Tender For Conversion Of Old Exg Godown To Cmbfscheme Central Kitchen Centre And Construction Of Toilet Building (2 Seats) At Melapalayam Zonal Office C Us In Ward No. 44
Tender Value
24.50 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
24500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conversion Of Old Exg Godown To Cmbfscheme Central Kitchen Centre And Construction Of Toilet Building (2 Seats) At Melapalayam Zonal Office C Us In Ward No. 44
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and deposting on bank with an intial lead of 10m& initial liftm of 2m in hard siff clay , stiff black cotton , hard red earth shales , murram , gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil asper standard specification 20.B including refilling charges |
| 2 | Plain cement concrete 1:4:8 mix using 40mm metal ISS HBG metal including and const and conveyance of all materials and all labour charges etc completeas per std specification |
| 3 | Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication. |
| 4 | Without Props |
| 5 | With Props |
| 6 | Column |
| 7 | Lintel, Roof Beam & Slabs |
| 8 | Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete.asper standard specification. |
| 9 | Reinforced cement concrete 1:11/2:3 mix using 20mm ISS size HBG metal from approved quarry including all cost and conveyance of all materials to site and all labour charges etc., complete.asper standard specification. |
| 10 | For Basement |
| 11 | Ground Floor |
| 12 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 13 | Plain Cement Concrete 1:1.5:3 (one cement, One and Half crushed stone sand and Three hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 14 | Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 15 | Brick work in cement 1:5 mix using well burnt country bricks of size 8 3/4\\"x4 1/4\\"x2 3/4\\" including all cost and conveyance etc complete as per std specification |
| 16 | For Basement |
| 17 | Ground Floor |
| 18 | Special ceiling Plastering cement mortar 1: 3 mix 10mm thick including cost and conveyance all materials etc. complete as per std specification |
| 19 | Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification. |
| 20 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 21 | Weathering course of concrete borken brick jelly 20mm size in pure slacked lime over RCC roof slab the proportion 32:12.5 (Thirty two Broken Jelly and Twelve and Half Slacked lime) Mix for required depth of 80mm for giving required slope and thickness to roof as required well beaten with wooden beaters etc., complete complying with standard specifications. |
| 22 | Terrace flooring with one course or pressed tiles of size 20cm x 20cm x 20mm laid in CM 1:3 (One cement and three sand) mixed with crude oil 10% by weight of painted with same oiled mortar in all cost of materials and lab our charges etc., complete. as per standard specification. |
| 23 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of 150mm x 150mm x 6mm sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 24 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 25 | Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 and above 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by the departmental officers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 26 | Supplying and fixing Mild Steel For Structural steel ,grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 27 | Supplying , fixing and roofing with fully corrugated asbestos cement sheets (grey colour) of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers. |
| 28 | Fabrication, Supply and fixing in position fine wiremesh netting inclusive of cost of red oxide primer etc. complete complying with standard specification and as directed by the departmental officers. |
| 29 | Supplying and Fixing of Bitumen Felt 15mm thick Pad including all cost and conveyence of materials and all labour charges etc., complete |
| 30 | Supplying fixing of M.S sheet doors and widows and Grills including all cost and conveyance of materials to site and all labours charges for etc. complete asper standard specification. |
| 31 | Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification. |
| 32 | Painting two coats with ready mixed approved paint over new steel surface including cost and conveyance all materials etc. complete asper standard specification. |
| 33 | Painting two coats with ready mixed approved paint over old steel surface including cost and conveyance all materials etc. complete asper standard specification. |
| 34 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 35 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works |
| 36 | Construction of INSPECTION CHAMBER clear size of 0.90m x 0.90m including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 9” x 43/8” x 23/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. |
| 37 | Supply and Fixing of following pipes and special for UGD Connection including cost and conveyance all materials and labour cost etc. complete |
| 38 | 110mm PVC Pipe |
| 39 | 110mm PVC Elbow |
| 40 | 110mm PVC Elbow with Door |
| 41 | 110mm PVC Tee |
| 42 | 110mm PVC Bend |
| 43 | Conducting Geophysical Investgation for finding ground water table with necessary T & P including all labour charges etc complete as per std specification |
| 44 | Supplying of 140mm dia PVC Special Blue pipes for borwelles outer casing pipe of best quality including all labour charges etc., complete as per SI no 159.A (c) PWD schedule of rate and standard specification |
| 45 | Drilling of 125mm (4 1/2”) nominal dia vertical borewells anywhere in Tamilnadu in all formations, suitable for down the hole hammer drilling such as medium hard rock to hard rock formation, consolidated formation etc and drilling over burden to a dia not less than 200mm including insertion of 165 mm PVC casing pipe, couplings caps and other relevant materials required upto the depth as directed by the Engineer or his representative including grouting of cement 25kg (minimum) up to the depth of over burden are including borewell development flushing of borewell at a pressure 7kg/cm2 (100 lb per square inch) including yield test, crew charges, cost of consumables, transportation charges of casing pipes and all other materials including assembling complete to the satisfaction of the Engineer and as stipulated in the technical specification. The entire works should be carried out as per IS 2800 Part I & II / 1979. Finished dia of borewells shall not be less than 145mm |
| 46 | Labour Charges for inserting 140mm OD PVC casing pipes assmbly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste ect.complete as per schedule item no 14-d(i)of TWAD schedule of rate. |
| 47 | Supplying and following pipes and specials |
| 48 | 1\\" HDPE hose |
| 49 | 1\\" GI pipe |
| 50 | 1\\" GI union |
| 51 | 1\\" GI elbow |
| 52 | 1\\" GI tee |
| 53 | 1\\" GI coupling |
| 54 | 1\\" G.I Hex Nipple |
| 55 | 1\\" x 3/4\\" GI Reducer |
| 56 | 3/4\\" HDPE hose |
| 57 | 3/4\\" GI pipe |
| 58 | 3/4\\" GI union |
| 59 | 3/4\\" GI elbow |
| 60 | 3/4\\" GI tee |
| 61 | 3/4\\" GI coupling |
| 62 | 3/4\\" G.I Hex Nipple |
| 63 | 1\\" Hose color |
| 64 | 3/4\\" Hose color |
| 65 | 1\\" PVC Pipe |
| 66 | 1\\" PVC Coupling |
| 67 | 1\\" PVC Tee |
| 68 | 1\\" PVC Ellbow |
| 69 | 3/4\\" PVC Pipe |
| 70 | 3/4\\" PVC Coupling |
| 71 | 3/4\\" PVC Tee |
| 72 | 3/4\\" PVC Ellbow |
| 73 | 3/4\\" x 1/2\\" PVC Reducer |
| 74 | 3/4\\" G.M Gate valve |
| 75 | Bottom unit |
| 76 | 140mm Bore cover |
| 77 | 1000 litre tank |
| 78 | 15mm SD tap |
| 79 | Solventcement |
| 80 | Supply of 1.5 HP Jet Pumpset including all cost and conveyence etc., complete |
| 81 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 21) |
| 82 | Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube. (SD 89) |
| 83 | Supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting (SD 456) |
| 84 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb (SD 83) |
| 85 | Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 5 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for open P V C plug point ( S D 36) |
| 86 | Wiring with 2 x 4 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 15A 3 pin non interlocking Wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC power plug point (SD 39) |
| 87 | Supply and fixing of 1200mm (48\\")sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") (SD 106) |
| 88 | Supply and fixing of 450mm (18\\") sweep (light duty) AC dxhaust fan complete without provision of hole in the wall (SD 119) |
| 89 | Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make) (SD 157) |
| 90 | Supply and run of 4 of 6 sq.mm(84/0.3) PVC insulated SC unsheathed Cu.conduction of 1100V on 7/20 GI bearer Eire for service connection mains. (SD 68) |
| 91 | Supply and run of 4 of 6 sq.mm.(84/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class 'B' ) suitably bent at both ends with neccessay angle iron upright and end support for mains (SD 73) |
| 92 | Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masony. (SD 221) |
| 93 | Supply and fixing of 3 phase 32A aerial fuse unit for 3Nos. 32A fuse units (500V)on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps (SD 135) |
| 94 | Supply and Fixing of TNEB meter Board suitable for 32A Three Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\"x1/8\\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection with 7/20 PVC insulated copper wire from EB meter to fuse unit,(SD 128). |
| 95 | Supply and Fixing of 5A or 10 Amps AC 3 phase 4 wire of watt hour metre on Suitable TW box complete with earth connections. (SD 126) |
| 96 | TNEB Charges for Online Applications and all petty charges etc., complete |
| 97 | Labour charges for Laying of PVC pipes and specials from OHT to Toilet block and fixing of Motor etc., complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender