Tender For Special Repair To Certain Married Quarters At Af Stn Bagdogra
Tender Value
2.80 Crore
Estimated cost
Bid Submission
10 Sep 2026
24 days left
EMD
3.55 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Married Quarters At Af Stn Bagdogra
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION |
| 2 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each including making good the disturbed portion, complete all as specified and directed. |
| 3 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4.0 Sqm each including making good the disturbed portion, complete all as specified and directed. |
| 4 | Dismantling framed timber scantlings 40 sq.cm and over in section, in any position, complete all as specified and directed. |
| 5 | Dismantling boarding, any description, fixed in any position with screws, complete all as specified and directed. |
| 6 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified and directed. |
| 7 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 9 | Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed. |
| 10 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 13 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed. |
| 15 | Taking up or down 15mm dia bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 16 | Taking up or down 20mm dia bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 17 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 18 | Material and labour for, PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 19 | Material and labour for, PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork if required, complete all as specified and directed. |
| 20 | Material and labour for, PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including bituminous gap filling and necessary formwork, complete all as specified and directed. |
| 21 | Material and labour for, PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in bed block for hold fast and filling in pressed steel door frame, complete all as specified and directed. |
| 22 | Material and labour for, RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in chajja, beam etc., complete all as specified and directed. |
| 23 | Material and labour for, RCC (1:2:4) (using 20mm graded broken stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 24 | Material and labour for, brickwork with subclass ‘B’ bricks, old size, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 25 | Material and labour for, brickwork with sub class ‘B’ bricks, old size brick, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), complete all as specified and directed. |
| 26 | Material and labour for, use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders bressummers, lintels, cantilevers, chajjas including supports, overhangs, etc. also splays between floors and beams etc., complete all as specified and directed. |
| 27 | Material and labour for, use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete, complete all as specified and directed. |
| 28 | Material and labour for, use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cill, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/ PCC bands in walls, horizontal or sloping and similar works exc. 5cm but not exc. 10cm wide for rough finished surface of concrete, complete all as specified and directed. |
| 29 | Material and labour for, use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cill, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/ PCC bands in walls, horizontal or sloping and similar works exc. 10cm but not exc. 20cm wide for rough finished surface of concrete, complete all as specified and directed. |
| 30 | Material and labour for 2nd class hard wood in scantling wrought framed work, complete all as specified and directed. |
| 31 | Material and labour for, 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 32 | Supply and fix for, 2nd class HW, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. |
| 33 | Supply and fix for, solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, complete all as per specification and drawing given in SSR. |
| 34 | Supply and fix for Fiber Glass Reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as directed. |
| 35 | Supply and fix for factory made solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face and 2mm plain colour PVC sheet on back face, complete all as per specification and drawing given in SSR. |
| 36 | Supply and fix for, mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 37 | Supply and fix for, mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 38 | Supply and fix for, rolled mild steel roof trusses (framed/ unframed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde E-250) quality A, complete all as specified and directed. |
| 39 | Supply and fix for, mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 40 | Supply and fix for, 1.25mm thick pressed steel frames 105 x 60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 41 | Supply and fix for, 1.25mm thick pressed steel frames 125 x 60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 42 | Supply and fix for, anodised aluminium frame powder coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 43 | Supply and fix for, anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21, 100mm long (2 Nos), suitable handle 01 No. complete all as specified and directed. |
| 44 | Supply and fix for, 25mm thick powder coated aluminium sliding window shutter (minimum thickness of powder coating 50 micron) three way track section for frames of weight not less than 1.17 Kg/RM and sliding section for shutter frame alround with aluminium section of weight not less than 0.42 Kg/ RM in two panels and shutter including necessary aluminium fittings with and including 5mm thick selected quality plain glass and third one and including stainless steel wire cloth mesh of 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with stranded aluminium channel out side with and including handle, cleat, glazing clips, special auto lock, dry set, rubber gasket, complete all as specified and directed. |
| 45 | Supply and fix for, fabricated powder coated anodized aluminium grill of size 75x75mm, using 6mm dia bar fixed to outer portion of chowkhat using U/V section runners, complete all as specified and directed. |
| 46 | Supply and fix for, 150mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 47 | Supply and fix for, 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 48 | Supply and fix for, 100mm size butt hinges, medium weight, cold rolled stainless steel, complete all as specified and directed. |
| 49 | Supply and fix for, 75mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 50 | Supply and fix for, 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed. |
| 51 | Supply and fix for, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 52 | Supply and fix for, 125mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 53 | Supply and fix for, 150mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 54 | Supply and fix in repairs for, tubular towel rail, 20mm dia aluminium anodised, D type, 60cm long between flanges, complete all as specified and directed. |
| 55 | Supply and fix for, stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 56 | Supply and fix in repairs for, 25mm outer dia medium weight curtain rod pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental stainless steel clamps to fixed to wall, complete all as specified and directed. |
| 57 | Supply and fix for, pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 58 | Supply and fix for, pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 59 | Removing existing water proofing/ black top treatment including concrete padding, plastering roughening of concrete surfaces, cleaning and washing down the surfaces with water and removing debris/ rubish materials outside MOD land, complete all as directed. |
| 60 | Material and labour for, rendering 15 mm thick cement plaster on existing concrete roof surfaces in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement, finished even and smooth without using extra cement and providing one coat of applied bituminous primer over cleaned surfaces @ 0.30 litre per sqm, applying a coat of industrial bitumen 85/25 @ 1.2 Kg/ Sqm over bituminous primer then followed by APP modified prefabricated membrane 3.0mm thick weight not 3.0 Kg per Sqm water proof membrane reinforced with non woven polyster (weighting not less than 150 gm per sqm) laid on primed surfaces by forced water proofing membrane with 10cm longitudinal and horizontally over lapping and joints finally thermo-fused with LPG flames all as per manufacturer's instructions of APP modified membrane sheet and as specified in Para 11.44.5 of SSR Part-I and directed. |
| 61 | Supply and fix for, powder coated galvanised iron snap grid frame work of size 600mm x 600mm for false ceiling comprising of main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @1.2m c/c and including fixed with 4mm thick non asbestos fibre cement building boards, complete all as specified and directed. |
| 62 | Material and labour for, PVC 18-19mm thick decorative lamination board of density 600 Kg/ Cum manufactured by an ISO:9001-2005 certified with termite proof, water proof and flame retardant PVC sheet, complete fixed with each other using solvent cement adhesive and stainless steel screws etc., panels shall be fabricated using adhesive and screws and all the edges shall be covered with bonding tape and finished complete all as manufacturer's specoification and drawing. |
| 63 | Material and labour for, 75mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded broken stone aggregate) as in sub base floor, complete all as specified and directed. |
| 64 | Material and labour for, 25mm thick plain cement concrete (1:2:4) type B0 (using 12.5mm graded broken stone aggregate) as in sub base floors including finishing the surface even and rough to receive screed bed, complete all as specified and directed. |
| 65 | Roughening surfaces/ hacking of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed. |
| 66 | Material and labour for, non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) area of each tile exc.0.11 Sqm but not exc.0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 67 | Material and labour for, non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) area of each tile exc.0.18 Sqm but not exc.0.38 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 68 | Materials and labour for, non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) area of each tile exc.0.18 Sqm but not exc.0.38 Sqm, in skirting/ vertical surface of wall, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar (1:4), complete all as specified and directed. |
| 69 | Materials and labour for, glazed ceramic coloured tiles, 450 X 300 X 6 to 7 mm thick, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar (1:4), complete all as specified and directed. |
| 70 | Material and labour for, machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed or bedding in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 71 | Material and labour for, kota stone slab 20-25mm thick, in riser of steps, skirting, dado and pillar laid over and including 10mm thick backing coat in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 72 | Material and labour for, granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 15mm thick screed bed or bedding in cement mortar (1:6) including grinding and polishing, complete all as specified and directed. |
| 73 | Material and labour for, 18-20mm thick granite (of any type) tiles machine cut, in skirting/ dado laid over and including 10mm thick backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed. |
| 74 | Material and labour for, chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 20mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 75 | Material and labour for, preparation of old ceiling surfaces and applying two coats of white wash, complete all as specified and directed. |
| 76 | Material and labour for, complete removal of existing treatment of old plastered surfaces and applying two coats of oil bound distemper over 1.5mm thick wall putty, complete all as specified and directed. |
| 77 | Supply and fix for, 4mm thick sheet glass, ordinary quality and glazing fixed with neoprene rubber gasket in aluminium frame in square not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 78 | Supply and fix for, 4mm thick one side frosted sheet glass, ordinary quality and glazing fixed with neoprene rubber gasket in aluminium frame in square not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 79 | Material and labour for, preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil, complete all as specified and directed. |
| 80 | Material and labour for, preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 81 | Material and labour for, preparation of old painted surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 82 | Material and labour for, preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 83 | Material and labour for, complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brush and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement base putty to obtain smooth regular/ even finish surfaces using sand paper and applying two coats of weather proof exterior emulsion paint over a coat of primer, complete all as specified and directed. |
| 84 | Supply and fix in repairs for, 15mm bore chromium plated, fancy type long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 85 | Supply and fix in repairs for, two way angle cock with wall flange, 15mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions, complete all as specified and directed. |
| 86 | Supply and fix in repairs for, 15mm bore chromium plated fancy type pillar tap with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 87 | Supply and fix in repairs for, 15mm bore chromium plated, fancy type angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 88 | Supply and fix in repairs for, 15mm bore chromium plated, fancy type stop valves (coneacled type) with long shank and cup, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 89 | Supply, hoisting and fixing in repair in position of rotational moulded polyethylene water storage tanks in double layers (cylindrical vertical with closed top) of 500 litres capacity with ISI marked all as per specified in SSR Part I including ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (minimum weight 20 mm - 210 gms), screwed for iron pipe or brass ferrule of size 20mm dia, complete all as specified and directed. |
| 90 | Supply and fix in repairs for, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 91 | Supply and fix in repairs for, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 92 | Material and labour for, cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall, complete all as specified and directed. |
| 93 | Supply and laying of 16mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed. |
| 94 | Supply and laying of 20mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed. |
| 95 | Supply and fix in repairs for, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 96 | Supply and fix in repairs for, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 97 | Supply and fix in repairs for, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 98 | Supply and fix in repairs for, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 99 | Supply and fix in repairs for, 75mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 100 | Supply and fix in repairs for, 110mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 101 | Supply and fix in repairs for, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 102 | Supply and fix in repairs for, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 103 | Supply and fix in repairs for, PVC (SWR) vent cowl 110mm bore, complete all as specified and directed. |
| 104 | Supply and fix in repairs for, PVC (SWR) floor trap, plain with grating including having diameter of outlet 75mm including jointing with solvent cement to waste pipe fixed in cement concrete (1:2:4) type B1, complete all as specified and directed. |
| 105 | Supply and fix in repairs for, 0.63mm thick stainless steel kitchen plate rack of size 900 x 800 x 260mm fixed to brick/ concrete wall with screw including rawl plug, complete all as specified and directed. |
| 106 | Supply and fix in repairs for, sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 107 | Supply and fix in repairs for, shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified and directed. |
| 108 | Supply and fix in repairs for, 600mm x 450mm bevelled edge mirror of selected quality glass, 5.50mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 109 | Supply and fix in repairs for, vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including brackets, waste fitting, 32mm dia brass with long screws shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with and including 32mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 110 | Supply and fix in repairs for, vitreous china wash down water closet pan (EWC) (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including connection to drain (or outgoing pipe) and flushing pipe, complete all as specified and directed. |
| 111 | Supply and fix in repairs for, vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with 'P' or 'S' trap front and back inlet with integral foot rests (excluding flushing cistern and flush pipe), connection to trap and to flushing cistern anti syphonage pipe including provision of PCC or lime concrete bedding including making good to floor, complete all as specified and directed. |
| 112 | Supply and fix in repairs for, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections, complete all as specified and directed. |
| 113 | Supply and fix in repairs for, brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 114 | Supply and fix in repairs for, soap dish, stainless steel, fixed to wall with chromium plated brass screws, complete all as specified and directed. |
| 115 | Supply and fix in repairs for, PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle with and including bracket and PVC flush pipe of 32mm dia including cutting and pinning in ends, complete all as specified and directed. |
| 116 | Supply and fix in repairs for, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 117 | INTERNAL ELECTRIFICATIONTaking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete with all fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 118 | INTERNAL ELECTRIFICATIONTaking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete with all fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender