Tender For Maintenance To Pwd Road To Kulijingi In Rayagada Block For The Year 2026-27.
Tender Value
46.61 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
5 days left
EMD
46610
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance To Pwd Road To Kulijingi In Rayagada Block For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and shrub jungle and uprooting stumps and small bushes and tree below 0.3M on premeasurement removal of rubbish on both sides of the road to facilitate widening of berms, disposal of the stuff including all labour, T&P, Cess, articles required for the work etc. complete and direction of the Engineer-in-charge. |
| 2 | Clearing the existing black topped surface with removal of foreign materials with brooms or soft brushed and finally dusting with old gunny bags and /or compressed air to receive bituminous including all labour, T&P, Cess articles required for the work etc complete as per direction of Engineer-in-charge. |
| 3 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material with in all lifts and lead upto 1000 Meters including all labour T&P,Cess, articles required for the work etc complete as per direction of Engineer-in-charge. |
| 4 | Providing & laying 75mm compacted thickness of WBM specification with following size of IRC graded metal of approved quality from approved quarry and spreading on the road surface uniformly metal to specified thickness and hand packing the voids with small stones to proper camber and grade conveying moorum from stacks stacked at work site or at approved stacking yard including labour charges of moorum spreading over the metal surface filling the interstices of metal and consolidation with three wheeled steel Roller 8 to 10 tonnes in stage of proper grade & camber & turfedging including hire and running charges of Roller and all other machineries including all labour, T&P and cost, conveyance Royalty, DMF, EMF & Additional Charges & of all materials required for the work with Cess etc complete in all respect as per specification and direction of the Engineer-in-charge.IRC Gr-III Metal |
| 5 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MORD Technical Specification Clause 502 for low porosity surface and as per direction of Engineer-in-Charge. |
| 6 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD & as per direction of Engineer-in-Charge. |
| 7 | Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen,transporting the hot mix to work site,layingwith a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specification for road & Bridge works (4th Revision) with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge. |
| 8 | Construction of enbankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by machanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 & clause 305 of MOSRT & H specification including Royalty, DMF, EMF & Additional Charges charges and cost of all materials labour charges,machineries, T&P Cess etc required for the work complete as per direction of E.I.C |
| 9 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 and as per the direction of the Engineer in charge |
| 10 | Supplying & installing of mearsurement stones with cement concrete (1:1.5:3) using 12mm size chips including cost convenance,royalites & taxes of all materials including cost reinforcement with Cess etc.complete as per specification of Rural Roads & direction of E-I-C.KM Stone |
| 11 | 200 mtr Stone |
| 12 | Cautionary sign board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender