Tender For Repair And Maintenance To Boundary Wall, Footpath, Drain Fencing, Hardstanding In Bairagarh Under Ge Bhopal
Tender Value
45 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
9 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Boundary Wall, Footpath, Drain Fencing, Hardstanding In Bairagarh Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base concrete incl of concrete and paving n.exc 15cm thick (below or above GL) complete all as specified and directed. |
| 3 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | M & L for 25mm thick PCC 1:2:4 type B-1 using 20mm gradded stone aggregate as in levelling course complete all as specified and as directed. |
| 5 | M&L for multicolour outdoor heavy duty parking tiles 9 -10 mm thick size 400x400 mm matt for outdoor area, jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles complete all as specified and directed incl dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. complete all as specified and directed and as approved by GE. |
| 6 | M&L for glazed tiles , coloured 300x450 x 6 to 7 mm thick as in skirting/dado over & including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement incl Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises compelte all as specified & directed all as specifeid & directed . |
| 7 | M&L for hard core of broken stone of gauge not exceeding 63 mm, deposited, spread & levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 8 | M&L for laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 9 | M&L for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 10 | M&L for cement concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in bed blocks, copings, kneelers, apex stones, bed plates, lintels and the like etc complete all as specified and as directed. |
| 11 | M&L for 75 mm thick PCC 1:2:4 type B1 using 20 mm stone aggregate as in Plinth protection/hardstanding and finishing the surface even and smooth with out using extra cement incl demolition of cement concrete and removal of debrises from the premises.complete all as specified and directed. |
| 12 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed. |
| 13 | Forming 12mm thick Expansion joints filled with pre-formed bituminous fillerand top 30mm primed and sealed with sealing com pound, Grade ‘A’ |
| 14 | S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh similar work Confirming to Fe-290 Gde E-165 including dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, masonry, brick work,etc all as specified. |
| 15 | Excavating in post holes in any type of soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, incl removing of surplus soil complete. |
| 16 | M&L Plain cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified. |
| 17 | S&F GI chain linck fencing , Chain link MS galvanisd fencing, anysize or type including dismantling of old rusted fence.Complete all as specified and as directed. |
| 18 | S&F mild steel round bars 10 mm dia and over cut to length bent to shape required and all as specified conforming to gde Fe 410- W (Gde E-250) quality A for securing chain link fencing complete all as specified. |
| 19 | M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in CM 1:6 incl Demolition of brick or stone work, built in cement mortar including all quoins, arches, pillars etccomplete all as specified and directed. |
| 20 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 21 | Returning filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as sspecified and directed. |
| 22 | M&L for moorum, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and directed. |
| 23 | Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed. |
| 24 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 25 | M&L for use and waste formwork to sides of concrete foundation , footing, base of column , raft, raft beam sides and soffits of foundation and, walls, plinth beam for rough finished surfaces of concrete complete all as specified and directed |
| 26 | Use and waste formwork Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed |
| 27 | Use and waste formwork Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed |
| 28 | M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 using 20mm graded stone aggregate on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like incl Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed. |
| 29 | M&L for 15mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed. |
| 30 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 31 | M&L for steel gate, including pintle hinges, stops, hand-made sliding bolts, etc. framed work, forged into spikes; framed guard bars; barred iron doors; and drilled for fixing of steel sheeting or other covering similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 32 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-24 complete all as specified and directed. |
| 33 | M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed. |
| 34 | M&L for 15mm thick rendering in cm 1:4 faces of brick or concrete surfaces(external surfaces) finished fair, even and smooth without using any extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description complete all as specified and directed by Engr in Charge. |
| 35 | M&L for 15mm thick rendering in cm 1:4 faces of brick or concrete surfaces(External surfaces) mixed with water proofing compound finished fair, even and smooth without using any extra cement complete all as specified and directed by Engr in Charge. Note :- Water Proofing compound shall be measured and paid seperately) |
| 36 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl prep of new surface. complete all as specified and directed. |
| 37 | All as per item No. 35.00 here-in-before but complete removal of treatment. complete all as specified and directed. |
| 38 | M&L Pre Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick AZ-150 of an colour having tensil strength of 550/MPA as in roof covering/cladding to wall/ ridge,fixed with self tapping screw/L type or J type cranked hook bolts including dismantling Plain or corrugated steel sheeting,any gauge, thickness, includingNainital or similar pattern roof coverings/wall cladding all as specified and directed by Engr in Charge. |
| 39 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick AZ-150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws including dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings/wall cladding as specified |
| 40 | M&L for Walling of random rubble masonry brought in course built in cm 1:6 incl Demolition of stone work, built in Cement mortar including all quoins, arches, pillars etc all as specified and directed by Engr in Charge. |
| 41 | All as per item no. 39 here-in-before but except stone all as specified and directed. |
| 42 | M&L for manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 asapproved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows (Structural frame work including M.S. plate to be provided separately) |
| 43 | M&L providing and fixing stainless steel (Gd-304) railing made of hollow tubes, channels, including welding , grinding, buffing, polishing,and making curvatures, fittings with SS nuts, bolts,fastnersand accessories of required size, as approved by Engg-in-charge. |
| 44 | S&F Reinforced concrete pipes, class NP2, bore of pipe 300mm laid and jointed complete with collars all as specified and directed. |
| 45 | M&L for preparation of old painted concrete surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 46 | M&L for cement concrete 1:3:6 type D-2 (using 40 mm graded stone aggregate) as in surface channel and drains complete all as specified and directed. |
| 47 | Deduct Schedule of credit (calculation will be done off line) Rs. 71087.50 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender