
36.59 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
18 days left
EMD
73916
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Certain Omqs (Status Pool) At Afa
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete or surkhi filling of any description and in any position not otherwise specifically provided for Roof treatment treatment etc complete all as specified and as directed. |
| 2 | M&L Cement concrete type B-1 1:2:4 (20mm graded aggregate) in roof padding concerte of average 50 mm thick with liquid water proofing compound as per manufacturers instructions etc complete all as specified and as directed. Note: WPC will be measured & paid separately under relevant Item |
| 3 | M & L Cement concrete type B-0 1:2:4 (12.5mm grades aggregate) in haunching concrete etc complete all as specified and as directed |
| 4 | M&L for Rendering 10mm thick in cm 1 : 3 mixed with liquid water proofing compound as per manufacturers instructions on concrete surfaces when PCC on roof surface is still green including finished even and fair etc complete all as directed. Note: WPC will be measured & paid separately under relevant Item |
| 5 | Cleaning the roof surfaces and applying oil bound bitumen primer @0.20 Kg per Sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 140 Degree centgrade, lengitudinal tensile strength not less than 800N per 5 cm teasing strenght of 180N with minimum of 10 cm side laps and 15 cm end laps by application of torch. Applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg/sqm as per manufacturer instructions complete as directed |
| 6 | M&L for applying one coat of solar reflective bituminous Aluminium paint over a surface of APP water proofing membrane @ 0.1 Kg/Sqm etc complete all as specified and as directed. |
| 7 | Removal of debris (Aggregates) obatained from demolition including loading and unloading to a distance of 5km from the starting point and deposited where directed etc complete all as specified and as directed. |
| 8 | M&L for Removing of plants including roots by dismantling of brick work/PCC/RCC including necessary scaffolding , any type , any location/height( roof, parapet walls near pipes etc) and spraying the affected area with solution of 25ml Glyphosphate (4% content) diluted with 1 litre of water or as per manufacturer's instructions after removing roots from wall slabs for preventing the regrowing and making good the disturbed portion using PCC 1:2:4 type B-0 with 12.5mm graded aggregate and plaster in CM 1:3 (Size of the disturbed portion 150X150X150mm) etc complete all as specified and as directed. |
| 9 | Cutting out V groove on cracks of walls and cleaning out, wetting, grouting with crack filler (Dr Fixit or equivalent) mixing with cement slurry, making good the surface by using CM 1:3 or PCC 1:2:4 type B-0 as required at site, as per manufactures instuctions, of any description and in any position, with necessary scaffoldings, as approved by Engr in charge |
| 10 | M&Lfor laying PCC (1:2:4) type B-2 using 40 mm graded aggregate in floors/sub base of 50 mm average thick for etc finished fair and even etc complete all as specified and directed. |
| 11 | M&L for 40 mm dia GI pipe as spouts in sunken floors, medium grade etc complete all as specified and as directed |
| 12 | Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and directed. |
| 13 | M&L for Roughening surfaces of old concrete floor by picking, hacking for keys, sweeping clean and washing down with water to remove dust, etc. for preparation for tiling complete all as specified and as directed |
| 14 | S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick of size 600 mm x 600 mm (square) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including Screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed.complete all as specified and as directed. |
| 15 | M&L for glazed ceramic tiles coloured of size 600 X 300 X 6 to7 mm thick as on walls over jointing in neet slurry and pointing in coloured cement to match the inside of tiles including 10mm thick backing plaster in cement mortar (1:3) complete all as specified and directed. |
| 16 | M&L light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and ointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed. complete all as specified and directed. |
| 17 | S&F light shade Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), in skirting including 10 mm thick plastering in CM 1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 18 | S & F machine cut kota stone slab flooring 20-25mm thick overcement screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 19 | S & F kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including 10 mm thick plastering in CM 1:3 etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 20 | Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar . |
| 21 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 22 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 23 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided fo complete all as specified and directed. |
| 24 | M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), set in cement mortar 1:4 as in kitchen flat form and shelves in kitchen slabs, landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, with plain faces etc complete all as specified and directed. |
| 25 | M&L for MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. |
| 26 | Taking up or down 15mm bore of pipe PVC/steel tubing and connections, including for refixing or removal and disconnection of fiittings etc complete all as specified and directed. |
| 27 | Taking up or down 20mm bore of pipe PVC/steel tubing and connections, including for refixing or removal and disconnection of fittings etc complete all as specified and directed. |
| 28 | S&F of 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 29 | S&F of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 30 | S&F in repairs of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6kg/cm2 fixed complete to walls or laid in floors complete all as specified and directed. |
| 31 | S&F in repairs of Vitreous china squattig pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including trap set and connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and directed. |
| 32 | S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. |
| 33 | S&F in repairs of Vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc complete all as specified and directed. |
| 34 | S&F in repairs Plastic water closet seatcover, black, closed pattern with flat bottom. and cover and mild steel chromium plated or aluminium hinged device etc complete. |
| 35 | Supply only of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed. |
| 36 | S&F in repair of Central hole pillar cock with aerator 600 mm braided connection pipe (without pop-up) complete all as specified and diected. Cat Part No F1025101 Make of CERA or its equivalent. |
| 37 | S&F in repair of Sink mixer (wall mounted) with 190 mm (7.5\\") long swivel spout, connecting legs and wall flanges all as specified and diected. Cat Part No ##F1015501 Make of CERA or its equivalent. |
| 38 | S&F of CP Bib fancy type taps 15mm bore cast copper alloy with capstan head fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 39 | S&F Wall mixer 15mm bore dia with bend pipe for overhead shower complete all as specified and directed. Cat Part No F2014401 Make of CERA or its equivalent. |
| 40 | S&F of Angle cock of 15 mm dia wall flange complete all as specified and directed.Cat Part No F8040204 Make of CERA or its equivalent |
| 41 | S&F of 2 - Way angle cock with wall flange complete all as specified and directed.Cat Part No F2014211 Make of CERA or its equivalent |
| 42 | S&F of Gun metal globe or gate valves/ Non returning Valve of 20mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed. |
| 43 | S&F in repairs of PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets and long flush band etc complete all as specified and directed. |
| 44 | S&F in repairs of Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms) etc complete all as specified and directed. |
| 45 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm etc complete all as specified and directed. |
| 46 | S&F in repairs of PVC connection 15mm size with brass CP nuts of length 600 mm complete all as specified and directed. |
| 47 | S&F in repairs of brass chromium plated towel rod 600mm long \\"D\\" type fixed with suitable steel screw etc complete all as specified and directed. |
| 48 | S&F in repairs Soap dish, stainless steel and fixed to wall complete all as specified and directed. |
| 49 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 50 | S&F in repair Stainless Steel Dish/plate Display Rack of size 750x600x250mm, made with 0.63mm thick stainless steel sheet, fixed to walls with rowel plugs amd brass screws at suitable places, etc complete all as specified and as directed. Make: Prayag, or Silver shine, or any Equivalent |
| 51 | S&F in repairs glass corner/ mirror shelves size 300/450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and directed. |
| 52 | S&F in repairs of stainless steel grating 100 mm dia without hole complete all as specified and directed. |
| 53 | S&F in repairs of stainless steel grating 100 mm dia with hole complete all as specified and directed. |
| 54 | S&F in repairs of 600x450 mm bevelled adge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wdn plug with cromium plated brass screws and cup washers atc complete all as specified and directed by Engr -in- charge. |
| 55 | S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and directed. |
| 56 | S & F in repairs of Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 500 ltrs complete all as specified and directed. |
| 57 | S & F in repairs of Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 500 ltrs complete all as specified and directed. |
| 58 | S&F for 125 mm CP shower rose, fancy type with CP arm, all as specified and as directed |
| 59 | S&F in repair of Cast iron Nahani trap of 75mm size with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), including taking down existing of any description etc complete all as specified. |
| 60 | S&F in repair of Cast iron floor trap of 100 mm size with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), including taking down existing of any description etc complete all as specified. |
| 61 | Supply and fix in repairs Salt glazed stoneware gully trap, P type 150x100mmmm, including taking down existing of any description etc complete all as specified and as directed. |
| 62 | Taking down plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 63 | Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed. |
| 64 | M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed. |
| 65 | M&L for plastering in internal wall surfaces of 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 66 | M & L for External rendering 15 mm thick cement plaster in CM 1:4 in two layers 5mm thick with liquid WPC as per manufacturers instruction over 10 mm thick on fair faces of brick work or concrete surfaces in roof parapets at any height with neccesary scafoldings, finished even smooth without using extra cement (WPC will be measured & paid separately under relevant Item) |
| 67 | M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces as ceilling finished even and smooth (without using extra cement) complete all as specified and directed. |
| 68 | Supply only Liquid water proofing compound. |
| 69 | M & L for two coats of oil bound distemper on newly plastered surface of walls applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 70 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats white wash etc. complete all as specified and directed |
| 71 | M&L for preparation of newly plastered surfaces of external walls and applying Two coats of exterior weather proof paint over a coat of primer including mixing with Anti-fungal chemical as per the manufacturer’s instructions including preparation of surface complete all as specified and directed. |
| 72 | M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 73 | M & L for preparing old plastered or unplastered surfaces on ceilings including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge. |
| 74 | M&L for complete removal of existing treatment of any description and applying Two coats of exterior weather proof paint over a coat of primer including mixing with Anti-fungal chemical as per the manufacturer’s instructions including preparation of surface complete all as specified and directed. |
| 75 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed |
| 76 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed |
| 77 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed. |
| 78 | S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 79 | S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works confirming to Fe-290. Gde-E-165 complete all as specified and directed. |
| 80 | S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed |
| 81 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and directed |
| 82 | S&F pressed steel frames (size 105x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 83 | S&F pressed steel frames (size 125x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 84 | M&L for providing plain cement concrete 1:3:6 Type C-0 (using 12.5mm graded stone aggregate) as in filling hollow of pressed steel frame. |
| 85 | S & F 35 mm thick second class hard wood, Flush shutters, solid core construction, with block board core and plywoodface panels, commercialmtype on both sides complete all as specified and directed. |
| 86 | S& F 35mm thick glazed and Skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc. edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass/ gauze. Note: glazing/ gauzing will be measured separately |
| 87 | S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 88 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. |
| 89 | S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified. |
| 90 | S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long. |
| 91 | Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but n. exc one brick all as specified |
| 92 | S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate and complete all as specified. |
| 93 | S&F 150 mm long floordoor stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified |
| 94 | S & F sheet glass of 5.50mm thick selected quality in square and exceding 0.5 Sqm in each pane. |
| 95 | S & F frosted glass of 5.50mm thick selected quality in square and not exceding 0.5 Sqm in each pane. |
| 96 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 97 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed. |
| 98 | M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 99 | Dismantling boarding of any description, fixed in any position fixed with nails |
| 100 | M&L in repair 2nd class hardwood Plain fillets (50x50) Exc 13 & n.exc 25 Sq.cm, square, rectangular or triangular in section, clean sawn, secured with screws or nails or brads complete all as specified and directed. |
| 101 | M&L block boards 18/19mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work all as specified. |
| 102 | M&L block boards 12 mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work all as specified. |
| 103 | S/F of Brass handles, cast type, polished bright fixed with nut , screw and washer of mild steel , bright finished |
| 104 | S/F of Stainless steel butt hinges 75 mm long wih screw |
| 105 | S&F standard quality magnetic catcher for cupboard shutters. |
| 106 | M&L 18mm thick Marine plywood of First Grade (A) , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works, etc all as specified and as directed.. |
| 107 | M&L 12mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works, etc all as specified and as directed.. |
| 108 | M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified. |
| 109 | S&F Stainless steel wire (6mm) modular kitchen basket set (6 trolley) with corrosion resistance, durable and seamless glossy finish used in modular kitchen cabinets & drawers.Make: Steel gold or equivalent approved by GE.Set Content:-a) 21\\"x20\\"x4\\" (Perforated Cutlery) - 1nosb) 21\\"x20\\"x4\\" (Saucer basket) - 1 nosc) 21\\"x20\\"x4\\" (plian/cutlery Basket) - 1 nosd) 21\\"x20\\"x6\\" (plian/cutlery Basket) - 2 nosd) 21\\"x20\\"x8\\" ( Perfortred cutlery) - 2 nose) 21\\"x20\\"x8\\" (modern Thali Basket) - 2 nosf) 20\\" Telescopic Channel (Heavy) - 9 Sets |
| 110 | S&F Auto concealed Cabinet Hinges, full overlay of size 103 x 64mm etc all as specified and as dierected. |
| 111 | S&F Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc all as specified and as dierected. |
| 112 | S&F Magnetic catcher with plate, glosy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as dierected. |
| 113 | Cutting chases for concealed water tubing in Brick or stone walls or concrete surfaces and making good to facings where required and pointing in cement mortar 1:3, cutting not exc 10 cm girth etc complete all as specified and as directed. |
| 114 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level, etc complete all as specified and as directed.. |
| 115 | Material and labour 75 mm thick plain cement concrete 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection etc., finished even and smooth without using extra cement complete all as specified and as directed. |
| 116 | Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 117 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 118 | Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge. |
| 119 | NOTE for Item Nos 116 to 118 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates. |
| 120 | M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade), ISI marked with all fittings and accessories, PVC Clamps etc. ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes, Modular White Cover Plates with frames of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex/KEI, Make of Conduit : Precision/Finolex/Polycab/Modi |
| 121 | (a) One Light/E/Fan/Call Bell etc. point controlled by one switch 5/6 Amps. |
| 122 | (b) One light point controlled by two, two-way switches. |
| 123 | (c) One C/fan point controlled by one switch 5/6 Amps. |
| 124 | (d) One switch socket outlet point 5/6 Amps on independent board. |
| 125 | (e) One switch socket outlet point 5/6 Amps on same board. |
| 126 | Description all as per Item No-119 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. Please Enable Macros to View BoQ information |
| 127 | Description all as per Item No-119 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender