Tender For Special Reapir Of All Bathrooms Of Other Rank Single Living Accn (Bldg No. P-22) At J-1 Loc Of Certain Unit Under Ge (East) Jalandhar Cantt.(Tender Id No 2026_Mes_784270_1)
Tender Value
48.24 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
96482
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Reapir Of All Bathrooms Of Other Rank Single Living Accn (Bldg No. P-22) At J-1 Loc Of Certain Unit Under Ge (East) Jalandhar Cantt.(Tender Id No 2026_Mes_784270_1)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thickness (below or above ground level), complete all as directed by Engineer-in-charge. |
| 2 | M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish, complete all as specified and as directed. |
| 3 | Demolition of cement concrete in ground floor and paving/as in sunken portion ( below or above ground level), complete all as directed |
| 4 | M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring, complete all as specified and as directed. |
| 5 | Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:-(i) The top surface of the sunken RCC slab shall be laid with cross slope as indicated in drgs towards the spouts. The min thickness of the RCC slab shall be as specified in drg.(ii) PCC 1:1.5:3 fillets at corners with 12.5mm graded aggregate shall be provided.(iii) Plastering in CM (1:3) 15mm thick with WPC on walls as well as on sunken floor finished even and smooth using extra cement.(iv) GI Pipe 40mm dia medium grade be inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe upto two storey construction and 25cm beyond two storey construction.(v) After doing the plaster, testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slabs. Any leakage/seepage observed shall be rectified before carrying out water proofing treatment. |
| 6 | (vi) Two component Acrylic modiied Cementitious coating:-(aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:-(bb) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO.(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions(ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. |
| 7 | (vi) Two component Acrylic modiied Cementitious coating:-(aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:-(bb) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO.(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions(ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. |
| 8 | (nn) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE.(vii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent.(viii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around. |
| 9 | Demolition of brick work in cement mortar, complete all as directed. |
| 10 | Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls in CM 1:4, complete all as specified and as directed. |
| 11 | M&L for Brick work with sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and as directed. |
| 12 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as directed. |
| 13 | M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including,dismatling, pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:4, complete all as specified and as directed. |
| 14 | Taking down cement plaster of any description incl raking out joints, hacking for scrubbing down with water etc, complete all as directed. |
| 15 | M&L 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and as directed. |
| 16 | M&L plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling, complete all as specified and as directed. |
| 17 | M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4(externally) finished even and fair without using extra cement, complete all as specified and as directed. |
| 18 | M&L for preperation newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and as directed. |
| 19 | M&L for preparation of newly plastered surface of ceiling including cornices pilasters etc.and applying three coat of white wash on ceiling, complete all as specified and as directed. |
| 20 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed. |
| 21 | Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 22 | S&F Non skid ceramic coloured 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed 1:6 cm, complete all as specified and as directed. |
| 23 | S&F of glazed ceramic coloured tiles300x450x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick in cm (1:4) in vertical surfaces of walls/skirting etc, complete all as specified and as directed. |
| 24 | Taking down chowkhats or frame with shutter without taking off shutter from the frame area not exc 1.5 Sqm each and removal to store, complete all as directed. |
| 25 | Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm each and n.exe 4.0 sqm removal to store, complete all as directed. |
| 26 | M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc, complete all as specified and as directed. |
| 27 | S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 28 | Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, S&F in opening as per specification & drawing given in SSR-2004, complete all as specified and as directed. |
| 29 | S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having strip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame and site as specification, complete all as specified and as directed. |
| 30 | M&L 150 mm long aluminium anodized barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 31 | S&F 100mm size butt hinges medium weight cold rolled mild steel, complete all as specified and as directed. |
| 32 | S&F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed. |
| 33 | S&F aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and as directed. |
| 34 | S&F Extruded aluminium alloy handles, fabricated type,anodised 150 mm in size, complete all as specified and as directed. |
| 35 | S&F Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and as directed. |
| 36 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 75mm, complete all as specified and as directed. |
| 37 | M&L for preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 38 | S&F Steel window/ ventilator (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including Guard bars, hold fast, tower bolt and handles etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), complete as per Drg No CEJZ/TD-1020/08 Sheet No. 1/3 to 3/3.Note:- The above rate for glazed and gauged shutter window/ventilator and measured one time clear opening for payment of window/ventilator. |
| 39 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 40 | S&F figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane, complete all as specified and as directed. |
| 41 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed. |
| 42 | S&F 2000 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I. |
| 43 | S&F 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms), complete all as specified and as directed. |
| 44 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 45 | Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store. |
| 46 | S&F 110 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and as directed. |
| 47 | S&F 110 mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 48 | S&F 110 mm dia PVC (SWR ) junction single, (Single T) with acess door equal or unequal with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 49 | M&L 110mm PVC (SWR) PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement fixed in repairs, complete all as specified and as directed. |
| 50 | S&F 110 mm dia PVC (SWR ) bends any radius, complete all as specified and as directed. |
| 51 | S&F PVC(SWR) vent cowl 110mm dia, complete all as specified and as directed. |
| 52 | M&L PVC (SWR) gully trap 125/110mm,setting and jointing with solvent cement complete all as directed |
| 53 | Taking down GI Tubing 15 mm dia and connection including cleaning for refixing or removal to store, complete all as directed. |
| 54 | Ditto all as per item no. 50 above, but 20 mm dia GI tubing, complete allas directed. |
| 55 | Ditto all as per item no. 50 above, but 25 mm dia GI tubing, complete all as directed. |
| 56 | S&F GI tubing 15 mm bore fixed to wall/ ceiling or floor, complete all as specified and as directed. |
| 57 | Ditto all as per item no. 53 above, but 20 mm dia GI Tubing, complete all as directed. |
| 58 | Ditto all as per item no. 53 above, but 25 mm dia GI tubing, complete all as directed. |
| 59 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed. |
| 60 | S&F in repairs angle valves 15mm cast copper alloy chromium plated fancy type , screwed down , high pressure ,with crutch or butterfly handle ,screwed both ends for iron pipe or for union and fixed, complete all as specified and as directed. |
| 61 | S&F in repair stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, complete all as specified and as directed. |
| 62 | S&F in repair bib taps fancy type ISI marked cast copper alloy chromium plated suitable for 15mm bore pipes with crutch or butter fly handle screwed for iron pipe or brass ferrule all as specified . |
| 63 | S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and as directed. |
| 64 | S&F PVC connection 450 mm long suitable for 15 mm bore pipe including PTMT nuts, complete all as specified and as directed. |
| 65 | S&F chromium plated grating 125 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap, complete all as specified and as directed. |
| 66 | S&F PVC waste pipe 32 mm dia flexible for wash hand basin complete Make -Polyplast/Symet or equivalent, complete all as specified and as directed. |
| 67 | S&F in repair 50 mm dia PVC waste pipe for urinal, complete all as specified and as directed. |
| 68 | S&F in repair Orrisa pattern WC vitreous china white of size 580mmx440mm fixed in repair incl provision of lime concrete bedding and P trap and breaking up of existing damaged WC seat and connecting flush pipe etc, complete all as specified and as directed by E-in-C (Make- Parryware/Cera/Jaguar) |
| 69 | S&F Vitreous China White Wash Down Water Closet Pan with P Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces including dismantling the existing unserviceable Water Closet, complete all as specified and as directed. |
| 70 | S&F in repair Jet spray with holder for EWC 1.5mtr long suitable for 15mm dia for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 71 | S&F in repair hand shower (health faucet) 1.00mtr long flexible tube & wall hook suitable for 15mm dia for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 72 | S&F in repairs vitreous china wash basin white oval type of size 560x 410 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed. |
| 73 | S&F in repairs in repairs Vitreous China Half stall urinal complete including providing and fixing plugs,spreader and bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement. |
| 74 | S&F in repairs PVC low level valve less symphonic action type flushing cistern of capacity 10 ltr including float valve, brackets, PVC short bend, complete all as specified and as directed. |
| 75 | S&F in repairs bevelled edge looking mirror of selected quality glass, 5.5 mm thick of size 2000 x 600 mm, PVC moulded case mounting on 6 mm thick AC building board or commercial ply wood on back and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 76 | S&F in repair towel rail chromium plated brass 600 mm long fixed with and incl CP brass screw |
| 77 | S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) |
| 78 | S&F in repair Over Head Shower square wall shower (Adjustable) of size (9”x9”) including all fittings and suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 79 | S&F in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug, complete all as specified and as directed. . |
| 80 | M&L in repair chromium plated peg set of 5 (PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and directed. |
| 81 | S&F in repair, Sheet Glass Shelf 500x125mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 82 | S&F in repair, corner shelf 300mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 83 | Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved, complete all as specified and as directed. |
| 84 | M&L for point wiring with modular accessories for light point/fan point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel modular boxes(1.6 mm thick sheet and min 50 mm deep) with suitable modules white cover plate fixed with nickel polished screws etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble, complete all as specified and as directed. by Engineer-in-Charge. |
| 85 | Ditto all as per srl item No. 81.00 above, but for one socket outlet 5 Amps on the same board controlled by one switch, complete all as specified and as directed. |
| 86 | S&F Modular switch piano flush type, 6 Amps, 240 Volt AC single pole, one way, complete all as specified and as directed. |
| 87 | Ditto as per srl item No. 83.00 above, but with 2.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor cable for one 3 Pin 15 Amp socket on independent board incl Modular cover plate and suitable metal sunken box of suitable modules including one 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories, complete all as directed by Engineer-in-Charge |
| 88 | S&F Modular switch piano flush type, 16 Amps, 240 Volt AC single pole, one way, complete all as specified and as directed. |
| 89 | S&F Modular socket out let 6 Amp, 5 pin, 2-in-1 flush type, complete all as specified and as directed. |
| 90 | S&F Modular socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type, complete all as specified and as directed. |
| 91 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 amp 240 V 10 KA, complete all as specified and as directed. |
| 92 | S&F LED lights fitting mirror type with high output diffuser 2 feet 10 watt 220 V AC decorative type with holder and LED lamp including connecting up with driver three core flexible copper conductors cable of suitable size, complete all as specified and as directed.Make: Crompton/Havells/Philips |
| 93 | S&F LED lights fitting 1x 20 Watt, 220V,AC smart extruded aluminium batten (4 ft) with higher efficacy with Microwave sensor to save more energy reduce the light intensity by 70 percent during non occupancy of person with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as directed by Engr-in-charge. |
| 94 | Taking down and refixing exahaust fan any make any size,removing electric connnections,dismantling blades etc,cleaning of motor,fan body and blades using detergent,greasing and oiling of serviceable fan,testing , complete all as directed. |
| 95 | M&L for rewinding of exhaust fan motor 240 Volt,50Hz,300 mm sweep,any make for any type with super enameled copper winding wire of existing size,same no of turns,wound with machine,providing insulation material of E-grading,varnishing,connection with flexible copper wire 0.472mm dia u[to connecting back, complete all as specified and as directed. |
| 96 | M&L in replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 6 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 6.0 Sqmm (as specified) complete with any type of civil work involved to make good disturbed surfaces , complete all as specified and as directed.Note : Two run of 6 sqmm wire and one run of 6 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit |
| 97 | S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal, complete all as specified and as directed. |
| 98 | S&F (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty, complete all as directed by Engr-in-charge. |
| 99 | S&F MCB Single pole and neutral 63 Amps 240 V, 10 KA, B curve as per, complete all as directed by Engr-in-charge. |
| 100 | S&F MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per, complete all as directed by Engr-in-charge. |
| 101 | Taking down and refixing geyser any make any size,removing electrical connection,dismantling water pipes connection etc,testing and refixing in position complete all as directed. |
| 102 | S&F in repair heating element 1500 Watt, complete all as specified and as directed.Make: Bajaj/Theeta/Dus Pass |
| 103 | S&F in repair thermostat for Geyser 35Ltr/25Ltr/15Ltr, complete all as specified and as directed.Make: Bajaj/Theeta/Dus Pass |
| 104 | S&F in replacement PVC connection hot and cold water pipe 450mm long15mm outer dia with brass nut and washer,both side complete all as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender