Tender For Special Repair Of Certain Mes Installation Bldgs Located At Hayde Enclave Inf Bn Ii And Other Connected Wks At Nams
Tender Value
43.29 Crore
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
86597
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Certain Mes Installation Bldgs Located At Hayde Enclave Inf Bn Ii And Other Connected Wks At Nams
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed. |
| 2 | Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed. |
| 3 | Taking down Pair of old gates/ shutters , area n exc 9 Sqm and erection and refixing the same after making it serviceable, easing, renewing and greasing, oiling complete including cutting, filling for hold fast incl making good in PCC 1:2:4, type B-0 as required, including two coat of synthetic enamel paint to MS gate as required complete all as specified and directed. |
| 4 | Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf(g) 12 mm square guard bar, 10 cm centre to centre.(h) 25x4 mm flat iron all around for joint of both frame.Note: (I) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & Finishing around disturbed required surface with plaster in CM 1:4 and match with existing finishing.complete all as specified and directed by Engineer-in-charge. |
| 5 | Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified.(a)12mm Sq Guard bar 10Cm C/C Note:(i) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing(ii) Wire cloth,Glass and Enamel Paint to measured separately in different item complete all as specified and directed by Engineer-in-charge. |
| 6 | S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified |
| 7 | S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified |
| 8 | S&F, 35 mm thick, 2nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 9 | S&F 35 mm thick plain, framed, panelled shutters with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed. |
| 10 | S&F factory made solid PVC moulded door shutter with wood free solid board, 28 to 30 mm thick (stiles) with 2, 4 or 6 rised panel design with 5mm thick 3D wood laminated moulded PVC sheet Polyurethane painted on the front and back face with with 19 guage thickness usiing MS square tuning supplying and fixing of 19 mm x 19 mm frame structure including taking down of old shutter and making good complete all as specified and directed. complete all as specified & directed. |
| 11 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails,guide rail,braces, etc and similar work complete all as specified,drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging also fastening and fixing (Fe 410-W(Gde E-165)) quality A complete including dismantling of old all as specified and directed. |
| 12 | S&F floor door stopper of aluminium alloy body and tongued,anodised,with hard drawn steel spring,fixed 140mm min length complete all as specified and directed. |
| 13 | S & F 150mm aluminum handles, cast type, anodised etc complete all as specified and directed |
| 14 | S & F 150 mm aluminum anodised barrel tower bolts of extruded sections and fixed complete all as specified and directed |
| 15 | S & F butt hinges 100 mm size medium weight cold rolled mild steel(zinc chromate coating)complete all as specified and directed. |
| 16 | M&L for 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 17 | S & F in repair 300mm ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified |
| 18 | M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth over one coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete. |
| 19 | M&L for one coat of synthetic enamel paint over old steel surface including preparation of old steel surface exc 10 cm width or girth complete all as specified and directed. |
| 20 | Supply and fix in repair, 20 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed. |
| 21 | S&F in repair 20 mm bore dia gate valve,gun metal with iron wheel head,screwed both ends and fixed all as specified and directed. |
| 22 | Supplying and fixing in repairs PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, handle type including 32mm dia of PVC(Heavy duty) flush pipe including brackets complete all as specified and directed by Engr-In-charge. |
| 23 | Supply and fxing of rotational moulded polythene water storage tank with cover, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including supply and fixing ball valve 20mm, high pressure polyethelyne float and fly nuts complete including demolition of existing broken concrete tanks complete all as specified and directed. all as specified and directed. |
| 24 | S&F in repair sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing complete all as specified and directed. |
| 25 | S&F in repair Tubalar towel rail,20mm dia,D-type 60 cm long between flanges all as specified and directed. |
| 26 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 27 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exc. 6 mean radius in CM 1:6 complete all as spcified and directed by Engr-in-charge. |
| 28 | All as per Srl Item No 27 above but except brick. complete all as specified and directed |
| 29 | S & F in repair 600mm x 450mm beveled edge mirror of the selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 30 | S & F in repair for vitreous china squating pan of (Orissa Pattern) size 580 x 440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cistern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed. |
| 31 | Supply and fixing in repair vitreous china wash hand basin(white) wall hung corner type of size 400 x 400 mm including bracket, CP waste coupling 32mm, waste pipe, chain, plug and porcelein stopper complete all as specified. |
| 32 | Taking down G.I tubing 15mm bore including connections complete all as specified and directed by Engr-In-Charge. |
| 33 | All as per ser item no-32 above but 20mm bore. complete all as specified and directed |
| 34 | S&F 15mm bore G.I tube medium grade freed to wall or under floor complete including cutting chases and make good in CM 1:3 and fittings fixed with teflon tape complete all as specified. |
| 35 | All as per ser item no-34.00 above but 20mm bore. complete all as specified and directed |
| 36 | M&L for PVC connection 600mm long superior quality with PTMT nut on both side fixed with teflon tape to the fittings complete all as specified and directed. . |
| 37 | Supply and fixing in repair bib tap long body fancy type 15mm dia chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down old PVC tap complete all as specified and directed by Engr-In-Charge. |
| 38 | S&F in repair 15mm bore stop cock concealed as in repair long shank chromium plated fancy type screwed down high pressure with crutch or butter fly handle. complete all as specified and directed |
| 39 | S&F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete including taking down old PVC angle cock complete all as specified and directed. |
| 40 | Supply and fixing in repair 125mm dia , Brass chromium plated , shower rose with swivel joint fixed to GI pipe, complete including taking down old PVC shpower rose all as specified and directed by Engr-In-charge. |
| 41 | Taking down cement plaster from walls/ceiling including raking out joints hacking for key scrubbing down with water complete all as specified and directed |
| 42 | M&L for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces on internal walls, finished even and smooth without using extra cement incl taking down plaster of walls scrubbing down with water and dispose off debries where directed complete all as specified and directed |
| 43 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces on external walls, finished even and smooth without using extra cement incl taking down plaster of walls scrubbing down with water and dispose off debries where directed, complete all as specified and directed |
| 44 | M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces oF Ceiling & finished even and smooth without using extra cement incl taking down old plaster scrubbing down with water and dispose off debries, complete all as specified and directed |
| 45 | M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 46 | M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed. |
| 47 | Material and labour for two coats of Acrylic smooth exterior paint of required shade on new plastered surfaces of walls (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer including preparation of surfaces complete all as specified and as directed. |
| 48 | Material and labour for applying one coat of Acrylic smooth exterior paint of required shade on old plaster surface of walls incl preparation of surfaces (one coat applied @ 1.67 Ltr/10 Sqm each coat) complete all as specified and as directed. |
| 49 | Material and Labour for preparation of old decorated plastered surfaces and applying one coats of white wash on ceiling complete all as specified and directed |
| 50 | Material and Labour for removal of existing treatment by wire brushing and washing, rubbing down and stopping of surfaces and applying two coats of oil bound distemper over applying 1mm thick birla wall care putty on walls complete all as specified and directed by Engr-In-charge. |
| 51 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as specified and directed |
| 52 | M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 53 | M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick verticale tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed. |
| 54 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed. |
| 55 | M&L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 56 | S&F machine pressed coloured (yellow, red, black, white as directed) precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as spd and directed. |
| 57 | M&L for machine pressed factory made PCC 1:2:4 type B-1 using 20mm graded stone agg. as in precast kerb stone incl rounded chamfered edge and set in CM 1:4 including demolition of old PCC kerb stone of any description complete all as specified and directed. |
| 58 | M&L for hardcore of broken bricks of gauge n.exc 63mm,deposited,spread and levelled in layers n.exc 15cm thick, watered and rammed to true surface complete all as specified and directed. |
| 59 | M&L for 100mm avarage thickness PCC 1:2:4 type B1 (using 40 mm graded stone aggregate) as in floor, sub base complete all as specified and directed. |
| 60 | M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate set in cement mortar 1:6 as in landings,cover slabs for manhole etc,water tank base and similar work complete all as specified and directed including demolition of existing RCC. |
| 61 | M&L for RCC (1:2:4) type B-0 using 12.5mm graded aggregate as in slabs supported on walls,beams and columns in floors,roofs,landings,deck slabs,balconies and in shelves including chase cutting and hooking/welding to existing RCC and like including demolition of existing reinforced RCC . complete all as specified and directed |
| 62 | Material and labour for 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed. |
| 63 | M&L for form work to soffits of suspended slab such as roof slab,Floor slab, shelves etc and making surface fair finished complete all as specified and directed by Engr-In-Charge. |
| 64 | Mild steel TMT bars 8 to 10 mm dia and over, cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 65 | M&L for demolition of RCC as in shelves of kitchen and almirah,vertical balcony walls and similar work including cutting reinforcement as required complete all as specified and directed. |
| 66 | M&L for PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in 50mm thick plinth protection and as in path including demolition of PCC and throwing off rubbish off the residential area complete all as specified and directed. |
| 67 | Dismantling up of PVC drain/rainwater pipes 75/100mm bore set in cement mortar fixed to wall/laid in trenches etc including any type of joints,T,Y,bend etc complete all as specified and directed. |
| 68 | Supply and fixing for PVC (SWR) floor trap 110 mm dia of outlet, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1,complete all as specified and directed. |
| 69 | Supply and fixing 110 mm bore PVC (SWR) pipes rain water pipe single socketed in any length joints fixed to walls with and including clamps(Minimum 03 Nos each span any length), nut bolts etc complete all as specified and directed. |
| 70 | Supply and fixing PVC (SWR) bends without access doors 110mm bore ( in any radius) diminishing peices or tapers (larger bore measured) ,complete all as specified and directed. |
| 71 | M&L for repair to RCC Chajjas, roof projection edges ,hanging part of chajjas, edges of chajjas, RCC parapets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl necessary renforcement of 6mm TMT bars wherever required,form work and MS chicken wire mesh for bounding the concrete and finishing the structure and plaster work in CM 1:3 at any height of buildings making edges fair and even and smooth etc including demolition of broken or cracked portion and throwing off rubbish completed all as specified and directed by Engr-in-Charge.Note:- Top surface area of structure to be measured for payment as a whole.Rates are inclusive of all the items specified. |
| 72 | Supply and fixing Godrej pattern cupboard shutter of 0.8-0.85mm thick MS sheet fixed in & including angle iron frame 35x35x5mm including necessary fittings such as CP handle,lugs, hinges, locking arrangement including two coats of synthetic enamalled shop coat spray paints over a coat primer complete and making good with PCC 1:2:4 to dismantled/broken portion complete all as specified and directed.(colour as per choice of Engr-In-Charge) |
| 73 | S&F 1.00 mm thick back sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete as for mumty doors all as specified. |
| 74 | M&L Intergral Water Proofing compound @3% by weight of cement complete all as specified and directed. |
| 75 | S&F 4mm thick acrylic sheet board of High quality with Media printing of 3 m of best quality incl stainless steel stud (size of board, design of bd, type of print on sheet, size of stud not less than 35 mm x 22 mm dia, samples of letter, pictures, writing will be provided as approved and fixed at any height from GL complete all as specified and directed incl dismantling of existing damaged / rusted sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70 kg per sqm. complete all as specified and directed. |
| 76 | Dismantling existing old vintage damaged and rusted / faded road sign boards complete all as directed . |
| 77 | S&F for HIP RATRO radium sheet / tape on stainless steel frame (size of board / samples of letter / pictures / writing will be provided as approved and of best quality, incl dismantling existing old vintage damaged standing sign board complete all as specified and directed.Note-Composite panel sheet, Stainless steel pipes will be measured and paid separately. |
| 78 | S&F, in repair, for 5 mm thick ACP (Aluminium composite panel) board prelaminated one sides with decorative choice laminations and fixed with screws to aluminium frame including aluminium of size pipe 40mmx25mm and 1.5mm thick best quality work complete all as specified and directed. |
| 79 | M&L for glow sign board frame / standing sign board made out of stainless steel tubular / flat / angle as in any size, dia and stainless steel of grade A-ISI 304(1818) complete all as specified and directed |
| 80 | S&F decorative stainless steel dome 65mm to 75mm dia complete all as spd and directed. |
| 81 | Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed. |
| 82 | M&L for plain cement concrete (1:2:4) type B2, using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 83 | M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 84 | Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed. |
| 85 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 86 | M&L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding, haunching, sub base floor, even and smooth without using extra cement for further treatment complete all as specified and directed. |
| 87 | M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) applied on primed surface by forced application of heat and roller, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed. |
| 88 | M& L for 10mm rendering in cm (1:4) as above roof slab surfaces including WPC @3% by weight of cement, finished the surfaces even and smooth without using extra cement complete all as specified and directed.Note: WPC should be under sepearate item. |
| 89 | Apply two coats of aluminium paint over non assesble roof surfaces complete all as per manufacturer's instructions and as directed Please Enable Macros to View BoQ information |
| 90 | Apply two coats of aluminium paint over non assesble roof surfaces complete all as per manufacturer's instructions and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender