Tender For Provison Of 200 Smb (Otm Accn) Incl Cook House Cum Dinning Hall And Coy Office For Depot Coy At Grrc Lansdowne.
Tender Value
16.98 Crore
Estimated cost
Bid Submission
18 Sep 2026
26 days left
EMD
11.74 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provison Of 200 Smb (Otm Accn) Incl Cook House Cum Dinning Hall And Coy Office For Depot Coy At Grrc Lansdowne.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE A PART-I (BUILDING WORK) |
| 2 | Design,supply,fabricate, errect, construction and execution of OTM Accn (G+2) for 80 OR(Approx Plinth Area 559.07sqm X3) including sanitary block on ground, first& second floor,Study Room, Store Room & Common Room based on given line plan including all fittings and fixtures like doors, windows, tiling, false ceiling, painting, curtain rods,Mirrors Plinth protection, PCC saucer drain around bldg complete all as specified and as directed. Note-1.Provision of Green Building Norms for minimum GRIHA 3-Star Rating must be incorporated during design .Contractor shall hire consultancy/agency responsible for green building norms and shall provide min 3 star rating certificate.Rate of the same will be included in the quoted rate. 2.Internal Electrification & Internal Water Supply Item will paid under relevant schedule. 3.For Structural & Technical/architectural Specificaton refer the DBR(Detail Basis Report) attached in the Tender Document. |
| 3 | Design,supply,fabricate, errect, construction and execution of OTM Accn (G+2) for 40 OR (Approx Plinth Area 360.75sqm X3) including sanitary block on ground, first& second floor,Study Room, Store Room & Common Room by using LGSF technology based on given line plan including all fittings and fixtures like doors, windows, tiling, false ceiling, painting, curtain rods,Mirrors Plinth protection, PCC saucer drain around bldg complete all as specified and as directed. Note-1.Provision of Green Building Norms for minimum GRIHA 3-Star Rating must be incorporated during design .Contractor shall hire consultancy/agency responsible for green building norms and shall provide min 3 star rating certificate.Rate of the same will be included in the quoted rate. 2.Internal Electrification & Internal Water Supply Item will paid under relevant schedule. 3.For Structural & Technical/architectural Specificaton refer the DBR(Detail Basis Report) attached in the Tender Document. |
| 4 | Design, supply,fabricate, errect, construction and execution of OTM Accn (G+2) for 80 OR(Approx Plinth Area 847.6sqm X3) including sanitary block on ground, first& second floor,Cook house(Cook Room,Fuel Store,Fresh Store,Meat Store,Dry Store,Pan Wash) ,Dining Hall & Club Room by using LGSF technology based on given line plan including all fittings and fixtures like doors, windows, tiling, false ceiling, painting, curtain rods,Mirrors Plinth protection, PCC saucer drain around bldg complete all as specified and as directed. Note-1.Provision of Green Building Norms for minimum GRIHA 3-Star Rating must be incorporated during design .Contractor shall hire consultancy/agency responsible for green building norms and shall provide min 3 star rating certificate.Rate of the same will be included in the quoted rate. 2.Internal Electrification & Internal Water Supply Item will paid under relevant schedule. 3.For Structural & Technical/architectural Specificaton refer the DBR(Detail Basis Report) attached in the Tender Document. |
| 5 | Design,supply, fabricate,errect, construction and execution of Company Office (SINGLE STORY)(Approx Plinth Area 107sqm) including sanitary block by using LGSF technology based on given line plan including all fittings and fixtures like doors, windows, tiling, false ceiling, painting, curtain rods,Mirrors Plinth protection, PCC saucer drain around bldg complete all as specified and as directed.Note-1.Provision of Green Building Norms for minimum GRIHA 3-Star Rating must be incorporated during design .Contractor shall hire consultancy/agency responsible for green building norms and shall provide min 3 star rating certificate.Rate of the same will be included in the quoted rate. 2.Internal Electrification & Internal Water Supply Item will paid under relevant schedule. 3.For Structural & Technical/architectural Specificaton refer the DBR(Detail Basis Report) attached in the Tender Document. |
| 6 | SCHEDULE A PART-II (DEMOLITION WORKS) |
| 7 | Dismantling of stone masonary built in CM incl all quions, pillars etc. |
| 8 | Dismantling of plain or corrugated steel sheeting , any gauge , any thickness in Roof covering. |
| 9 | Dismantling of timber scantling 40 Sq cm and over in any position as in unframed work. |
| 10 | Dismantling of boarding in any description fixed in any position with nails. |
| 11 | Taking down chowkats or frames With shutter (w/o taking of shutter from the frame) exc. 1.5 Sqm but n.exc 4 Sqm incl complete iron moungry |
| 12 | ditto- but n.exc. 1.5 Sqm |
| 13 | Dismantling wall and ceiling boards ( fibre, pulp, insulation,etc) or insulation boards/slabs/blankets, any thickness, incl cover fillets |
| 14 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level). |
| 15 | Dismantling of PVC water tanks 250 to 500 litres capacity |
| 16 | Dismantling of GI pipe line of 15 mm |
| 17 | Dismantling of GI pipe line of 20 mm |
| 18 | Dismantling of GI pipe line of 25 mm |
| 19 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for precast concrete articles complete all as spd & directed. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 21 | SCHEDULE A PART-III (RETAINING WALL) for details refer pdf folder |
| 22 | SCHEDULE A PART IV- A ( SITE CLEARANCE & EARTH WORK ) for details refer pdf folder |
| 23 | SCHEDULE A PART IV- B ( SITE CLEARANCE & EARTH WORK ) |
| 24 | Grubbing up tree trunk exc 30 cm deep and n exc 100 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site |
| 25 | Grubbing up tree trunk exc 100 cm deep and n exc 150 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site |
| 26 | Grubbing up tree trunk exc 150 cm deep and n exc 200 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site |
| 27 | Grubbing up tree trunk exc 200 cm deep and n exc 250 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site |
| 28 | Grubbing up tree trunk exc 250 cm deep and n exc 300 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site |
| 29 | SCHEDULE A PART V ( ROAD PATH AND CULVERT ) For details refer pdf folder |
| 30 | SCHEDULE A PART VI- A (SEWAGE DISPOSAL) for details refer pdf folder |
| 31 | SCHEDULE A PART VI- B (SEWAGE DISPOSAL) |
| 32 | M & L for 50 users convetional type RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection |
| 33 | M & L for 100 users convetional type RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection |
| 34 | Soakage wells for 3 M dia X 3.0 M effective depthexcavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size |
| 35 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes (6 Kg / Sqcm pressure rating) (single socketed in any length with rubber ring joints laid in trenches/floors or fixedto walls complete all as specified and directed. |
| 36 | S&F 110mm dia PVC (SWR) multi floor trap with SS grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed |
| 37 | SCHEDULE A PART VII ( AREA DRAINAGE ) for details refer pdf folder |
| 38 | SCHEDULE A PART VIII (COMPOUND WALL FENCING AND GATE) for details refer pdf folder |
| 39 | SCHEDULE A PART IX - A (EXTERNAL ELECTRIC SUPPLY) for details refer pdf folder |
| 40 | SCHEDULE A PART IX - B (EXTERNAL ELECTRIC SUPPLY) |
| 41 | Supplying, laying & testing cable XLPE insulated, screened, PVC bedded, galvanised steel srtip or wire armoured, electric power cables (heavy duty) with standrad aluminium conductor, 11000 volts grade (confirming to IS 7098) of 95 sqmm 3 core complete all as specifed and directed. Note;- The earth work, GI pipe shall be measured and paid sepretely under appropriate item of Sch A |
| 42 | Supplying, laying and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 70 sqmm 3.5 core complete all as specifed and directed. |
| 43 | Supplying, laying and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 50 sqmm 3.5 core complete all as specifed and directed. |
| 44 | Supplying, laying and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 35 sqmm 3.5 core complete all as specifed and directed. |
| 45 | Supplying, laying and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 16 sqmm 4 core complete all as specifed and directed. |
| 46 | Supplying, laying and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 10 sqmm 2 core complete all as specifed and directed. |
| 47 | Supply, installation, testing and commissioning of 100KVA 11KV/433V Dyn11 Copper Wounded Cast Resin Dry Type Transformer Package sub station Outdoor Type ,Transformer enclosure type-tested for IP23 and enclosure temperature class as K10 or better, made of Galvanized sheet steel housing in a combination of 1.5/2mm (2mm for Load Bearing and 1.5mm for non-load bearing) , Substation can be lifted with transformer installed, Enclosure painted with powder coating/polyurethane paint, Aesthetic, glossy/matt finish, HT and LT Compartment as IP54, copper wound, Class F insulation associated with winding temperature indicator,Dry transformer suitable for CSS Enclosure including supplying and laying of copper conductor multicore control cable from transformer to HT breaker for safety tripping suitably mounted on MS channel including supplying and grouting of suitable MS channels, with all accessories and conforming to IEC 62271-202.The rates shall be inclusive of foundation work. The contractor shall provide approved drgs of foundation from OEM. Makes Of CSS : Siemens Goa/Schneider Electric Vadodara/ABB Nashik.Note : a. CSS shall be supplied by OEM only, system integrator / JV Partners are not acceptable.b. HT switchgear, LV switchgear & Vacuum Interrupter shall be of same make as CSS OEM . - 01 No |
| 48 | The 11kV Outdoor Package Sub-Station shall be consisting of following:HT SWITCHGEAR :11kV, 630Amps 20KA for 3 Sec. SF6 insulated Non-Extinsible Compact switchgear (Type CCV) consisting of Two No's fixed Motorised load break switches (LBS) and one No. Fixed Motorised Vacuum Circuit Breaker(VCB) having inbuilt load break switch and earth switch within SF6 insulated robotically welded non ferrite non magnetic stainless steel enclosure of thickness 2.5mm having IP 67, with series trip,self powered microprocessor based numerical 3 O/C & 1 E/F relay (IDMTL + Inst.) protection. Interconnection between HT switchgear and transformer shall be using 1Cx3x95 sq.mm Al. unarmorured XLPE Cable. - 01 NoRelay shall be self powered of Ashida/C&S Make. ( 50,50N,51,51N) with RS485 communication port - 01 NoProtection CT shall be 40/1A 2.5VA 5P10. (Make: ECS/Ericon/Bharti Electricals/equiv) - 01 SetStandard Manometer (SF6 Gas Pressure Indicator) - 01 NoVoltage presence indicator (VPIS) for incoming Healthy Indications - 01 SetManual push button for breaker ON/OFF - 01 SetMechanical Indication for Breaker & LBS ON/OFF/EARTHED. - 03 NoOperating handle - 01 No24V DC battery 12Ah Capacity (Make: HBL/equiv) & Charger (Make: Alan/equiv) - 01 NoAll incoming modules of the RMU shall be capable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination kits shall be in the scope of purchaser only. |
| 49 | TRANSFORMER100 KVA 11kV/433V Dyn11 Copper Wound Cast Resin Dry Type (AN) distribution Transformer with Off Circuit Tap Links (Make: Approved vendors) - 01 NoOff Circuit Tap Links (OCTL), Tapping range +5% to -5% in a steps of 2.5% (4 Steps/5 Positions) Insulation Class: F, Temp. Rise Shall be 90 Deg. C Over an ambient of 50 Deg.C Temp. Transformer Losses: As per ECBC 2017.Max. Total losses at 50% loading : 940 W @ 120 Deg. C Max. Total losses at 100% loading : 2400 W @ 120 Deg. C% Impedance (%Z) shall be 4.5% (Subject to IS Tol.) - LT PANEL- 250 A Aluminium Busbar (100% for Phase & 50% for Neutrals) Current density 1amp/sqmm, having IP2X, Fabrication using 1.5/2mm CRCA sheet steel complete with internal wiring consisting of following.INCOMER From transformer 250Amps 4P 50Hz 36KA Fixed Manual Type Moulded Case Circuit Breaker (MCCB) with microprocessor based release for Overload (O/L), Short circuit (S/C) & Earth Fault (E/F) protection. - 01 NoLED type Indicating Lamp - RYB, ON-OFF-TRIP.(Make: TEKNIK/ BINAY/ ESSEN DEINKI) - 01 SetLT side metering CT 800A/ 5A, 5VA, Cl:1.0 (G&M/NEWTEK/Eq) - 01 SetDigital Multifunction Meter (MFM), CL-1.0 Accuracy with RS485 Port (Make:-CONZERVE/ RISHABH/ ELMEASURE/SECURE/Eq) - 01 No |
| 50 | OUTGOING100/125Amps 4P 50Hz 25KA Fixed Manual Type Moulded Case Circuit Breaker (MCCB) with microprocessor based release for Overload (O/L), Short circuit (S/C) & Earth Fault (E/F) protection. - 01 Nos63Amps 4P 50Hz 16KA Fixed Manual Type Moulded Case Circuit Breaker (MCCB) with microprocessor based release for Overload (O/L), Short circuit (S/C) & Earth Fault (E/F) protection. - 02 NosMCB SPN 01 No 'C' CurveOUTDOOR ENCLOSUREOutdoor type enclosure having construction of Galvanised Sheet Steel having 1.5mm thickness for Non-load bearing & 2 mm for Load bearing partition sheets & Door with HRCA 4 mm base frame. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment. The enclosure exterior shall be Powder Coated (Colour Light gray and dark gray ). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for MV & LV compartment. As per IEC 62271-202 - 01 SetINTERCONNECTION AND EARTHINGInterconnection Between HT switchgear & Transformer using 1Cx3Rx95 Sq.mm XLPE Single Core Aluminum Unarmored Cable & Interconnection between Transformer & LT switchgear using Aluminum Busbars with aluminum flexible. Internal earthing connections by using 50X6mm GI strips including Transformer Neutral. - 01 Set |
| 51 | Supply & fixing stay assembly complete with all accessories, such as stay plate 300x300x6mm, stay rod 215cm long and 20 mm dia with nuts including GI bow turn buckle etc., all as per Electrical plate No 1 or SSR -2009 Part I complete all as specified and as directed. Note. Loop type insulator, stay clamps, excavation, PCC will be measured and paid separately. |
| 52 | S&F Galvanised stay wire of size 7/4mm all as specified and directed. |
| 53 | M&L for loop type insulators vitreous porcelain white, brown or green large size with overall dimensions 65x90mm mm clearance of hole 25.5 mm complete all as specified and directed. . |
| 54 | Supply, transporting, erection and fixing steel tubular swaged pole, 09 metres long, type 410 SP-31, complete with MS base plate 6 mm thick, pole cap, finial taper plug, bolts, nuts, washers etc including necessary earth work and excavation, PCC in foundation 1:4:8 type D-2, using 40 mm graded stone aggregate and PCC 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth block, disposal of surplus soil to a distance not exceeding 50 m, painting two coats of aluminium paint over one coat of red oxide primer including 5 Nos band/straps with yellow and black colour in alternatete way (200mm wide each) enamelled paint two coat at a distance 300mm from plinth block and marking pole nos with black enamelled paint including tarring one coat on steel surface embedded in concrete complete all as specified and directed. Note : Required earth work, PCC foundation will be paid separetly under relevant items of Sch A. |
| 55 | Supply and fixing LED Street Light fitting 60 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corriosion resistant including thermal management in multiple optics complete with IP 65/66 protection, including connecting with 1.5 sqmm, 3 core, PVC insulated copper conductor cable 1100 Volts grade from pole box to light or from overhead conductor to light complete all as specified and as directed by Engr-in-Charge. |
| 56 | Supply and fixing bracket made out of 32mm bore, steel tubings, galvanised, light grade not less than 1.2 mtr long bend to shape with all fitting including fixed on pole with 02 Nos MS Clamp made out of F1 32x6mm complete all as specified and as directed |
| 57 | Supplying, streching and fixing of over head ACSR conductor any size ie. weasel,Ferret,and Dog and any type fixing on iron steel tubular pole including binding/jointing the conductor to insulator with and incl 14 SWG binding wire complete all as specified and directed. |
| 58 | Supply & fixing pin type porcelain insulator including one galvanised mild steel spindle , two galvanised iron washer and one galvanised iron nut, 100mm height, 65mm dia suitable for 1100V grade complete all as specified and directed |
| 59 | Supply, installation, commissioning and testing in replacement of HT 11 KV outdoor type gang operated triple pole air break switch suitable for Horizontal or vertical mounting fixed type complete with 12 insulator 200 amps rating and steel frame mechanically oprated mechanism consisting of operating rod of 25 mm bore light grade GI pipe of suitable length worked from ground level and with locking arrangement flat iron clamp 50 mmx6mm including MS channel of suitable size length for fixing GOD including bolts, nuts and washer complete all as specified and directed. |
| 60 | Supply, installation, testing and commissioning of Lighting Arresters Metal oxide type, distribution class with all fittings arrangements suitable to 11000 volts grade and discharge capacity 12 KV/10KA with and incuding lighting counter and cable of sutable size and core from lightning arrestor to ligting counter complete all as specified & directed. |
| 61 | S&F cable jointing kit 11 KV (Earthed) grade cable for outdoor termination Cold shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminum conductor cabe of size 95 sqmm , complete all as specfied and directed. |
| 62 | S&F cable jointing kit 11 KV (Earthed) grade cable for indoor termination Cold shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminum conductor cabe of size 95 sqmm , complete all as specfied and directed. |
| 63 | Material and labour for design ,supply, fabrication, Installation, testing and commissoning Factory made LT panel at outdoor type totally enclosed, dust and vermin proof, suitably ventilated, floor mounted, 415 volts, 3 phase and neutral, 50 Hz AC supply system, fully compartmentalized, both side openable, made out of 3.00 mm thick CRCA sheet, protection of enclousure IP-54 as per IS: 2147 of 1962 with pre-treatment and powder coated of approved colour including suitable frame work/support made out of suitable size angle iron/flat iron, front opening type with provision for cable entry, with proper ferrule and cable glands, internal wiring with PVC insulated multi stranded copper conductor FRLS cable of adequate size(minimum 1.5 sqmm), including required civil works/anchoring bolts for fixing, PCC foundation etc with and including following all as specified and directed. |
| 64 | Busbar Chamber: -Electrically grade shrouded aluminium bus bar of capacity 150 Amps for each phase and 100 Amps for neutral and current density 0.8A/Sqmm , including interconnection of all switch gears, fixed on DMC insulators and provision of extension.(Incoming)(a) MCCB 100 Amp, 415 Volts, 04 Pole 50Hz, 25 KA with adjustable thermal & magnetic release in built instantaneous protection, Ics = 100 % Icu(1 sec) - 01 Nos. (b) Ammeter 0 to 200 Amps digital type with built in selector switch, CTs of ratio 200/5A , 5va class 1.0 = 01 set. (c) Voltmeter 0 to 500 volts digital type with built in selector switch = 01 No (d) Phase Indication lamps (RYB), LED type - 01 No (set of three). (e) MCB SP 6 Amps 10 KA, for control protection RYB phase (set of 3)-01 set. (g) AC three phase LT/CT multifunctional energy meter of accuracy class-0.5, 3x240 volts 50 Hz, with optical and RS 232 port, backlit LCD display, measures and display, trivector energy and load survey, TOD temper detection and lodging power on/off events, instantaneous parameter of rating-5 Amps, with display in absence of power complete -01 No(Outgoing) Consist of separate compartment for each MCCB.-(a) MCCB 4 Pole 63 Amp, 415 Volts, 04 Pole 50Hz, 16 KA with adjustable thermal magnetic release in built instantaneous protection, Ics = 100 % Icu(1 sec) - 02 Nos . (c) MCB TPN 40Amp - 01 Nos (Spare) |
| 65 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4 mm GI wire as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size PCC 1:2:4 Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 66 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 32x6 mm GI strip as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 40 mm dia medium grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 67 | M&L for sand cushioning for under ground cable with layer of fine river dry sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. Note:- Punned (consolidated ) thicness of sand will be measured and paid sepetarely under relevent item of Sch. |
| 68 | S&F for cable protection bricks common burnt clay sub class 'B' designation 75 for protection of UG cable laid in trenches all as specified and directed. |
| 69 | SCHEDULE A PART X -A (EXTERNAL WATER SUPPLY) for details refer pdf folder |
| 70 | SCHEDULE A PART X - B (EXTERNAL WATER SUPPLY) |
| 71 | Supply and fixing Cast Iron Air Valves with two air Outlets, 50 mm dia bore and fixing Up in cast iron water supply mains |
| 72 | Supply and fix Valves, Sluice, flanged of class 1.6 PN ,80 mm (3”)dia. |
| 73 | M&L for Cutting of existing GI Pipe of size 80 mm dia and insertion of new 'T'' of size 80x 50 mm dia for branch connection complete all as specified and directed |
| 74 | SCHEDULE A PART XI- A (INTERNAL WATER SUPPLY) for details refer pdf folder |
| 75 | SCHEDULE A PART XI -B (INTERNAL WATER SUPPLY) |
| 76 | S&F fancy type chromium plated 15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for PP-R pipe or brass ferrule etc complete all as specified and as directed. |
| 77 | S&F CP health faucet with 1m flexible tube and wall hook complete all as specified and directed. |
| 78 | S&F CP overhead shower 100mm round/Square shape single flow (ABS body chromium plated with gray face plate) with rubit cleaning system fixed in 15mm bore of pipe complete all as specified and directed . |
| 79 | S&F 15mm dia brass CP wall mixer with provision for over head shower for mixing hot and cold water screwed down for PP-R pipe complete all as specified and directed. |
| 80 | S&F vitreous china squatting pan 'orissa pattern 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flushing pipe but incl fixing with 110mm S trap complete all as specified and directed |
| 81 | S&F vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes but incl fixing with 110mm S trap complete all as specified and directed |
| 82 | S & F vitreous china wash basin white (oval shaped under counter) of size 560 x 410 x 180 mm including 32mm brass CP waste coupling complete all as specified and as directed . |
| 83 | S&F Vitreous China Urinal, Half stall type,white with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal.complete all as specified and as directed |
| 84 | S&F PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and 32 mm flush pipe suitable for IWC/EWC of polyethylene of low or high density complete all as specified and as directed |
| 85 | SCHEDULE A PART XII- A (WATER TANK STAGING) for details refer pdf folder |
| 86 | SCHEDULE A PART XII -B (WATER TANK STAGING) |
| 87 | S&F 5000 litre three layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 88 | SCHEDULE A PART XIII- A (RAIN WATER HARVESTING) for details refer pdf folder |
| 89 | SCHEDULE A PART XIII- B (RAIN WATER HARVESTING) |
| 90 | M&L for drilling/boring vertical bores with reverse rotary rig are any other suitable method as per latest engineering technology practice without casing pipe with 202mm dia bit to a depth exceeding 30m and not exc 40m below and filling of pea gravels all round the lowered pipe etc complete all as specified and directed.Note:- (i) depth of boring shall be measured from of rechargewell (ii) pea gravels for filling shall be measured and paid for seperately. |
| 91 | M&L for Pea gravels of size 5 to 10mm for filling in bore holes and recharge well complete all as specified and directed. |
| 92 | M&L for stone boulders 50 to 100mm for filling in recharge well complete all as specified and directed. |
| 93 | S& F UPVC slotted pipe 150mm outer dia including bends and fittings etc placed in bore holes complete all as specified and directed. |
| 94 | S& F UPVC slotted pipe 150mm outer dia including bends and fittings laid in trenches complete all as specified and directed. |
| 95 | SCHEDULE A PART XIV- (REFRIGERATOR & AC) |
| 96 | Supply and fix refrigerator, electric driven (single phase), capacity 190/195 Litres .BEE 5 star rated |
| 97 | Supply and fix refrigerator, electric driven (single phase), capacity 310 Litres.BEE 5 star rated |
| 98 | Supply, Installation, commissioning of Metal Top Deep Freezer single phase 240 volt, 50 Hz 300/320 litre capacity |
| 99 | SCHEDULE A PART - XV- (HOT WATER SUPPLY) |
| 100 | Supply and fix electric water heater,storage type ABS body with inner tank mild steel tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, ISI Marked, 240 V, 50 Hz complete with all accessories such as safety valve, thermostate, NRV, PVC connection pipe, plug top complete all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender