Tender For Addn/Altn To House No 98A, 79A, 213/2, 194/1, 55A, 64A, 27A, Pine 01, Pine 02 & Pine 08 Under Age B/R I At Chandimandir
Tender Value
45.28 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
3 days left
EMD
90560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To House No 98A, 79A, 213/2, 194/1, 55A, 64A, 27A, Pine 01, Pine 02 & Pine 08 Under Age B/R I At Chandimandir
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Glazed coloured printed tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 3 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 4 | Vitrified Ceramic tiles light shade 10 mm thick First quality (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 5 | All as per serial item No 4 herein before but on skirting etc over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 6 | Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 7 | Rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. |
| 8 | Rendering 15mm thick plaster in cement mortar 1:6 on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. |
| 9 | Taking down chowkhat n.exc 1.5 sqm each with or without taking off shutter and removing from site complete all as specified and as directed. |
| 10 | Taking down chowkhat exc 1.5 sqm each but not exc 4.00 sqm with or without taking off shutter and removing from site complete all as specified and as directed. |
| 11 | Taking down shutter exc 1sqm but n.exc 2 sqm each & removing from site complete all as specified and as directed. |
| 12 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 13 | 150mm aluminium barrel tower bolt (ISI Marked) of extruded section complete all as specified and directed |
| 14 | Aluminium handle, cast type anodized of size 150 mm, complete all as specified. |
| 15 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.Note:- (I) Thickness of powder coatings shall be not less than 30 micron.(ii) Weight of the aluminiumnsections only shall be measured and paid.(iii) Aluminium doors window/ ventilators to be fixed to jambs with cadmium plate screws.(iv) The rate shall be inclusive of neoprene beadings, handles, hinges, screws etc. weight of fittings/fixtures will not be measured for ariving the weight of aluminium section.(v) Glass panes and panels shall be measured & paid separately under respective items. Design shall be approved from Engineer-in Charge as existing at sitebefore fabrication and bulk order to the manufacturer. |
| 16 | Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 17 | 4.80mm thick ordinary quality tinted glass, fixed to frame work not exc 0.5 Square Metre in each pane, complete all as specified & directed. |
| 18 | 4.80mm thick ordinary quality tinted glass, fixed to frame work exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 19 | 3mm thick Sheet glass, ordinary quality n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames , concrete or brick surrounds, with necessary fixing arrangements complete all as specified and as directed.. |
| 20 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified & directed. |
| 21 | 15mm bore angle valves, cast copper alloy, fancy type chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions, fixed as in repair complete all as specified and directed. |
| 22 | 15mm bore Bib taps, cast copper ally, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair all as specified and directed. |
| 23 | Plastic water closet seat cover, white closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed. |
| 24 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, fixed as in repair, complete all as specified and directed. |
| 25 | wall/sink Mixer, for mixing hot & cold water screwed down for iron pipe and fixed, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed |
| 26 | WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 27 | Towel rail 600mm long of chromium plated fixed with and including chromium plated screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 28 | Brass chromium plated shower rose, 125mm size with long swivel plush CP armm, fixed as in repair complete all as specified . |
| 29 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed as in repair complete all as specified . |
| 30 | PVC connections 15mm size with PTMT nuts of length 450mm, fixed as in repair complete all as specified and as directed. |
| 31 | Vitreous China wash down Single piece EWC water closet pan alongwith cistern (pedestal pattern), white (with all fittings) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. fixed as in repair complete all as specified and directed. |
| 32 | Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth applying two coats of sythetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified & directed. |
| 33 | 75mm thick PCC type D-2, 1:4:8 using 40mm graded aggregate as in sub base etc. complete all as specified and directed |
| 34 | Providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed. |
| 35 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 36 | Factory made Machine pressed, rubber moulded, pre polished (glazy finish), coloured, precast conctete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with Grey cement and pigment complete all as specified and directed. |
| 37 | Cement concrete 1:2:4 Type B 1 (using 20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, back fill of chowkhat, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided, water trought and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 38 | 1.50 mm thick Fibre glass reinforced translucent plain coloured sheeting with fixed with coach screw and washer in roof, wall, fencing etc complete all as specified and as directed. |
| 39 | Mild steel work as in iron post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 40 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 41 | Rolled sections as in main and cross beams, columns , hip and jack rafters; purlins where connected to common rafters of angle , pipe sections etc , Fe 410 Gde 250 quality B complete all as specified and as directed |
| 42 | Dismantling boarding, any type and any description, fixed in any position with nails all as specified and directed. |
| 43 | 18 mm thick HDHMR Board for Modular kitchen as per approved design manufactured from hardwood and having uniform density gradient & compact core with density over 850 kg/m3, prelaminated both side, complete all as specified and directed by Engineer-in-charge. |
| 44 | Food grade stainless steel wire in any baskets of a moduler kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley, plain basket, bottle pull out etc), min loading capacity 65 KG, made by min 6 mm dia stainless steel round bars, proper welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per design approved, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, SS screw etc complete all as specified and directed by Engineer-in-charge. Note : 1. Weight of fitting/fixtures like handles, hinges, ball bearing runners, telescopic channels etc will not be measured. 2. Only weight of SS wire basket will be measured before fixing.3. Only Fixing of all Fitting/fixtures like handles, hinges, ball bearing runners, telescopic channels etc are included and will be paid under saperate items as supply only. |
| 45 | Supply only of soft auto closing hinges openable at 0 degree for kitchen cabinet shutters Make; ( Hettich, Ebco, Prime ) |
| 46 | Supply of Ball bearing runners 45 mm soft closing Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs, Black powder coated, Make; ( Hettich, Ebco, Prime ) |
| 47 | Metal profile section for each shutter in kitchen cabinets either below or above slab complete all as specified |
| 48 | Surface dressing n exc 15cm deep hard and dense soil and getting out complete all as specified and as directed |
| 49 | Mild steel framed work as in view cutter, or ladders gates of angles or other sections with gusset plates, ladders, complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe 410-W (Gde E- 165) complete all as specified and directed. |
| 50 | Taking up or down steel tubing and connections 15mm bore, including cleaning for refixing or removal to store complete all as specified and directed |
| 51 | 15mm bore tubes “medium grade”, galvanized, with and including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 52 | Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket to connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 53 | 25mm dia curtain rails, stainless steel with fixing brackets, stops, end rollers etc. for curtain rod including taking down defective bracket alogwith rod all as specified and as directed. |
| 54 | Factory made 18mm thick solid WPC (wood polymer composite) board of density 650kg/cum of one side prelaminated/rigidlam with any colour (Except White) and other side balancing lamination, as in cupboards/kitchen/ cabinet shutter/ drawers etc fixed with screws, sovent cement, adhesive complete all as specified and directed. |
| 55 | Magnetic cathcher for kitchen cabinet/ cupboard fixed as complete all as specified and as directed. |
| 56 | Continuos piano hinges, mild steel bright finish width of flap 30mm, complete all as specified and as directed. |
| 57 | 15 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 58 | Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed. |
| 59 | Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed. |
| 60 | Excavation in trenches n.exc 1.5m in depth and 1.5m in width and getting out in hard'dense soil complete all as specified and directed. |
| 61 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed. |
| 62 | Removing excavated material (soil) outside MOD land and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and directed. |
| 63 | Reinforced cement concrete, type A-1, 1:1½:3 (nominal mix, using 20mm graded crushed stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed. |
| 64 | Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and directed. |
| 65 | Mild steel TMT bars 10mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed. |
| 66 | All as per serial item No 65 hereinbefore but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders compelte all as specified and directed. |
| 67 | Preparing newly plastered surfaces of wall and applying complete wall with 2mm thick POP/ Birla wall care putty and make smooth surfaces applying two coat of Oil Bond distemper over an coat of primer etc all as specified and directed. |
| 68 | Preparing plastered new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Square Metre over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Square Metre over new surfaces incl necessary scaffolding and safety arrangements complete all as specified and directed. |
| 69 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering and consolidation complete all as specified and directed. |
| 70 | False ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm, cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with 3mm dia Gi wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction including taking down old ceiling make of GI grid work : armstrong/swastik /techno grid make of 'E' board : everest/indian gypsum /armstrong or equivalent approved . |
| 71 | 125mmx60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of cement concrete 1:3:6 type C1 in frame complete all as specified and as directed. |
| 72 | 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 73 | 35mm 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 74 | 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 75 | Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 76 | 75 mm thick PCC 1:3:6 type C-1 (20 mm graded stone aggs) as in flooring, plinth protection including finishing surfaces even and smooth without using extra cement complete all as specified. Note : 10mm construction joint will be provided and Panel should not be more than 3 m in length and joint filled with filler bitumen and sand in ratio (1:3), complete all as specified and directed. |
| 77 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 78 | Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed non metalic PVC conduit of suitable size but not less than 20mm dia with all fittings terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account. |
| 79 | All as per serial item 78 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed |
| 80 | All as per serial item 78 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed |
| 81 | All as per serial item 78 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor |
| 82 | Switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed. |
| 83 | Switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed. |
| 84 | Switch modular type (ISI marked), single pole, two way 6 Amps, one module (ISI marked), complete all as specified & directed. |
| 85 | Modular switch type bell push, single pole, 230 volt one module,(ISI marked) complete all as specified and directed. |
| 86 | Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose two module (ISI marked), complete all as specified & directed. |
| 87 | Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. |
| 88 | Call bell multi music type AC 230 Voltts single pole complete all as specified and directed. |
| 89 | Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge. |
| 90 | Modular type stepped fan regulator, single pole, 230 volt two module complete all as specified and directed. |
| 91 | LED lights batten fitting 1x 20W, 220V,AC, 6500K, with aluminium housing and diffuser with elegantly designed end caps including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete fixed as in repair complete all as specified and directed. |
| 92 | Inverter type LED tube light batten 4 ft. 1 x 18/20 watt, 230 volts, Inverter type inbuilt Lithium ion battery with charging time 8 to 10 Hrs and back up time minimum 4 Hrs complete including fitting fixed on wall/ceiling and connection up complete with flexible cable white of suitable size and making necessary connection, complete all as specified and directed. |
| 93 | LED inverter batten light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 94 | LED Mirror Lights fitting 17 watt cool/ warm white of approx size 534 x 93 x 33 mm , 220V AC decorative/model including fitting fixed on wall/ceiling and connecting up complete with flexible cable white of suitable size and making necessary connection fixed as in repair complete all as specified and directed. |
| 95 | LED Bulkhead luminaires 1 x 9/10 Watt fitting in engineering plastic housing with clear prismatic diffuser complete with all accessories and connecting up with flexible cable white of suitable size and making necessary connection, fixed as in repair complete all as specified and directed. |
| 96 | LED Industrial outdoor type Bulkhead luminaires,IP rating not less than 45, highly resistant to dust and water 1 x 9/10 Watt fitting in engineering plastic housing with clear prismatic diffuser complete with all accessories and connecting up with flexible cable white of suitable size and making necessary connection fixed as in repair complete all as specified and directed. |
| 97 | LED 18W surface mounted indoor type back lit downlighter suited for any modern workspace of size not less than 6\\" to 8\\" round/square, fixed as in repair complete all as specified and directed. |
| 98 | Decorative outdoor wall light LED 12 watt warm white, mygarden black & stainless steel body, flush mount type IP44 protection, fixed as in repair compelte all as specified and directed |
| 99 | LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection incl mounting bracket of suitable size and connection, fixed as in repair complete all as specified and directed. |
| 100 | LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection incl mounting bracket of suitable size and connection, complete all as specified and directed. |
| 101 | Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed. |
| 102 | Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces by providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. |
| 103 | Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 10 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 10 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces by providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note for serial item No 102 & 103 : (i) Two runs of cable, one run of earth wire shall be considered as one running metre(ii) Cutting chases will be measured and paid separtely(iii) colour code shall be Red for phase, Black for neutral and green for earth |
| 104 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed . |
| 105 | Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, Complete all as specified and directed . |
| 106 | MCB distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral link, complete all as specified and as directed. |
| 107 | MCB, SPN , 240 volt, 40 to 63Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 108 | MCB, SPN , 240 volt, 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 109 | MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 110 | Taking down carefully old unserviceable ceiling fans/wall fan /exhaust fans complete, removing its blade and deposit to the MES Store yard for serviceabilty check and further board of action, complete all as specified and directed. |
| 111 | Exhaust fans for kitchen with louvers 300 mm sweep, 1400 RPM, Heavy duty single phase 240 Volts, AC 50 Hz, steel body and connecting up including louvers including making necessary opening on stone /brick masonry wall of suitable size, finishing it properly and making good with matching colour with the surroundings with and including provision of cable 3 core of suitable size from ceiling rose to fan complete all as specified and as directed. |
| 112 | Wall Mounted fans for kitchen dacorative type 400 mm sweep, 230V AC Supply, 50 Hz, high performance, smooth oscillation, copper bound motor made of sturdy Engineering plastic and metal ribs guard complete as per complete all as specified and as directed. |
| 113 | Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and provision of flexible copper cable 3 core from ceiling rose to fan complete all as specified and directed. |
| 114 | Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps , 240 Volts for AC/Geyser point complete all as specified and as directed. |
| 115 | Supply , installation, testing and commissioning of electric water heater (Geyser), storage vertical or horizontal type as approved , BEE 5 star rated, 25 litre capacity, 230 volts AC, 50 Hz comprising of high voltage heating element upto 2 KW for instatnt heating, ABS tech/ Engineering thermoplastic body or steel/ metal body of steel inner tank with corrosion resistance coating , rust and shock proof with and including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surfcae including PVC connection & electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable / flexiable chord with plug complete all as specified and directed. |
| 116 | Auto clean glass Chimney with invertor technology, Suction Capacity 1400-1500 m3/h, Filterless tech 6062 BLDC, size approx 90cm AC, multiple speeds control Brushless powerful DC motor, Touch controls with motion sensor, wave and start, Stainless Steel body black colour with LED Light including Flexible adjustable to length PVC Pipe 150 mm for fixing in wall inside with proper wall hole and PCC work and outside for exhaust cooking air through chimney with louvers complete all as specified and directed. Make : as approved by GE |
| 117 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge. |
| 118 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth , complete all as specified and directed. |
| 119 | Removal of excavated material outside MOD land and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed. |
| 120 | 32mm outer dia, double walled corrugated (DWC) HDPE duct pipe pipes of pressure rating 6 kgf/sq. cm conforming to IS 14930 Part-II with anti rodent and non flame propogating properties of approved colour with fittings for cable protection from approval make complete , all as specified and directed |
| 121 | Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm, 2 core, laid in trenches , sleeving through pipes of fixed on poles & wall or laid under floors inlcuding jointing with suitable size of alumunium lugs as specified and directed. |
| 122 | Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways, including taking down existing earthing complete all as specified & directed. |
| 123 | Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways, complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender