Tender For Maintenance To Godibali To Sankarada Road In Kashipur Block For The Year 2026-27.
Tender Value
46.61 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
5 days left
EMD
46610
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance To Godibali To Sankarada Road In Kashipur Block For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by machanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 & clause 305 of MOSRT & H specification including Royalty, DMF, EMF & Additional Charges charges and cost of all materials labour charges,machineries, T&P Cess etc required for the work complete as per direction of E.I.C |
| 2 | Construction of granular sub-base by providing stone screening, spreading in uniform layer with mortor graded on prepared surface, mxing mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density etc. complete as per clause 401 of MoSRT&H specification for road and bridge work (4th revision) including cost conveyance and Royalty, DMF, EMF & Additional Charges of all materials with all labur T&P Cess etc complete and as per direction of Engineer-in-Charge. |
| 3 | Providing,laying,spreading and compacteing graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site,laying in uniform layers with paver in sub-base/base couece on well prepared surface and compacting with vibratory roller to achieve the desirde density.with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge. |
| 4 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H Specifications for Road & Bridge works (4th Revision) etc. complete, with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 5 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) etc. complete, with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 6 | Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen,transporting the hot mix to work site,layingwith a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specification for road & Bridge works (4th Revision) with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge. |
| 7 | RCC CulvertEarth work in excavation in foundation in hard soilincluding hard moorum, stony earth mixed with boulders (except sheet rock & boulders requiring blasting) with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads & lifts including cost of all labour, Cess & T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge. |
| 8 | Providing & filling manualy with aproved quality of sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance, Royalty, DMF, EMF & Additional Charges , of all materials and cost of alllabour & T&P as required for the item of work including Cess etc complete as per specification & direction ofEngineer-in-charge. |
| 9 | Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance Royalty, DMF, EMF & Additional Charges , labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge |
| 10 | Providing and laying plain cement concrete of M-15 of controlled qualityhaving a minimum compressive strength (in work test) of 150Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using hard crusher broken granite materials of 40mm size and down graded consistence with strengthof approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyanceroyalitteisand of all materials and labour with T&P & Cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. |
| 11 | Providing and placing in position of cement concrete of (1:1½:3) for P.C.C / R.C.C work using 12mm size HBG chips including hoisting and laying etc. complete with all Royalty, DMF, EMF & Additional Charges, labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 12 | Providing and supplying of HYSD bars confirming toapproved grade including straightening cutting bending bindiing lapping , welding etc confirming to ISI specification) & jointing if neCessary by lapping & tying the grills &placing in position as required for RCC works as per the approved design placing the grills in position including cost & conveyance of tor steel & binding wires of 18 to 20 guage including Cess etc complete as per the specifiction and direction of Engineer-in- charge |
| 13 | Providing form work with F1 finish for upstream faces of dam, spillway, glacis of barrages, unexposed surfaces of foundation, block joints etc. with steel shutters rigidly fixed and removal of forms and making good to the surfaces where necessary complete including cost of all materials etc. complete in ground floor with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 14 | Providing weep holes in brick masonry / plain / reinforced concrete abuttments, wing walls / return walls with 100mm dia A.C pipe etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 15 | Providing & laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm with 40mm metal providing over the entire surface behind abutment, wing wall, return wall etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 16 | Providing rough stone dry packing in approns and revetments with Stone other than granite picked up, broken and staked above 0.003 Cum including cost conveyance of all materials to site, with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender