Tender For Repairs And Maintenance To Canal Cross Regulator Radial Gates Of Size 5.5 X 3.5 Mtr. - 02 Nos And Rope Drum Hoist 10 Mt Capacity By Replacing Old , Damaged Rubber Seal And Wire Rope By New Rubber Seal And Wirerope ,Manufacturing, Providing
Tender Overview
Project Description
Tender for Repairs And Maintenance To Canal Cross Regulator Radial Gates Of Size 5.5 X 3.5 Mtr. - 02 Nos And Rope Drum Hoist 10 Mt Capacity By Replacing Old , Damaged Rubber Seal And Wire Rope By New Rubber Seal And Wirerope ,Manufacturing, Providing And Erecting , Widening (1.0 M U/S + 0.5 M D/S) & Covering Of Existing Hoist Platforms With Enclosure & Roof - Deck 7.0 X 2.5 Mtr Per Gate X 1 Gates At Prbc Cr8, Ch.Km.113,Dist Beed, Complete Job Including Cost Of Material, Labour, Sundry ,Transportation & Labour Welfare Cess Etc.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Aug-2026 | Other | Other | 19-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old damaged side rubber seal from gate leaf of CR 5.5 x3.5 m - 1 No . Supplying, fitting new L type side rubber seal 2 Nos of side length confirming to IS 11855-1986 (Updated) size 90x15x40x18 - 8.40 mtr and G. I. Bolt M-20 x 100 mm with Double Washer and Nut-20 kg and dismantling of old damaged bottom rubber seal from gate leaf of CR 5.5 x3.5 m -1 No. Supplying, fitting new flat type bottom rubber seal 1 No of bottom length confirming to IS 11855-1986 (Updated) size 90x15 mm - 5.70 mtr and G. I. Bolt M-20 x 100 mm with Double Washer and Nut- 12.50 kg , |
| 2 | Dismantling of damaged wire rope, wire rope socket of 10 MT cap hoist -1 No . Fixing new wire rope of Dia 16 mm - 48 Mtr length , confirming to IS 2266. into Wire rope socket - 4 Nos, confirming to IS 2485. by Zinc ( IS 209 ) pouring and carrying load test. Applying Cardium compound (Servocoat 140) - 9 Kg with satisfactory test & Trial, |
| 3 | Draining of Old Oil from RGB & filling with Gear oil GX-90 - 8 Ltr, Cleaning Gear train by removing old Grease & Applying M.P. Grease grade no. 150 - 10 Kg to Gear train, Pedastal, Drum axle,Trunion pin, Locking box and Lifting bracket pin etc. and refilling of oil of Radial gate of 10 MT cap hoist -1 No., |
| 4 | Dismantling and fitting Phosphor Bronze Bush Bearing - 1 No. Complete with cost of material, sundry material and labour charges |
| 5 | Replacement of old and damaged Worm Reduction Gear Box (RGB), Single-Stage, Size O-600, Ratio 60:1, Double-ended Output by providing & fitting new Worm Reduction Gear Box (RGB), Single-Stage, Size O-600, Ratio 60:1, Double-ended Output. Complete job including cost of Material ((Consumable & sundry) and labour charges |
| 6 | Making arrangement for greasing of Trunnion Pin (2 Nos per gate) — grease nipples, bush grease groove, new end cover with central nipple & M.S. grease pipe |
| 7 | Manufacturing With QAP & fabricating Railing on Stair case from foot bridge to hoist bridge for Canal Cross Regulator of size 5.5x3.5 Mtr, Complete work Includes Material, Labour Charges, Machinery & Machining Charges. Rate Analysis for one peir. |
| 8 | Providing and applying anticorrosive Coal Tar paint in two coats including surface preparation, chipping the welding, cleaning spatters, dust etc. Complete as directed. after cleaning the surface to satisfaction of Engineer incharge by sand blasting / scraping removing oil, grease, other foreign materials, welding slag, dust etc. |
| 9 | Name of Work :Manufacturing, Providing and Erecting Widening (1.0 m U/S + 0.5 m D/S) & Covering of Existing Hoist Platforms with Enclosure & Roof — Deck 7.0 x 2.5 mtr per Gate x 1 Gates (CR8, Ch.Km.113) |
| 10 | Replacement of worn-out Bearing of Gear train pedastal of 10 Ton cap hoist by new one of C.R.Gate of size 5.5x3.5 Mtr-01 nos |
| 11 | De-silting of Gate Bay — removal of accumulated silt from U/S and D/S bay (Provisional — 1 Job; quantity as per actual) |
| 12 | Transportation , Local Handling by Crane charges for Loading & Unloading of Materials at CR8 Km 113 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender