Tender For Construction Of Pickle Ball Court At Thirupur Kumaran Park In Ward No 45 In Zone 5 In Tambaram City Municipal Corporation.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
24 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Pickle Ball Court At Thirupur Kumaran Park In Ward No 45 In Zone 5 In Tambaram City Municipal Corporation.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum Manual/mechanical excavation of pits sized 3 ft x 3 ft x 3 ft depth.Removal of loose soil and debris.Ensuring level base and vertical sides.Disposed soil to be shifted to designated area or site boundary. |
| 2 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means |
| 3 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 4 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 5 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 6 | Supplying and filling in foundation and basement with stone dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 7 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - |
| 8 | Laying of 4\\" PVC pipes at adequate intervals for better slope and water drainage through the entire lenght of the brickwork at 15 feet intervals |
| 9 | Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including mortar plasticizer at 200ml per 50Kg of cement used, finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 10 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 11 | Top Fixture Support: Pre-drilled holes or welded brackets for: Net hooks GI cable supports LED light mounting (if required) using 50x50x3mm L angles |
| 12 | Supply and fixing of 200 W LED Sports Luminaire IP66, IK08, 5700K withsystem effi- cacy at least 100 Lumens / watt including cost and albour charges etc complete |
| 13 | Supply and clarnping of 2 x 4 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps as per Sd 193 |
| 14 | Supply and laying of 4x16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good SD 199 |
| 15 | Supply and laying of 3.5x25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good Sd 200 |
| 16 | Supply and frxing of brass cable gland PVC armoured LTUG cable with earth connectio 3.50x25 sqmm SD 164 |
| 17 | Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End Sd 532 |
| 18 | Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm.with the following on wall with earth connection only. Sd 618 |
| 19 | Material Type:PVC-coated GI (Galvanized Iron) mesh Minimum wire thickness: 2 mm Coating: High-grade PVC for enhanced rust resistance and weather protection Mesh Size: Grid dimensions: 2 inches x 2 inches square openings Fencing Dimensions: Height: 10 feet from the ground level on all four sides Coverage: Complete enclosure of the court to ensure safety and prevent unauthorized access.Installation Details: GI mesh to be fixed on sturdy steel poles (as per site condition) Poles to be spaced at equal intervals for optimal mesh tension and support All joints to be secured with rust-proof fastener Finishing: All exposed metal components will be treated with anti-corrosive paint (where applicable) Mesh will be tensioned uniformly to avoid sagging |
| 20 | surface prepartion removal of wedgesand levelling using earth moving machnaries including hire chaefes and all labour cahrges etc complete |
| 21 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 22 | Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications |
| 23 | Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications |
| 24 | Providing and laying 50 mm compacted thick dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 505 of MORTH Rev-5 specifications. |
| 25 | Primer (PACE COURT Acrylic Concrete Primer) High-strength, concentrated acrylic primer used to enhance adhesion of acrylic layers . Must be diluted onsite (1:2 with water). Installation: Apply diluted primer evenly using brush/roller. Must cure for 2 hours minimum before next coat Acrylic Resurfacer Acrylic Resurfacer (PACE COURT™ Acrylic Resurfacer)100% acrylic emulsion blended with silica sand and cement to smooth and level surfaces. Mix Ratio: 50 kg Acrylic Resurfacer 40 kg Cement 50 kg Silica Sand (#80) Water @ 1.10 kg/m² Installation:Apply 1–2 coats using rubber squeegee Ensure cross-directional application for each coat (90° angle) Fill minor surface undulations as needed Coverage: ~0.29 – 0.40 kg/m²/application Base colour Coat (PACE COURT™ System) Color Coat (PACE COURT™ Acrylic Color Coat) Durable, UV-resistant, textured acrylic coating used for surface color finish and raction. Available in Green M, Red, Blue M.Mix Ratio:25 kg Acrylic Color 7–12 kg Silica Sand (#80)Water @ 0.615 kg/m²Installation:Apply 2 coats perpendicular to each other using rubber squeegee Base colour Coat (PACE COURT™ System) Color Coat (PACE COURT™ Acrylic Color Coat)Durable, UV-resistant, textured acrylic coating used for surface color finish and traction. Available in Green M, Red, Blue M.Mix Ratio:25 kg Acrylic Color 7–12 kg Silica Sand (#80)Water @ 0.615 kg/m² Installation:Apply 2 coats perpendicular to each other using rubber squeegee |
| 26 | Providing Pickle ball net and post including cost and fixing charges etc complete ` Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender