Tender For Repair & Replacement Of Panelling, Joinery And Misc E/M Works In Various Units In Kargil Under Ge Kargil
Tender Value
19.95 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
39900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Replacement Of Panelling, Joinery And Misc E/M Works In Various Units In Kargil Under Ge Kargil
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets of any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge. |
| 2 | Dismantling timber scantling as in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section in framed work in any position complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Plain fillets of second class soft wood (KAIL), sectional area not exceeding 3 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work complete all as specified and directed by Engr-in-Charge. |
| 7 | S&F 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work complete all as specified and directed by Engr-in-Charge. |
| 8 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 sqm but not 4 Sqm each and all as specified and directed by Engr-in-Charge. |
| 10 | Taking down shutter of any description n.exc 1sqm each complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking down shutter of any description exc 1sqm and nexc 2sqm each complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F Sheet glass of 4.8mm thickness,ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F 9mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F in repair Door closer hydraulically of aluminium (die cast) body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class soft wood KAIL) complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F 35mm thick 2nd class soft wood (KAIL) plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F 30mm thick 2nd class soft wood (KAIL) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F 100mm mild steel butt hinges medium weight cold rolled complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F 75mm mild steel butt hinges medium weight cold rolled complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F 150mm long Aluminium anodisedl barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F 125mm extruded aluminium alloy handles febricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F 100mm extruded aluminium alloy handles febricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F 300mm Aluminium alloy anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 25 | Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5Sqm each complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F 4mm thick glass pan ordinary quality and glazing with oil putty in square not exc 0.5 sqm each pane complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F in repair cabinet mirror 5mm thick of selected quality glass, mounted on 6mm thick ply and around wooden beading polished complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for preparation of new wood and wood based material surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L for prepration of old painted surface of wood and wood based material and one coat of synthetic enamel paint of any description, not otherwise described over 10cm width or girth complete all as specified and directed by Engr-in-Charge. |
| 31 | Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets, bulk head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc and all as specified and directed by Engr-in-Charge. |
| 32 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all aas specified and directed by Engr-in-Charge for one light point or bell/buzzer point controlled by one switch. |
| 33 | All as per Srl item No. 32 here in before but for one 3 pin 5 Amps socket outlet on same board complete all as specified and directed by Engr-in-Charge |
| 34 | All as per Srl item No. 32 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board complete all as specified and directed by Engr-in-Charge |
| 35 | All as per Srl item No. 32 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board complete all as specified and directed by Engr-in-Charge |
| 36 | S&F Switch piano flush type 5 Amps, single pole one way complete all as specified and directed by Engr-in-Charge |
| 37 | S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete all as specified and directed by Engr-in-Charge |
| 38 | S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type complete all as specified and directed by Engr-in-Charge |
| 39 | S&F Socket Outlet 2 in 1, 5 Amp flush type complete all as specified and directed by Engr-in-Charge |
| 40 | S&F Lamp holder, insulated body with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge |
| 41 | S&F Ceiling rose on PVC squre block surface bakelite 65x50mm, two to three terminals complete all as specified and directed by Engr-in-Charge |
| 42 | S&F Bell push, flush type, 5 Amp complete all as specified and directed by Engr-in-Charge |
| 43 | S&F Electronic Ding Dong Bell, AC 240 volts single pole, complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F Modular socket 6A-2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge |
| 45 | S&F Modular socket 6A/16 A -2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge |
| 46 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 47 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender