Tender For Repair And Maintenance Of Dtgm And Sign Boards Of Runway And Taxi Track Under Ge (Nw) Vasco. (Tender Id No. 2026_Mes_784439_1)
Tender Value
44.99 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
9 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Dtgm And Sign Boards Of Runway And Taxi Track Under Ge (Nw) Vasco. (Tender Id No. 2026_Mes_784439_1)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of signage/DTGM board of size exc 1.00 sqm but n exc 2.00 sqm complete all as specified and directed by eng-in-charge Note:-Old signage board will be contractor's property as per schedule of credit. |
| 2 | All as per item NO. 1.00 above but exc 2.00 sqm but not exc 4.00 sqm |
| 3 | Supply of distance to go marker (1230mm x 1230mm) consist of two boards made of compressed aluminium sheet of 4mm thick blockodised on one side where the compressed aluminium sheet is supported in a frame made up of aluminium extrusion and the marking of the number / letter are of red retro reflective film on black background, having legs 03 Nos, breakable coupling, base plate & foundation Anchors (M-10, 150mm L) complete ready for installation on existing concrete foundation by drilling and shall comply with ADM Part 6 (Same in all respect supplied for MAFI Air force bases) Make: M/s AMA Pvt Ltd, M/s Honeywell Automation Ltd, M/s Three D Integrated Solutions Ltd, M/s YPR Engineering Solutions Pvt Ltd, Tata Power (SED) complete all as specified and directed. |
| 4 | Supply to sign board of illuminated LED guidance sign board with an all-aluminium weather proof study frames keep the electronics protected from environmental hazards and mechanical enclousure will have designed such a way that it can be opened for maintenance from the front without any special tools. the top edge should have heavy-duty hinges that open the front door towards the top side and to provide protection against dust and rain ingress and electrical connection of LED clusters should be designed in a such a way that failure of a particular cluster or a group of clusters only marginally affects the illumination of the signage. CONTD TO 4.01 |
| 5 | LEDs need to have more than 50,000 hours of operational life and do not heat up and electronics should be capable for operation from -20 C to +55 C and signboard shall be uniformly internally illuminated with required LEDs to achieve uniform illumination level and operated on AGL circuit without flickering including supporting frangible legs, clamps etc & sign shall comply as per ICAO Annex. 14 Vol I, ADM part 4 and ADM part 6. and connection to sign board including all necessary fitting like electrical cable with flexible pipe cover, required connector, wires etc.Make of sign board shall be Make: M/s AMA Pvt Ltd, M/s Honeywell Automation Ltd, M/s Three D Integrated Solutions Ltd, M/s YPR Engineering Solutions Pvt Ltd, Tata Power (SED) complete all as specified and directed or approved by GE.Note:- Testing shall be done to the entire satisfaction of Engineers-in-Charge (both B/R & E/M portion) |
| 6 | All as per item No. 4.00 including 4.01 above but Single sided boards |
| 7 | All as per item No. 4.00 including 4.01 above but Double sided boards |
| 8 | Supply and fix breakable coupler for guidance signage's as per ICAO standard for airports complete all as specified and directed by eng-in-charge. |
| 9 | Supply and fix bird spike for sign boards/DTGM boards (size in inches: 12L X 4B X 4H) (spike cost included in the rate) of polycarbonate material complete all as specified and directed. Make: Birdflee, Metalcraft, Benavji. |
| 10 | Installation of sign board and leg on the existing foundation by drilling & stainless steel anchoring (Anchor cost included) complete all as specified and directed. |
| 11 | Installation of sign board additional leg on the existing foundation by drilling & stainless steel anchoring at same location (Anchor cost included) complete all as specified and directed. |
| 12 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for (Below or above ground level) and removing the deteriorated concrete slab from its position and removing to a distance exc 1.50 KM and n exc 5 KM complete all as specified and as directed. |
| 13 | M & L for providing cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) as a foundation, filling and mass concrete complete all as specified and directed by eng-in-charge. |
| 14 | M & L for rendering 10mm thick in CM 1:4 on brick work or concrete surfaces complete all as specified and directed by eng-in-charge. |
| 15 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20CM wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exc 5CM but n exc 10CM wide rough finished complete all as specified and directed by eng-in-charge. |
| 16 | M/L for preparation of New surface of wall plastered including cornices and pillasters etc and applying two coat of cement base paint on wall over chalk whiting all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender