Tender For Special Repair Of Or Married Accn Block No P-7 (08 X Quarters) Of 23 Fad Suranussi Under Age (I) Suranussi
Tender Value
38 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Or Married Accn Block No P-7 (08 X Quarters) Of 23 Fad Suranussi Under Age (I) Suranussi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins arches etc |
| 2 | Demolition of cement concrete of any description and in any position (above /below of ground level) not otherwise specifically provided as in sunken floor ,plinth protection,foundation etc.. |
| 3 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) cement concrete is reinforced (reinforcement cut as required to facilitate demolition) |
| 4 | Taking down cement or cement lime plaster incl raking out joints hacking for keys srubbing down with water etc |
| 5 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each including iron mongries ,hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed |
| 6 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm and n.exc 4.0 sqm each including iron mongries ,hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed |
| 7 | Taking shutter only of any desription of size exc 1 sqm and n.exc 2sqm |
| 8 | Taking shutter only of any desription of size exc 1 sqm and n.exc 2 sqm and refixing in the same opening |
| 9 | M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6 mtr mean radius complete all as specified. |
| 10 | Ditto all as per item No 9 above but except brick work complete all as specified. |
| 11 | M&L 15mm thick cement plastering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. |
| 12 | M&L for 15 mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified. Note:- WDC shall be measured and paid for separately. |
| 13 | M&L for 5 mm th rendering in cement mortar in 1:3 on ceiling/sunken portion of slab complete all as specified. |
| 14 | Material and labour for preparation of affected concrete and steel surface as in ceiling of roof slab, beams & chajjas by cleaning with metallic wire brush scrupulously and carrying out the following operations stepwise :-(a) Applying rust remover solution on steel bars by using cotton waste swab or by brush and leave the surface for 15-30 minutes. Remover the loose rust particles by scrubbing with brush and wash the steel surface with water.(b) Apply red oxide primer over cleaned steel surfaces. Apply epoxy bonding agent (adherent solution) over cleaned dust freed old concrete surface. Apply polymer mortar with the help of trowel in single or multilayer as an when required during application and finishing the surface even and smooth.Notes :- (a) The bars which are corroded badly need to be strengthen by placing new bars by means of welding with proper splice length and will be measured and paid separately under appropriate item. The rate of item includes necessary formwork, shuttering, scaffolding, staging etc all as specified and directed by Engineer-in-Charge |
| 15 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) etc all as specified and directed by Engineer-in-Charge |
| 16 | S & F 1 mm thick Factory made Mild steel, plain sheet for cup board shutters with necessary angle iron frame including all fittings i.e mortice lock with handle ,butt hinges peg set etc including two coats of spray painting over a coat of red oxide primer etc. as required |
| 17 | S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial face on both faces including both face is covered with decorative/digital/CNC design type face veneer with including external teak wood lipping all as required complete all as specified and as directed |
| 18 | M&L for 35mm th IInd class HW glazed /gauged shutters open rebatd and prepared to receive glass /gauge etc without sashbars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc incl S & F of stainless steel wire mesh all as specified in SSR Part I section 8 clause 8.24 (a) etc all as specified and directed by Engineer-in-Charge |
| 19 | Supply & fixed factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat /Frame size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 20 | Providing and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER (more than two panel top,middle and bottom) solid Moulded/decorative type consisting of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings. |
| 21 | Supply & fixed factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat /Frame size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid Moulded/decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including magic eye brass best quality fixed in main door shutterall as per direction of EngineerIn- Charge. |
| 23 | S & F Factory made Anodised aluminium frame Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators etc fixed/sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of approved size,including size necessary joining cleats glazing clips, powder coated aluminium snap beading ,screws,including necessary anodised aluminium fittings like handles hook, EDPM rubber beading/gasket etc. complete all as specified |
| 24 | S & F Factory made Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) fixed type shutter without sash bar,hook and eye closure Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size/locking handle,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 25 | S & F Factory made Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) side openable type glazed or gauzed shutter without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,hook and eye closure,Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 26 | S & F Factory made Anodised aluminium powder coating grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. |
| 27 | S & F 4.8 mm thick black glass sheet ordinary quality glazing fixing in aluminium frame black or transparent in square n.exc 0 .5 sqm in each pane all as specified and directed by Engineer-in Charge |
| 28 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engineer-in Charge |
| 29 | M & L 18/19 mm thick Prelaminated plywood/Engineered wood like BWP Plywood or HDHMR , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet and shelves ,partitions and shelves of built-in cupboards including external teak wood lipping ,6mm thick fixed with nails all as specified and directed by Engineer-in Charge |
| 30 | S & F auto closing hinges 50 mm size of 0 crank OR 8 crank openable at 110 degree for kitchen cabinet shutters, of stainless steel grade SS-304, bright finish or electro galvanised complete as approved by GE. |
| 31 | S&F Continous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 40mm, complete all as specified and directed. |
| 32 | S&F stainless steel handles 125 mm size for kitchen cabinet shutters/ cupboard complete all as specified and directed. |
| 33 | S&F magnetic catcher of size 20mmx50mm suitable for kitchen cabinet shutters/ cupboard, complete all as specified and directed. |
| 34 | S & F Ball bearing runners 50 mm size Telescopic full extension load capacity 50 kgs, of stainless steel grade SS-304 complete as approved by GE. |
| 35 | S&F 300mm size stainless steel sliding door bolt plate type stove enamelled with bright bolt not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified |
| 36 | S & F in repair peg set of six made of stainlesss steel all as specified and as directed by engineer-in-charge. |
| 37 | S&F 150 mm size Stainless steel barrel tower bolts,stove with bright bolt and fixed etc all as specified |
| 38 | S&F 200 mm size stainless steel pressed handles, oval type, stove all as specified and directed by Engineer-in Charge |
| 39 | S&F 125 mm size stainless steel butt hinges medium weight |
| 40 | S&F floor door stopper aluminiumalloy body and tounge 140mm anodised with hard drawn steel spring etc |
| 41 | S&F 300mm size stainless steel (grade SS-304) Zinc alloy or spring steel, surface mounted automatic spring door closer for WPC Door spring including roller and roller plate complete |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rmoving servicable tiles to store and rubbish off the premises |
| 43 | M&L Granite (of any type) work 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including over and including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.all as specified and directed by Engineer-in Charge |
| 44 | M&L Non-skid coloured ceremic joint free tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 45 | M&L Non-skid coloured ceremic joint free tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 46 | Material and labour for glazed ceramic coloured tiles in vertical surface 450x 300 x 7mm /600x300x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour, with and including 10mm thick cement screed bed in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge |
| 47 | M&L 18-20 mm thick gang saw cut,mirror pre-polished,premoulded and prepolished Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over and including 20 mm th screed or bedding layer in CM 1:6 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge. |
| 48 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed and jointed with complete all as specified |
| 49 | Demolition of cement concrete is reinforced of any description and in any position not otherwise specifically provided for as specified and directed by Engineer - in - Charge . |
| 50 | Form work to soffits of suspended slab such as roof slab n exc 200mm thick (horizontal/sloping/vertical) with fair finished surface complete all as specified |
| 51 | M & L TMT bars 6mm to 8mm dia. cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified |
| 52 | M&L Reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in slabs supported on walls, beams, columns deck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge . |
| 53 | M & L Reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in Chajjas all as specified and directed by Engineer - in - Charge |
| 54 | S&F in repair vitreous china squatting pan ‘Orissa patten’ size 580x440mm white with intergral foot rest (excluding flushing cistern and flush pipe) with 110 mm \\"P' or \\"S\\" trap including water connection to trap and flushing pipe, flushing cistern etc incl lime concrete bedding and PCC 1:2:4 for making good the floor fixed in repair complete all as specified |
| 55 | S & F in repair PVC flushing cistern 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float handle and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including brackets complete all as specified . |
| 56 | S& F in repair vitrious china wash hand basin flat back 550X400mm with full padestal including fixing bracket, CP waste coupling , CP grating and waste pipe,etc all as specified and directed by engineer-in-charge. |
| 57 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc all as specified and directed by engineer-in-charge |
| 58 | S&F in replacement 20 mm dia harrison rails stainless steel with decorative finish , with fixing brackets , stops, rollers,finals complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM) |
| 59 | Dismantling brick tile or terracing tile single layer on roof jointed and pointed in cement mortar including removal of grass vegetation including roots near out let of RWP and OHT staging area or specifically ordered in writing compltete all as specified and directed |
| 60 | Demolition of mud phuska in roofs ,any thickness incl plastering and leeping (weather full thickness removed or part there of) and removing from site to a distance exceeding 250m but not exceeding 500m complete all as specified and directed by engineer-in-charge |
| 61 | M/L for PCC 1:5:10 type E2 with using 40 mm graded aggrgate as in filling,foundation and mass concrete in sunken floor all as specified and directed by engineer-in-charge |
| 62 | Supply only Integral water proofing compound complete all as specified and as directed by engineer-in-charge. |
| 63 | Supply and fixing 40 mm bore unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches for drainage spout pipeupto outside of outer wall (Approx 450 mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and directed |
| 64 | M & L for repairing of RCC projections ,chajjas,roofs,facia,etc.by necessary preparations i.e.scrapping cutting,chiseling,dusting and cleaning exposed reinforcement ,surface of damaged,loose RCC surface and applying one coat of cement slurry and filling the surface with cement cencrete (1:2:4) using 12.5mm garded crushed stone aggregate and finished with cement sand mortar (1;3) using coarse sand in patches area n exc 5 sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the bexisting surface in at any height all as directed by Engineer-In-Charge Note : Cost of form work for bldg ht upto 12m ,shall be deemed to be included in unit rate quoted by the contractor. |
| 65 | M&L for Given sunken floor shall be treated as per following instructions and directed by Engr in Charge :-(A) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or miling to remove cement laitance, existing coatings and achieve a gripping profile that is clean dry and free from laitance and any other form of surfece contamination. The installation instructions n manufacturer's published literature should be strictly complied with, includingf but not limited to the following:-(aa) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putty/Dr fixit 302 SBR latex/ Perma Latex SBR/ FOSROC Nitabond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, Wire brush, hair brush & vacuum pressure if required.( |
| 66 | bb) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO.(cc) Whilist the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO of viscosity as per manufacturer's instructions.(dd) Apply glass febric sheet of Sika Fab 1/FOSROC/ DR Fixit/ STP whilist the first coat is wet.(ee) Once touch dry, apply second coat of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO of viscosity as per manufacturer's instructions on the entire area.(ff) Second coat shall be applied 6-8 hours of application of previous coat and in the direction right angle to the previous coat.(gg) The waterproofing coating should be taken to a height minimumn300 mm above the finished floor level on the vertical surface.(hh) It is essential to cure Acrylic modified Cementitious coating immediately after application (minimum 6-8 hours drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. |
| 67 | A protection plaster 15mm thick in CM 1:3 admixed with appropriate Integral water proofing compound has to be applied on the walls. |
| 68 | Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika Plastocrete over the applied water proofing coating on horizontal surface.(kk) All the corners and joints should be pretreated with an elastic waterproofing sealing tape withy a wooven bonding mesh on each surface ab=nd an elastic expansions zonbe in the centre of (ll) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations.(mm) Waterproofing/Sunken floor treatment has to be carried out through applicators authorised by the respective manufacturers and approved by GE. Admixture for item 66 & 67 : SIKA Plastocrete Plus/ FOSROC/DR Fixit/ STP/CICO confirming to IS 2645 |
| 69 | Supply and applying of crack bridging water proofing sealing tape, Sika deal F tape. |
| 70 | M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate ) as in benching ,roof padding, roof kerbs or muds stops coping etc rounded or chamfered on edges complete all as specified and directed. (bldg ht may vary upto 10.00mtr). |
| 71 | M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately. |
| 72 | Cleaning the surface and made free of dirt,foreign particle,laitance followed by grinding all protrusion to make surface modulated.there after inspection for cracks on the surface caused by thermal expiation contraction.cutting the grooves with suitable cutter machine in V groove filled with repair mortar/micro concrete general purpose grout as recommended proportionally as per recommendation of manufacturer.making of gollas as all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight complete all as specified and directed.NOTE :- Unit rate quoted shall also include for removal of existing PVC water storage tank,water pipe line ,gate valve carefully and refixing at the same or other position after completion of roof repair work |
| 73 | Providing and applying liquid Polyurea-PU based hybrid elastomeric water proofing membrane including fibre mesh between the PU coats at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats. The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two- three coats. The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application. Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system. including Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm. |
| 74 | M&L for 75 mm th cement concrete type C-2, 1:3:6 as in plinth protection and path finishing the surface even and smooth without using extra cement with using 40mm graded stone aggregate incl making joints at every 2.5m and at corner etc complete all as specified and as directed by engineer-in-charge. |
| 75 | Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity |
| 76 | S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 |
| 77 | Taking up/ down GI tubing and connections with all fittings 15 mm bore |
| 78 | Ditto all as per item No 76 above but 20mm bore |
| 79 | S&F 15 mm dia GI water tubing ,medium grade with all fittings complete to wall and ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making goods the same with cement concrete 1:2:4 including laid in floor etcetc complete all as specified and as directed by engineer-in-charge. |
| 80 | ditto all as per item No 78 above but fixing only |
| 81 | S&F 20 mm dia GI water tubing ,medium grade with all fittings complete to wall and ceiling or laid in floors including making hole in RCC slabs for vertical pipes & making goods the same with cement concrete 1:2:4 including laid in floor etcetc complete all as specified and as directed by Engineer-in-charge. |
| 82 | ditto all as per item above 80 but fixing only |
| 83 | M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 84 | S&F in repair brass chromium plated shower rose of 150 mm size (Square shape) and 450 mm long CP arm, with or without swivel joints including fixing to steel pipe or union all as specified and directed by Engineer - in - Charge. |
| 85 | S&F PVC connection 15mm size with PTMT nuts of length 450 mm all as specified and directed by Engineer - in - Charge. |
| 86 | S&F in repair 15mm CP Bib taps long body , cast copper alloy with CP Cup,crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 87 | S&F in repair 15mm size brass stop valves/angle valve with CP Cup, crutch or butterfly handles high pressure screwed both ends for iron pipe |
| 88 | S&F in repair 15mm bore dia stop valves brass but fancy type, with long shank and CP Cup suitable for 15 mm pipe line with protection cap complete in all as specified and directed |
| 89 | S&F in repair 20mm dia of bore size Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 90 | S&F in repair fancy type stainless steel brass chromium plated towel rail size 600mm long including a pair of brass bracket complete all as specified and directed |
| 91 | S&F in repair for CP Towel Ring roung with round flange fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 92 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 93 | M&L preparing new surfaces of walls and applying two coats of oil bound distemper over a coat of primer including a coat of 2 mm thick wall care putty to achieve smooth finish etc all as specified |
| 94 | M&L for Complete removal of existing treatment of walls scrapping by mechanical means and preparing old decorated plastered or unplastered surface of walls and applying two coats of oil bound distemper using mechanical/smart periodical over a coat of primer and over and including a coat of 1 mm thick wall care putty to achieve smooth finish surface on wall complete all as specified |
| 95 | M&L for preparing newly plastered surface of wall /roof/Chajja projections incl facia cornices and pplying two coats of weather proof exterior emulsion paint over a coat of exterior primer incl 2 mm thick wall care putty where required as per design/pattern given by Engineer-in-Charge etc. complete all as specified and directed by Engineer-in-Charge Note :- Emulsion to be carried out through air less spray machine (Mechanical means) shade and coloured as approved by Engr-in charge |
| 96 | M&L for preparation of old plastered or unplastered surface of wall /roof/Chajja projections incl facia cornices including brooming down or steel wire brushing scrapping down smoke roof,moulds moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of weather proof exterior emulsion paint including over a coat of exterior primer incl 2 mm thick wall care putty where required as per design/pattern given by Engineer-in-Charge etc.Complete all as specified and directed by Engineer-in-Charge Note :- Emulsion to be carried out through air less spray machine (Mechanical means) shade and coloured as approved by Engr-in charge |
| 97 | M&L for preparation new plastered surfaces of ceiling and applying three coats of white wash on newly plastered ceiling surfaces |
| 98 | M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash on ceiling surface all as specified |
| 99 | M&L for two coats synthetic enamel paint on new wooden surface over 10 cm width or girth over a coat pink primer all as specified |
| 100 | M&L for one coats synthetic enamel paint on old treated wooden surface over 10 cm width or girth all as specified |
| 101 | M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer etc all as specified |
| 102 | M&L for one coat of synthetic enamel paint on old treated steel surface over 10cm width or girth etc all as specified |
| 103 | M&L PCC 25mm th 1:2:4 type B-0 using 12.5 mm graded stone agg as in levelling course. |
| 104 | S&F in repair PVC SWR pipe 100 mm bore single socketed in any length with rubber ring joints fixed to walls/floor including taking down existing one etc all as specified |
| 105 | S&F in repair PVC SWR pipe 75mm single socketed in any length with rubber ring joints fixed to walls including taking down existing one etc all as specified |
| 106 | S&F PVC (SWR) 110 mm dia type bends and shoe any radius complete all as specified |
| 107 | S&F PVC (SWR) 75mm dia type bends any radius complete all as specified |
| 108 | S&F 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified |
| 109 | S&F PVC SWR pipe 110 mm dia Branch pieces (Single T),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door complete all as specified |
| 110 | S&F PVC SWR pipe 75 mm dia Branch pieces (Single T),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door complete all as specified |
| 111 | S&F PVC SWR pipe 110 mm dia Branch pieces (Single Y),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door etc complete |
| 112 | S&F PVC SWR pipe 75 mm dia Branch pieces (Single Y),single (equal or unequal ) ordinary or inverted or with parallele branches with oval access door complete all as specified |
| 113 | S&F PVC SWR pipe 110 mm Junction vent cowl including taking down existing one etc complete all as specified |
| 114 | S&F PVC SWR pipe 75 mm Junction vent cowl including taking down existing one etc complete all as specified |
| 115 | S&F PVC SWR Floor trap pipe 75 mm dia outlet pipe ,plain with grating including jointing with solvent cement etc complete all as specified |
| 116 | S&F in repair 100 mm dia Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified |
| 117 | S&F in repair 75 mm dia Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified |
| 118 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610 mm x 460mm bowl size 510mm x 430mm x 160mm incl waste coupling and 32 mm bore waste pipe etc |
| 119 | S& F Pillar taps swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 120 | S&F in repair chromium plated grating 100/125 mm Square/circular, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed. |
| 121 | S&F 5 mm thick toughened Glass corner including CP railing, radius 300mm complete all as specified and directed. |
| 122 | Providing and fixing 600x120x5 mm toughened Glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 123 | S&F in repair sink mixer for mixing valve 15 mm dia wall mounted with 150/165 mm long swivel spout ,connecting legs and wall flanges,hot and cold CP Brass fancy including joints to steel pipe or unions,including fittings, complete all as per manufacturer's instruction |
| 124 | S&F in repair wall mixer with bend pipe for overhead shower mixing valve hot and cold water screwed down for iron pipe 15 mm dia CP Brass fancy screwed both ends iron pipe with provision of overhead shower complete with 165 mm long bend pipe on upper side ,connecting legs and wall flange complete all as per manufacturer's instruction |
| 125 | Providing and fixing factory made stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 126 | Taking down carefully surface aluminium or copper point wiring on TW Batten/in conduit/ with PVC casing-caping/conduit (light, fan, socket, or power) complete and making good the disturbed surface of wall/celling etc including taking down fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and removing material from site and taking credit as per schedule of credit complete all as specified. |
| 127 | M & L for concealed Point wiring complete with 1.5 Sqmm (nominal area) 1100 volts grade single core PVC insulated FR-LS multistranded copper conductor cable in and including medium grade duty PVC conduit not less than 20 mm including fitting & accessories, with modular metal flush box with white cover plate and frame and dummy plate as per required modular plate at site for mounting switch, socket etc for one light/fan/bell point controled by one switch and (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm. stranded copper conductor with green FRLS PVC insulating earth common earth dolly, complete all as specified. |
| 128 | All as per above item Serial No.126 One socket outlet 6 amp controlled by one switch on the same board with other switches |
| 129 | All as per above item Serial No. 126 One socket outlet 6 amp controlled by one switch on indepdendent board |
| 130 | All as above item No 126 but M & L Point wiring with 1100 volts grade single core PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and with modular metal flush box with white cover plate and frame and dummy plate as per required modular plate at site one 16 amp socket outlet controlled by one switch on independent board complete. |
| 131 | All as per Item No. 126 here-in-before but for one light point controlled by two numbers, 2 way switches. |
| 132 | S & F Modular switch 1 way 6A, 1 module |
| 133 | S & F Modular switch 1 way 16A, 1 module |
| 134 | S & F Modular switch 2 way 6A, 1 module |
| 135 | S & F modular socket, 6A - 2/3 pin combined 2 module |
| 136 | S & F modular socket 6A/16A-2/3 pin combined 2 module |
| 137 | M & L of lamp holder, PVC/ polycarbonate type complete and including taking down unserviceable lamp holder of any description complete all as specified |
| 138 | Supply and fixing of LED lights fitting 1 x 20 W, 220 V LED batten type with aluminium housing connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complect as specified |
| 139 | Supply and fixing of LED lights fitting mirror type with high output diffuser 2 feet, 10Watt 220 V with aluminium housing LED batten type connecting up with three core flexible copper conductor cable of suitable size complete all as specified |
| 140 | S & F ceiling rose 65x50mm 3 terminals polycarbonate body complete. |
| 141 | Supply and Fix modular fan step regulator, 120W-2 module |
| 142 | S & F for MCB DB SPN 8 way double door IP 43 complete prewired including Bus Bar with earth bar and neutral bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed . |
| 143 | Supply and fixing sheet steel metal enclosure (DB) triple pole and neutral 4 way Double Door 415 V, with 200 amps rated bus bar complete all as specified and directed. |
| 144 | Supply and fixing MCB's single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity 'B' curve.complete all as specified & directed. |
| 145 | Supply and fixing MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'B' curve.complete all as specified & directed. |
| 146 | Supply and fixing 415 V , 10 KA 'C' curve miniature circuit breaker (MCB's) of capacity 63 Amps TPN. complete all as specified & directed. |
| 147 | S&F in repair of bell AC single pole Ding Dong type 230 volt all as specified. |
| 148 | S&F of modular bell push 6 Amps 1 module complete all as specified. |
| 149 | S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable of suitable size complete all as specified |
| 150 | M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase)concealed conduit circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in and including PVC rigid non metallic medium grade conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable shall be paid as one unit length) |
| 151 | M& L for painting of ceiling fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc compete all as specified and directed . |
| 152 | Supply & fix exhaust fan, steel body copper wound heavy duty AC single phase. 230V,50 Hz,1350rpm of size 300 mm sweep with, blades, and frame andlouvers all as specified. |
| 153 | Supply & fix exhaust fan, made of sturdy Engineering plastic complete with lovers shutter voltage 230V 50 HZ 1200 RPM copper winding of size 250 mm sweep with, frame all as specified. |
| 154 | Supply and fix electric water heater, storage type body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection pipes (stainless steel) etc.all as per directed. |
| 155 | Earthing complete with galvanised steel earth plate electrode 60x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on complection., earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate with 1 nos MS handles of 8mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified. |
| 156 | M&L opening for exhaust fan cuttings of holes in PCC or through bricks walls 250 to 300 mm dia making good in cement mortar 1:3 or cement concrete 1:2:4 type B2 as required making good the disturbed portion.all as specified and directed. |
| 157 | M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase)concealed conduit circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 4.00 Sqmm (FRLS) in and including PVC rigid non metallic medium grade conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 4.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.(Note :- Two runsof 4.00 Sqmm cable & one run of 4.00 Sqmm cable shall be paid as one unit length) |
| 158 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant toughened glass complete with driver, with 25 mm dia light grade GI pipe bracket 1 metre long with clamp,bolt,nut etc. and lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete. |
| 159 | Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with single MCB 20 Amp 240 V for geyser all as specified. |
| 160 | Supply ,laying and testing cable XLPE insulated ,screened ,PVC bedded ,galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium condutor of size 25 sq mm 4 core . |
| 161 | Excavation in trenches in Soft/disntegrated not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of GI pipe etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in Soft/loose of soil complete all as specified & directed by Engr-in-Charge. |
| 162 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/loose soil, all as specified & directed by Engr-in-Charge. |
| 163 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point soft /loose soil all as directed by Engr-in-Charge. |
| 164 | M&L for sand cushioning to under ground cable using sand and gently punning to cushioning to cable complete all as directed by Enginner-in-charge . |
| 165 | Supply and fix common burnt clay building brick Sub class B designation 75 all as specified and directed. |
| 166 | S&F repair ,40 mm bore GI tubing \\"light garde \\"in treches on pole for protection of cables complete all as specified & directed by Enginner-in Charge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender