Tender For Repair/Replacement To Plumbing, Tiling, Sanitary Fittings And Joinery Incl Repair To Doors, Windows, Cupboards, Kitchen Cupboards At Kabul Line (Offrs), Capt Anuj Nayyar Road, Messes (Engr, 1/5 Gr, Delhi Area) And Nc Hut And Otm Accn In Th
Tender Value
48 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
20 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Plumbing, Tiling, Sanitary Fittings And Joinery Incl Repair To Doors, Windows, Cupboards, Kitchen Cupboards At Kabul Line (Offrs), Capt Anuj Nayyar Road, Messes (Engr, 1/5 Gr, Delhi Area) And Nc Hut And Otm Accn In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Complete removal of existing treatment of old surface of wall and applying 1mm thick putty again sanding and appying two coats of acrylic emulsion paint interior grade over a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 2 | Complete removal of existing treatment of old surface of ceiling and applying 1mm thick putty again sanding and appying two coats of acrylic emulsion paint interior grade over a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 3 | Preparation of old decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth to recieve further finishes complete all as specified and all as directed. |
| 4 | Applying two coats of oil bound distemper on wall surfaces complete all as specified and directed. (Note : Finishing coat to be applied with roller). |
| 5 | Applying one coats of Oil Bound distemper on ceiling surface complete all as specified and directed. (Note : Finishing coat to be applied with roller). |
| 6 | Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 7 | Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 8 | M&L for preparation old decorated external wall surface and applying two coats of Cement base paint complete all as specified and directed by Engr-in-charge. |
| 9 | M&L for Non-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cement mortar 1:6 including dismantling of old tiles removing rubbish off the premises complete all as specified and as directed |
| 10 | M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size exceeding 0.11 sqm and size not exc 0.18 sqm as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles with backing and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed. |
| 11 | M&L for Vitrified coloured ceramic tiles light shade 9 to 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36 Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed. |
| 12 | M&L for Vitrified coloured ceramic tiles light shade 9 to 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each as in vertical surfaces of dados/ skirtings/sides of pillars etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing layer in cement mortar 1:4 including dismantling of old tiles with backing, and removing rubbish off the premises complete all as specified and as directed. |
| 13 | M&L for Vitrified ceramic tiles light shade 9 to 10mm thick (square/rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) including dismantling of old tiles with backing and removing rubbish off the premises complete all as specified |
| 14 | M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter concept in matching pattern of size 1200 x 600 x 7 to 8 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 15 mm thick backing coat in CM (1:4) and dismantaling of old tiles complete all as specified and directed. |
| 15 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 16 | 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms,dado/wall and like over and incl 15mm thick cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite, including rounding of edges complete all as specified and as directed |
| 17 | Taking up or down steel tubing and connections 15mm bore complete. |
| 18 | Taking up or down steel tubing and connections 20mm bore complete. |
| 19 | M&L Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete. |
| 20 | Description all as per Srl item No 19.00 above but 20mm bore complete. |
| 21 | Taking down CP brass mixer any type |
| 22 | S&F for Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) (Make: Jaquar cat part No CON-281KN or Kohler cat part No K-98755IN-4-CP or Hindware cat part No F730022) |
| 23 | S&F for Sink Mixer with Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges (Make: Jaquar cat part No CON-309KNM or Kohler cat part K-20591IN-4-CP or Hindware cat part No F730023) |
| 24 | S&F for Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses (Make: Jaquar cat part No CON-169KNB or Hindware cat part No F730009) |
| 25 | S&F for Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses (Make: Jaquar cat part No COP-001BPM or Hindware cat part No F520011) |
| 26 | Taking down CP brass fancy type stop valve any type |
| 27 | S&F Angular Stop Cock - 2 Way with wall flange (Make: MARC cat part no MJN-1410 or Hindware cat part No F730006) |
| 28 | S&F for Angular Stop Cock with Wall Flange (Make: Jaquar cat part No CON-059KN or Kohler cat part K-11568IN-7B-CP or Hindware cat part No F730039) |
| 29 | Taking down shower rose with arm complete any type and size |
| 30 | S&F for Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System (Make: Jaquar cat part No OHS-35497 or Kohler cat part K-22645IN-CP or Hindware cat part No F160103) |
| 31 | S&F for Shower Arm Casted 160mm Long Light Body Round Shape for Wall Mounted Showers with Flange (Make: Jaquar cat part No SHA-477 or Kohler cat part K-22645IN-CP or Hindware cat part No F200028) |
| 32 | S&F in repair Plastic water closet seat cover White closed pattern with recessed bottom and cover and mild steel chromium plated hinging device, fixed in repairs complete. (Make : Jaquar/ Hindware/ Kohler) |
| 33 | Taking down flushing cistern any type |
| 34 | S&F for Wall Hung Cistern with 39mm Drainage L-Bend Pipe with Gasket & Installation Kit(Make: Jaquar cat part No JAH-WHT-184NL or equivalent in Kohler/ Hindware) |
| 35 | Taking down bib tap fancy type |
| 36 | S&F Bib Cock with Wall Flange (Make: Jaquar cat part No CON-047KN or Kohler cat part K-16093IN-4-CP or Hindware cat part No : F730041) |
| 37 | Taking down any type of toilet paper holder |
| 38 | S&F for Toilet Roll Holder with Stainless Steel Flap. (Make: Jaquar cat part No AKP-35753PS or Kohler cat part K-5633IN-CP or Hindware cat part No : F880003) |
| 39 | Taking down any type of towel ring |
| 40 | S&F for Towel Ring Square. (Make: Jaquar cat part No AKP-35721P or Kohler cat part K-5631IN-CP or Hindware cat part No : F580003) |
| 41 | Taking down any type of towel rack/rail |
| 42 | S&F for Towel Rack with Lower Hanger (Stainless Steel) with hook. (Make: Jaquar cat part No AHS-1581H or Kohler cat part K-25066IN-CP or Hindware cat part No : F580008). |
| 43 | S&F for Single Towel Rail 600mm Long, Stainless Steel (Make: Jaquar cat part No ACN-1111SM or Kohler cat part K-25065IN-CP or Hindware cat part No : F890011). |
| 44 | Taking down any type of soap dish |
| 45 | S&F for Soap Dish Holder. (Make: Jaquar cat part No ACN-1131N or Kohler cat part K-5634IN-CP or Hindware cat part No : F580004). |
| 46 | Taking down any type of glass shelf |
| 47 | S&F for Corner Glass Shelf (with Bracket). (Make: Jaquar cat part No ACN-1173 or equivalent in Kohler/Hindware) |
| 48 | S&F for Glass Shelf 600mm Long. (Make: Jaquar cat part No AKP-35771P or Kohler cat part No K-5636IN-CP or Hindware cat part No : : F880010) |
| 49 | Taking down any type of urinal |
| 50 | S&F for Urinal with Spreader Hole and Fixing Accessories, Size: 355x340x535 mm (Make: Jaquar cat part No URS-WHT-13261H or Kohler cat part No K- 26475IN-ER-0 or Hindware cat part No 60002) |
| 51 | S&F in repair Sensor Flushing Valve for Urinal/WHB with Complete Kit (Battery Operated)(Make: Jaquar cat part No SNR-51097 or Kohler cat part No K-24199IN-C01-CP or Hindware cat part No F860083) |
| 52 | Taking down health faucet any type |
| 53 | S&F for Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook(Make: Jaquar cat part No ALD-573 or Kohler cat part No K-12925IN-CP or Hindware cat part No F160122) |
| 54 | S&F PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, in repairs complete. (Make : Jaquar/ Hindware/ Bathsense) |
| 55 | Taking down Wash down water closet any type complete |
| 56 | S&F for floor mounted Single Piece WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 370x670x720 mm, S Trap- 220 mm complete (Make: Jaquar cat part No LYS-WHT-38851S220UFSMN or Kohler cat part No K-3983IN-S-0 or Hindware cat part No 92099 (S-30)) |
| 57 | S&F for \\"Rimless Blind Installation Wall Hung WC With UF Soft Close Slim Seat Cover, Hinges, Accessories Set, Size: 380x520x365 mm\\" (Make: Jaquar cat part No ACS-WHT-87953BIUFSM or Kohler cat part No K-20217IN-S-0 or Hindware cat part No 92566) |
| 58 | S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specifed and directed. (Make : Jaquar/ Hindware/ Kohler) |
| 59 | S&F in repair vitreous china one piece counter top wash basin, white, of size 410x410x160 mm / 570x420x195 mm / 615x415x150 mm including coupling, bottle trap/waste pipe complete all as specified and directed. (Make : Jaquar/ Hindware/ Kohler) |
| 60 | S&F in repair vitreous china wash basin, white, flat back including full pedestal, size 560x415x200mm excluding taps, chain and plug and porcelain stopper but including brackets, coupling, bottle trap/waste pipe complete all as specified and directed. (Make : Jaquar/ Hindware/ Kohler) |
| 61 | S&F in repairs Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor, complete all as specified and directed. |
| 62 | S&F in repair looking mirror of selected quality sheet glass 5.5 mm thick designer with chromium plated brass screw and cup washer complete all as specified and directed. |
| 63 | S&F in repair PVC (SWR) floor trap, plain with grating (waste hole/plain type) including jointing with solvent cement, 75 to 100 mm mm diameter of outlet, all as specified. |
| 64 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 but not exc 1000 ltrs and from mouth of circulating pipes with suitable chemical or solvent as per manufacturer's instruction duly taking care not to damage etc including disconnecting, reconnecting & refixing water tanks in position complete. |
| 65 | Dismantling water tanks exc 500 but not exc 1000 Ltrs capacity and removing to store. |
| 66 | S&F tripple layer Rotational moulded HDPE Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted including threaded type lid and fixed in position completeall as specified in SSR Part I etc complete. |
| 67 | Description all per srl item No 65.00 as above but 1000 ltr capacity complete all as specified and directed |
| 68 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete. |
| 69 | S&F in repair Gun metal gate valve with iron wheel head screed both ends for iron pipe and fixed 20mmm bore complete |
| 70 | Dimantling of soil, rain water pipes, eaves gutters, cast and vent pipes of any dia, any pattern including all fittings |
| 71 | S&F for PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls |
| 72 | S&F for PVC (SWR) bends any radius 110 mm bore |
| 73 | S&F for PVC (SWR) Tee any radius 110 mm bore |
| 74 | S&F for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipecomplete all as specified and directed. |
| 75 | S&F for Unplasticised 50mm bore PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe |
| 76 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified |
| 77 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete. |
| 78 | Taking down shutters of any description exc 1 sqm not exc 2 Sqm each complete. |
| 79 | Taking down shutter and refixing in same opening exc1 sqm not exc 2 sqm |
| 80 | S&F for Pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., filling back of chowkhat with PCC 1:3:6 type C-1, complete all as specified and directed by E.I.C. |
| 81 | S&F for Pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., filling back of chowkhat with PCC 1:3:6 type C-1, complete all as specified and directed by E.I.C. |
| 82 | S&F for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 83 | Forming jambs, etc. to openings (to foregoing item), CM 1:6 including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 84 | Making good under cills or over arches, lintels and bressummers. Inc cement Mortar 1:6 luding allpinning when necessary |
| 85 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004. |
| 86 | S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement coplete as per specification and shown on drawing SSR Part-II (2020). |
| 87 | Factory made Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 88 | Factory made, Plain framed panelled shutters of 2nd class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed. |
| 89 | Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 90 | S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 91 | S&F in repair for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 92 | S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples |
| 93 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples |
| 94 | Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying twocoat of synthetic enamel paint, over a coat of primer complete all as specified and as directed. |
| 95 | S&F for powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 96 | S&F for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & directed |
| 97 | S&F for Door closer hydraulically regulated, aluminum (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. |
| 98 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 99 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 100 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm) T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass. |
| 101 | S & F 8mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 102 | S&F Top patch (Model No-IPF-2 of make- Insta or equivalent as approved by GE complete all as specified and as directed. |
| 103 | S&F Bottom Patch (Model No-IPF-3 of make- Insta or equivalent as approved by GE complete all as specified and as directed. |
| 104 | S&F Top Pivot (Model No-IFC- GDP-105 of make -Insta or equivalent as approved by GE complete all as specified and as directed. |
| 105 | S&F Bottom and Top corner patch lock (Model No-IPL- 1 of make- Insta or equivalent as approved by GE complete all as specifed and as directed. |
| 106 | S&F Door handle H type 25x300mm (Model No-IGH- 55 of make. Insta or equivalent as approved by GE complete all as specified and as directed. |
| 107 | M&L for ETICHING on 12 mm thick TOUGHENED glass as per the design approved. NOTE: Unit rates are deemed to be including of necessary designing charges and all other required accessories complete all as specified and as directed. |
| 108 | M&L for Grinding, polishing /bevelling of edges on 12mm thick toughened glass complete all as specified and as directed. |
| 109 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 110 | S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc |
| 111 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified . |
| 112 | S&F Extruded aluminum alloy handle, fabricated type, anodized 125mm size. |
| 113 | S&F Extruded aluminum alloy handle, fabricated type, anodized 150mm size. |
| 114 | S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete. |
| 115 | S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete. |
| 116 | S&F in repair Door closer hydraulically regulated, aluminium body, designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete. |
| 117 | S&F in repair Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed. |
| 118 | S&F in repair fancy type Curtain rods decorative type stainless steel 25mm nominal dia of approved quality(Make VISTA) (1mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 1.80m long) complete all as directed and specified. |
| 119 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete. |
| 120 | M&L for 5.5 mm thick Sheet glass, ordinary quality and glazing with beads in square not exc 0.5 sq. m in each pane complete all as specified and directed. |
| 121 | S&F for Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane 5.00mm thick all as specified |
| 122 | S&F in repair 4/5/6/7 lever aluminum Mortice lock, vertical type, size 100 mm |
| 123 | S&F in repair Godrej ELC 01-6 Levers Mortise Door Lock Handle Set with 2 Keys, Suitable for Left & Right Handed, Inside & Outside Opening Door Handle Set, Satin Steel Finish complete all as specified and directed. |
| 124 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished |
| 125 | S&F in repair SS Drawer handles, projection drop (50mm to 65mm) on screwed plate complete |
| 126 | S&F stainless steel peg set (set of 06 hook) fixed with screw and PVC gutty on wall in position as per sample kept in GE office complete all as specified . |
| 127 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 128 | M&L for Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exc.6mm) making jointless by filling including cutting etc complete all as specified. |
| 129 | M&L Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to FE 290 gde E-165 complete all as specified and directed |
| 130 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl taking down existing CGI sheet complete all as specified. |
| 131 | S&F for 2mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc. including dismantling of old sheet complete all as specified. |
| 132 | Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint, over a coat of primer complete all as specified and as directed. |
| 133 | Dismantling of old cabinet, cupboard/ wardrobe complete all as specified and as directed. |
| 134 | M&L for Modular kitchen & Wardrobe / cupboard with 18 mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board levies of action Tesa and equivalent including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic type) etc or sliding with track arrangement as directed including necessary accessories like stainless steel handle, Magnetic catch etc and steel baskets of required size mounted on suitable channels with ball bearing to moving of baskets smoothly including all necessary fittings and fixture and 8mm thick both sides Prelaminated BSB (Both side balancing proper ) HDHMR of Action Tesa and equivalent as per IS:14587:1998 fixed. Note: Kitchen accessories ie baskets, cutlery baskets will be measured and paid separately as supply only. |
| 135 | Stainless steel Cutlary basket of size 370mmx485mmx100mm made of min 4mm dia stainless steel wire and bottom of S S perforated sheet approved quality as approved by Engr-in-Charge. (Make: Godrej Cat Part No 6132 or equivalent approved by Engr-in-Charge) |
| 136 | Stainless steel thali basket of size 370mmx485mmx200mm made of min 4mm dia stainless steel wire of approved quality as approved by Engr-in-Charge. (Make: Godrej Cat Part No 6136 or equivalent approved by Engr-in-Charge. |
| 137 | Stainless steel basket (plain) of size 370mmx485mmx150mm made of min 4mm dia stainless steel wire of approved quality as approved by Engr-in-Charge. (Make: Godrej Cat Part No 6121 or equivalent approved by Engr-in-Charge. |
| 138 | S&F in repair soft closing hinges L Bihari complete all as specified and as directed by Engr-in-Charge. |
| 139 | S&F in repair Telescopic channels 300mm long of chromium plated steel, superior quality with stainless steel ball rollers for fixing to cabinets drawers. complete all as specified and as directed |
| 140 | S&F WPC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam WPC sheet. The panel & strips shall be Density of 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two WPC strips. The WPC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm (±0.25 ) thick WPC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement including all fixing assecerories, moulding, corner beads including dismantling of existing wall paneling complete all as specified and as directed by Engr-in-Charge. (Make- rajshree or equivalent) |
| 141 | S&F for 1 mm thick Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges 100 mm dia including brackets complete all as specified and directed by Engr-in-Charge. |
| 142 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bedding in CM 1:6 including dismantling of old complete all as specified and directed by Engineer-in-Charge. |
| 143 | M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick screed bedding in CM 1:4 as in riser of steps, skirting, dado and pillar including dismantling of old complete all as specified and directed by Engineer-in-Charge. |
| 144 | M&L for Mirror polishing on marble/ granite/ Kota stone/ Dholpur stone / stone work where ever required to give high gloss finish complete. |
| 145 | Complete removal of existing treatment of old surface of wall/ceiling and applying two coats of Asian paint Smartcare HYDRO LOC or Dr fixit Sure seal or Asian paint Smartcare Dampproof and applying 1mm thick putty with waterproof compound again sanding and appying two coats of acrylic emulsion paint interior grade over primer complete all as specified and directed by Engineer-in-Charge. |
| 146 | M&L for full body Vitrified coloured tiles 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36 Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed. |
| 147 | Factory made Flush door shutters 35mm thick solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed. |
| 148 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender